:::RHMT::: Real Home Made Turbo

General Category => Engine Management => Topic started by: lilpooh21186 on June 16, 2009, 01:42:51 AM

Title: crome 1.5.3
Post by: lilpooh21186 on June 16, 2009, 01:42:51 AM

anyone else having  a bitch time getting this verson to Datalog. Using Hulog?

Title: Re: crome 1.5.3
Post by: d112crzy on June 16, 2009, 02:01:02 AM

Never had an issue with the new version. Been using it since it came out. I use a serial datalogging cable tho. It connects EVERY time.

Title: Re: crome 1.5.3
Post by: jagojon3 on June 16, 2009, 02:04:50 AM

Works perfect

Title: Re: crome 1.5.3
Post by: lilpooh21186 on June 16, 2009, 12:07:42 PM

it was working fine before my laptop crashed now it wont connect i just didi that ftdi clean so mabey that will take care of the problem

Title: Re: crome 1.5.3
Post by: lilpooh21186 on June 19, 2009, 09:53:05 PM

the clean fixed everything.

Title: Re: crome 1.5.3
Post by: BangBusMaster on June 25, 2009, 01:04:29 AM

What is this ftdi clean you speak of?

Title: Re: crome 1.5.3
Post by: ifly87 on June 25, 2009, 03:06:08 AM

I could never get the hullog to work, i just bought a serial to usb converter at radio shack and use that, it works every time.

Title: Re: crome 1.5.3
Post by: lilpooh21186 on June 25, 2009, 12:53:20 PM

please excuse the link. it basicly searches for all usb-serial drivers and removes them some times an old driver will have conflict with a newer one.  http://www.xenocron.com/install/USB-Board.htm (http://www.xenocron.com/install/USB-Board.htm) scroll down click FTDI clean utility

Title: Re: crome 1.5.3
Post by: Tim on June 25, 2009, 02:27:45 PM

Quote from: lilpooh21186 on June 25, 2009, 12:53:20 PM

please excuse the link. it basicly searches for all usb-serial drivers and removes them some times an old driver will have conflict with a newer one.  http://www.xenocron.com/install/USB-Board.htm (http://www.xenocron.com/install/USB-Board.htm) scroll down click FTDI clean utility

does it only do ftdi ones?

I think I need to use this but don't want to fuck myself.  I'm tuning machines at my work and each one is set up basically like an ostrich with the ftdi usb-uart chipset.  I plug in one machine that has anywhere from one to 12 of these little boards in there and they're loading on ports like 53, 54, 56... Doesn't bother me till I go to use my car shit and some software only looks for ports <4 etc.  I'm stuck manually moving ports etc I assume I just have a shitload of ports tied up from machines' I've already tuned and shipped?

I just don't want it to fuck all my non ftdi devices

Title: Re: crome 1.5.3
Post by: lilpooh21186 on June 28, 2009, 09:25:41 PM

in that case i personaly wouldnt risk it. cuzx i belive it wipes them all out.