:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: buk9tp on July 25, 2009, 02:58:59 AM

Title: 1984 celica rear diff bearings removal
Post by: buk9tp on July 25, 2009, 02:58:59 AM

http://forums.celicasupra.com/showthread.php?t=46681 (http://forums.celicasupra.com/showthread.php?t=46681)

how do i get part number 41301a off the diff?

its 2 bearings on both sides..

tried cutting a beer can and weding between the bearings and plate but no luck

also tried magnet

dont have the proper tools so need to nigger rig it

Title: Re: 1984 celica rear diff bearings removal
Post by: buk9tp on July 25, 2009, 03:01:01 AM

bearing puller hmmm internet stopped being gay and i looked it up will check tomorrow

unless someone can think of a way to nigger rig it

Title: Re: 1984 celica rear diff bearings removal
Post by: Conceptz-X on July 25, 2009, 09:15:31 AM

A bearing splitter is usually the tool of choice, if not break/cut the outer race, take your cut off wheel and cut the inner race as much as you can without getting the carrier, then take a chisel and split the inner race, should slide right off.

Title: Re: 1984 celica rear diff bearings removal
Post by: crttaz on July 25, 2009, 10:03:00 AM

Harbor Freight Lsrge Bearing splitter, $20

Title: Re: 1984 celica rear diff bearings removal
Post by: E-b0la on July 25, 2009, 01:19:08 PM

just get the proper tool, a puller or splitter.

Title: Re: 1984 celica rear diff bearings removal
Post by: buk9tp on July 25, 2009, 11:51:37 PM

lmao ended up going to the local bumfuck autozone and they suprisingly carriedthe bearings and only had 3 instock  O0