:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: blackoutmp5 on September 03, 2009, 05:31:58 PM
-
I've been on old hmt for about 5 years, my name was turborolla94, b/c back in the day thats what my project was going to be..but i didn't even have my permit then :-[ I never posted much, just lurked and read up on everything i could. I'm 19 now, and i think I've read enough to start my build. I'm currently building a hmt kit for my protege5, and no, its not like brianmp5t's car..lets just leave that subject alone.
I've been working with my dad at his machine shop for about 4 years, and I've learned a lot of shit from my old man. here's some pics of where I work and the equipment..
the shop
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090903-144558.jpg&hash=ff84a417df38be71706fa6b6e8c429be5257ee5c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090903-144610.jpg&hash=efc72e709e83613d3da0c44e17ee6a10cfc80229)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F20090703131127.jpg&hash=8b398fe4a3fa145316809ee19ccfcfdff1cd8518)
homemade anodizing kit off of craigslist..300 bucks :yes:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090903-144659.jpg&hash=1bab5211aa26e74465613c7459e3e749a7dfd53e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090903-144628.jpg&hash=0b5c7c3aaf90db237fe476df4d9e9852fd63754f)
and the welders
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090903-144515.jpg&hash=1a379a6f1fd6d0572186b081459f1f3bd3bc62b1)
and my favorite..its from the 70's or 80's..high frequency :-*
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090903-144528.jpg&hash=9fdd46af3badb123409112712c8de7f7e2c78ee4)
here's a shitty pic of my tig welding on stainless
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F20090622091648.jpg&hash=4022f19e76b71329446b8be320c850aece0e84ee)
and here are some of the parts that I've made..we mostly do work for textile companies like WIX and A&E..and the white plastic pieces tear the feathers off of chickens ;D
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F20090702151025.jpg&hash=20ef811a09bc4e4567f91cdcf2a94d07cd70e88c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F20090703131001.jpg&hash=a428950454677eaa1e379dfbc55b9b4803b29552)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F20090622150145.jpg&hash=63b5bd1cd19ca00225b7c18963fb688baf925940)
And now for the ride..now don't make fun of it..I'm not afraid to admit that the shit is slow..and even with a turbo kit..its still going to be slow. I dont really care because I'm not building the kit for speed or hp, its just for personal satisfaction to say that I built my own turbo kit. I'm aiming for about 180 hp, just to start out so i know my engine won't blow up. My buddy backed into the front of it, hence the bent hood and cracked grill..and bumper.
*edit* the red shit in the engine bay came with the car..that was not my doing
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090903-144822.jpg&hash=3b136caa8af6ce4a721fe4e8f07a62a34f5b6f14)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090903-140605.jpg&hash=e3da6285ee86a6be08ac03a0a3ef91fb62d6e594)
I built my own exhaust using 2.5" stainless pipe..and a resonator..no muffler :) it actually sounds very good..its loud when i want it and quiet when it needs to be..overall im happy with it. It cost me about 150 bucks.
whitey bends :-*
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090815-021627.jpg&hash=39852065d1e7a89cfe3c688feb90ddaea6779882)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090903-140623.jpg&hash=bdd3b68a292dd30734422b01d31a824da01a17e4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090815-023251.jpg&hash=99663c66602a7ffefcf2f170521db54e7074b25e)
being painted..
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090819-191223.jpg&hash=b6e43327e335a6c4c5830698efcac89f592b6e11)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090903-144458.jpg&hash=4eb9873145f394c1283d8272b119b5078d0a2321)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F090903-144442.jpg&hash=0143f169561a0b718e5baf64a5254f69346efc1a)
I have about 90% of the parts collected for the turbo kit..heres the turbo that I'll be using..its an ihi ball bearing turbo with subi flanges..its about the equivalent of a mitsubishi 16g turbo..and i would go bigger but i got it for 100 bucks and i couldn't pass it up. It's a replacement for a t25, if you haven't noticed by the compressor side of the turbo. It will spool up quick..which isn't what i want, but its a start. hopefully I'll be building the engine and getting a t3/60-1 or something around that..but thats all in the air for a couple years. The intercooler is a trust intercooler off of an eclipse..1200 msrp..40 dollars :) it was wrecked and had some holes..but i got those welded up and it holds pressure fine. It's fucking huge..and i dont know if i'll be using it or not. Hopefully in the next month or so I'll be posting up a build thread..but this will do for now.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi85.photobucket.com%2Falbums%2Fk79%2Fbennettman123%2Fcar%2520and%2520shop%2F20090525202127.jpg&hash=63986d24d62e844eb9d217d81f6e6d338f2701b5)
enjoy
-
No painted dash,BOOOOOOOOOOOOOOOOOOOOOOOOOOOO
-
Wow dude I would kill people to have access to the equipment you do. Good luck and keep us posted.
