:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: 10secdseries on July 14, 2009, 07:17:06 PM

Title: d series ring gap with wisecos
Post by: 10secdseries on July 14, 2009, 07:17:06 PM

about to put my motor together a6 block 20 over wiseco pistons and rings just wanna no what the ring gaps are suposed to be

I <3 teh penis

Title: Re: d series ring gap with wisecos
Post by: That Guy on July 14, 2009, 08:04:46 PM

Check the manufacturers instructions that came with the pistons, or their website. Also, check a dictionary  :mexi:

Title: Re: d series ring gap with wisecos
Post by: jeffsciv23 on July 15, 2009, 04:19:23 PM

this will help but its for 81mm so you have to just replace that number with 75.5 or whatever your is.

http://www.laskeyracing.com/shop/ringgap.htm (http://www.laskeyracing.com/shop/ringgap.htm)

ill even do the math in case your version of windows didnt come with a calculater  ;)


Upper ring gap
006" x 2.972 = .0178 so just say .018

Second ring gap
0065" x 2.972 = .0193 so say an even .019


 :-*