:::RHMT::: Real Home Made Turbo

General Category => Engine Management => Topic started by: JACER63 on July 22, 2009, 07:44:52 PM

Title: vtec press selinoid.....
Post by: JACER63 on July 22, 2009, 07:44:52 PM

any one know how to get rid of the cel if you are runniong a vtec sel with no pressure unit?single wire vtak
my car is a 91 crx with obd 1 jumper harness.p72 ecu with p28 base map n/a, crome pro
can i just ground that wire or what else could i do?

thanks...

much appreciation

Title: Re: vtec press selinoid.....
Post by: CSaddict on July 22, 2009, 07:48:20 PM

Its in crome pro. Disable and ground signal wire.

Title: Re: vtec press selinoid.....
Post by: JACER63 on July 22, 2009, 07:57:22 PM

yeah i saw it in crome gold, but not in crome pro ... need to burn a chip in this car.so  all i do is disable and then ground the signal wire coming from the harness right which is a gray wire on mine?  thanks csaddict

Title: Re: vtec press selinoid.....
Post by: lilpooh21186 on July 22, 2009, 08:14:25 PM

yep or you can tap the signal wire with your vtec wire but best way is to disable and ground

Title: Re: vtec press selinoid.....
Post by: JACER63 on July 22, 2009, 08:17:17 PM

ok ill try this thanks guys for your help... :)

Title: Re: vtec press selinoid.....
Post by: BangBusMaster on July 23, 2009, 12:49:30 AM

A4 T'd to D6.

Title: Re: vtec press selinoid.....
Post by: JACER63 on July 25, 2009, 11:38:38 AM

Quote from: lilpooh21186 on July 22, 2009, 08:14:25 PM

yep or you can tap the signal wire with your vtec wire but best way is to disable and ground

thanks for all your help guys.. got it to work with no more cels..woo hoo

Title: Re: vtec press selinoid.....
Post by: 88dx on July 25, 2009, 02:25:35 PM

Quote from: BangBusMaster on July 23, 2009, 12:49:30 AM

A4 T'd to D6.

Did you call Josh? haha