:::RHMT::: Real Home Made Turbo

General Category => Engine Management => Topic started by: hard2obtain on December 23, 2016, 06:31:28 PM

Title: Lil Knock gauge settings
Post by: hard2obtain on December 23, 2016, 06:31:28 PM

Anyone have experience on this knock meter? i just bought one but i don´t feel comfortable with knock readings on my D15 civic turbo.   

Im tuned to 17 degrees total timing at 11psi and 11.1 afr on wot and it showns heavy knock at 6-7k, maybe engine noise, setup are garrett t3-t4 .60 and 28x7 fmic, engine is low compression to prevent knock, double headgasket, 120psi all around.   Knock sensor is mounted in front of engine the red spot.

My settings are Frequency 7.63 and .267 gain, 4cilynder.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fcimg7.ibsrv.net%2Fgimg%2Fhonda-tech.com-vbulletin%2F180x320%2F80-knock_gauge_3_5f6f093767dd20564447aa16233e9724a98d9f2d.jpg&hash=df0a0ba0e10098ea5130a25ab04ffa173589a955)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fcimg9.ibsrv.net%2Fgimg%2Fhonda-tech.com-vbulletin%2F400x319%2F80-knock_settings_e81b0add257df2f24c114e97b84fbf95435e1480.jpg&hash=58e8f9bb78ae8fdb1fa92dac0dba4e8cdcc171d9)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fcimg8.ibsrv.net%2Fgimg%2Fhonda-tech.com-vbulletin%2F503x396%2F80-knock_sensor_location_95155b37d4ba4b982a54bd803bbcf63183178929.jpg&hash=523598b1823c8cdb6137604cefc11f2408f3698d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fcimg6.ibsrv.net%2Fgimg%2Fhonda-tech.com-vbulletin%2F720x960%2F80-low_comp_dae655c2ff7f1b90e77df8ba29b68f7fc3c24760.jpg&hash=ab353c5f64b61d29020f8fdfd8aa0c02d13171b6)

Title: Re: Lil Knock gauge settings
Post by: nig nog on December 24, 2016, 01:27:57 AM

I really doubt that box is capable of the sort of DSP required to accurately detect knock.

An hours dyno time would get you further for less,