PS post up some titties or I will fist your mother's poo cutter :-*
-
you're missing the most important part of your intro post...
:-\
-
looks like you have all the tools you need to do this. Now get to work already and get it done.
-
for you nig-nogs..enjoy
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi635.photobucket.com%2Falbums%2Fuu74%2Fheyarnold1425%2F1240293619512.jpg&hash=c3d8de3e4280fbc938ca89da2a41aa9fbd59777f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi635.photobucket.com%2Falbums%2Fuu74%2Fheyarnold1425%2F1240461609431.jpg&hash=1ca3cf77fe7c279f6bda79d08c41a18a4a3f74fc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi635.photobucket.com%2Falbums%2Fuu74%2Fheyarnold1425%2F1240643665788.jpg&hash=2e616d4cd7c01d5c97bf16052254cd20cf716bb1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi635.photobucket.com%2Falbums%2Fuu74%2Fheyarnold1425%2F1241159448680.jpg&hash=df3362087ed259c342a6e867249927361f89208b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi635.photobucket.com%2Falbums%2Fuu74%2Fheyarnold1425%2Fass.jpg&hash=fba3533fe0a65d36b95fb9b53bf30a9cd3b865a8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi635.photobucket.com%2Falbums%2Fuu74%2Fheyarnold1425%2Fass7.jpg&hash=310801917a4083d4a35a7ff819230cf5d1f66d0d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi635.photobucket.com%2Falbums%2Fuu74%2Fheyarnold1425%2Fhot.jpg&hash=dd267897f1bb9c6a47f5d7ba3b66b8da9fc0c353)
-
WELL DONE! Finally a noob that gets it right. :noel:
-
I remember you from ohmt. Good noob post.
Like Chris said, murder for your shop. I could do some serious damage with equipment like that at my disposal.
-
and HMT kits blow This is RHMT mutherfuckker
-
One thing to point out, if you leave the porn hosted on photobucket it is going to disappear shortly.
-
HURCO! haha we have and old vertical HURCO at the community college near me.
How do you guys like those JET mills? We have a JET lathe at my college, never really used it but I've heard they're supposed to be a pretty nice machine.
-
nice thread hope to see more of your car and good save btw O0
-
One thing to point out, if you leave the porn hosted on photobucket it is going to disappear shortly.
I honestly don't know any other hosting sites..so i guess you better save the pics while you can O0
∞ x better than MP5T.
How much for you to make a set of rods for me out of 4340? :yes:
haha we mostly do textile stuff..i dont know if I'm up for the challenge for rods. I'm only working part time now that I'm back at school so I dont know if I could do that for you..sorry bud.
-
HURCO! haha we have and old vertical HURCO at the community college near me.
How do you guys like those JET mills? We have a JET lathe at my college, never really used it but I've heard they're supposed to be a pretty nice machine.
the hurco is a beast..its a 3-axis, but it can do some crazy shit..as for the jet mills, my dad has had those for probably 10 years now, they run like a champ.
-
anyone that remembers whitey bends on a re-intro post is just swell in my book :noel:
-
NOW its a good intro post :yes:
-
If you produce fail with such equipment on hand, expect to recieve hell !!!
-
If you produce fail with such equipment on hand, expect to recieve hell !!!
I'll try not to, but since my car is the only transportation to and from work, I have to make sure i have absolutely everything before i start on it..so it might be a month or two..but it will get done. I've blown all of my money i made this summer on parts..so its going to happen lol
-
I think the fact that he does it himself instead of getting someone else to do it , works in his old mans shop and posts quality womens is a win over and over..
Where the fuck did the porn go... I want lexi belle back
-
Nice. I like the fact that you know how to do machine work. The porn could be better... I like to see nekked womens not clothed ones... The other pics arent working. Make sure you remove all that red shit in your engine bay...