:::RHMT::: Real Home Made Turbo
General Category => Hybrid/Tech => Topic started by: marcj on June 07, 2009, 01:06:45 PM
-
I am toying with the idea of running the integra A/C condenser setup in my coupe. basically I made a sinktrap (top mount) and it clears the A/C compressor with plenty of room, but the large turbo sits where the a/c lines go.. so I've been looking at the integra condenser and how it sits in the area between the intercooler and the radiator.. if it bolts up at the fire wall I believe I could make it work..
so, can anyone that has A/C setup for an integra take some detailed pictures of the condenser setup? I really need to see how it bolts up at the firewall
-
nevermind.. i'm going to just hit the yard and get what I need, and go from there.. hopefully it wont be a waste of time. FL heat is killing me!
-
i have an Integra? anyway, its not gonna work. one of the AC lines is in the same spot as the EK. the one with the low side nipple on it. its gonna be wanting to sit where your turbo is...
-
AC is for pussies.
You can't complain much dude, you live towards the main land so humidity there isn't anywhere near as bad as down south. I would know.
-
AC is for pussies.
You can't complain much dude, you live towards the main land so humidity there isn't anywhere near as bad as down south. I would know.
overall it's not bad; it's sitting in rush hour traffic at a dead stop with hundreds of cars in a row heating up the air in your face :?:
i have an Integra? anyway, its not gonna work. one of the AC lines is in the same spot as the EK. the one with the low side nipple on it. its gonna be wanting to sit where your turbo is...
dammit.. I wonder if there is a way to do custom lines.
-
dammit.. I wonder if there is a way to do custom lines.
A competent AC shop should have no problem doing custom lines.
-
A competent AC shop should have no problem doing custom lines.
+1
-
personally i would just bend the shit out of them till they work the way you want.