:::RHMT::: Real Home Made Turbo
General Category => Forced Induction => Topic started by: ifly87 on August 22, 2009, 01:59:29 AM
-
I just put on a skank2 mani and bigger tb, I am using that cheap ass pre-bent ebay charge piping.
The shit is so gay it sends the hot side between the transmission and the radiator so you have to wrap you're lower coolant line around it. I would like to find a place that I can purchase charge piping even if I have to weld it up myself I have access to a tig, I dont care. I cant seem to find any kits and the ones on ebay either try and route it all retarted or dont have the right bends. I've surfed the web and cant really seem to find anything decent.
Where do you buy you're aluminum bends? even if its steel I guess but I just need to know where to get the shit.
-
Seriously. Mother fucking google bitch. This is HOME MADE!!!! Find some shit, weld it together. Mother fucker on here made charge piping out of brake clean cans.
-
pvc pipe
+ JB weld :noel:
-
the sponsor in the for sale section has great prices on tubing.
http://www.mandrel-bends.com/catalog/builder-kits-33/pro-builder-kits-46/2-5-od-x-3-75-radius-mild-pro-builder-kit-179.html (http://www.mandrel-bends.com/catalog/builder-kits-33/pro-builder-kits-46/2-5-od-x-3-75-radius-mild-pro-builder-kit-179.html)
they have all different kinds of builder kits. get to it.
-
You're a fag for not using a PBT intake manifold and TB. You get no advice from me what-so-ever!!!!!
-
Seriously. Mother fucking google bitch. This is HOME MADE!!!! Find some shit, weld it together. Mother fucker on here made charge piping out of brake clean cans.
I've been there done that, maybe when I was in HS I now want somthing that's going to hold up around the block.
You're a fag for not using a PBT intake manifold and TB. You get no advice from me what-so-ever!!!!!
what the fuck is pbt? I've never even heard of their intake manifolds, is that the ones chis sells? if so then thats the throttle body i'm using.
the sponsor in the for sale section has great prices on tubing.
http://www.mandrel-bends.com/catalog/builder-kits-33/pro-builder-kits-46/2-5-od-x-3-75-radius-mild-pro-builder-kit-179.html (http://www.mandrel-bends.com/catalog/builder-kits-33/pro-builder-kits-46/2-5-od-x-3-75-radius-mild-pro-builder-kit-179.html)
they have all different kinds of builder kits. get to it.
Nice I guess thats what I was looking for.
-
A normal civic/teg will need at least seven 90* bends, so you'd be at $114 for a super kit - half that for steel. Some people can't weld the thin section on the outter radius of a 180*, keep that in mind if you (or your weldor) suck. If you don't mind welding, you can cut costs with pie-cuts. A 12" section can get you 180* worth with decent flow and a tight radius, which can be far cheaper.