:::RHMT::: Real Home Made Turbo
General Category => Engine Management => Topic started by: Platinum8317 on June 13, 2009, 11:20:01 AM
-
I was looking around and found this. "Winbond W27C512-45Z" Can people please take a look at the data sheet and comment. Thanks.
Data sheet:
http://www.datasheetcatalog.org/datasheets2/16/165171_1.pdf (http://www.datasheetcatalog.org/datasheets2/16/165171_1.pdf)
-
You can still get the 27sf512
-
I do know that. But what about in a year or two. Supplies will decrease alot and price will sky rocket on the 27sf512. this is just a replacement that is still in production. It's just a future thought, not an imediate replacement.
-
I do know that. But what about in a year or two. Supplies will decrease alot and price will sky rocket on the 27sf512. this is just a replacement that is still in production. It's just a future thought, not an imediate replacement.
Who cares what happens to chips in a year or two.
As always, technology advances, prices on current shit goes down and new shit that's better takes it's place.
-
i got teh chippz for you mr. platinum. let me know how many you need.
Im shipping out a lot of orders tomorrow after noon. let me know!
-
How many chips you have?? I need some, if you could send me a price.
-
How many chips you have?? I need some, if you could send me a price.
i have a few hundred left.
pm me your name and number
http://www.realhomemadeturbo.com/forum/index.php?topic=2452.0 (http://www.realhomemadeturbo.com/forum/index.php?topic=2452.0)
-
i got teh chippz for you mr. platinum. let me know how many you need.
Im shipping out a lot of orders tomorrow after noon. let me know!
thanks but in my looking and asking around i found 10 for 2 a peice. if i need more later I'll keep you in mind. I'm sure i will. Thanks again.
-
So has anyone found a direct replacement of the SST chips yet and knows they work with a moates burner?
I don't feel like buying a chip at $4 each from anyone. They were like a little over a dollar each from mouser.
-
So has anyone found a direct replacement of the SST chips yet and knows they work with a moates burner?
I don't feel like buying a chip at $4 each from anyone. They were like a little over a dollar each from mouser.
my supplier knows that they are gold right now. honestly im really not making shit out of the people that buy big quanities.
my supplier wont even take paypal. I gotta send him $$$ via western union and shit
-
They were almost 2 bucks a pop at mouser the last time I ordered them and you also have to pay ground shipping too so if your only buying a couple its 4-5 bucks a pop
I have been finidng them all over my shop since i quit chipping ecu's after every kid in town started doing it.
-
a few pennies over $2/each including shipping
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140325368383&category=4663&refid=store (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140325368383&category=4663&refid=store)
-
a few pennies over $2/each including shipping
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140325368383&category=4663&refid=store (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140325368383&category=4663&refid=store)
support your local RHMT sponsors. FUCK EGHEY!
-
I'll stick to my 4mbit chips & 32-to-28 pin adapters I've made, aka "16timer".
Makes testing different timing way easier.
-
No, Ostriches do. :P
-
When you have an idea what timing should be, make the maps before hand (which takes just as much time, same process), then compile them into a 4mbit file in half a second, I'd have to say it is quicker. Of course that doesn't take heatsoak into consideration, regardless I'm faster at turning a dial 22.5 degrees than opening a file (or changing some cells) then uploading to the ostrich.
Sometimes I miss crome in that respect.
-
The speed at which you can change canned solutions is irrelevant to my point.
-
The speed at which you can change canned solutions is irrelevant to my point.
As your point was to this thread.
-
That is beside my point, sir.
-
That is beside my point, sir.
Fair enough.