:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: Evan on September 06, 2009, 11:35:31 PM
-
so a couple weeks ago i decided to pull the 307 and rebuild it to give it some ok power. I have all the parts already and have completly blown my 1000 dollar budget out of the water.
Parts im using
Comp cams 262 with matching head hardware.
305 4 barrel heads. 1.84 intake 1.5 exhaust. Edelbrock torker.(i had a performer but it was too chewed up to use. so i am temporarily using the torker) holley 600 Hei alittle chrome all that good shit.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2Fmotorpull-1.jpg&hash=c57337fc468ba66ad911ed7a5fb4fac0554a620c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2Fmotorpul-1.jpg&hash=13218ffe3fa00a6fda725cb68e828c34acc6ae41)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2Fnovapul-1.jpg&hash=faf3a25236eb54fbb922295beca0288e36e070be)
once i got it stripped down i found out its been recently rebuilt(score) then i cleaned it and painted it midnight black
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2F0831091636-00.jpg&hash=9d595cf67de73da02a3e22bf0e5905b4577f0de1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2F0831091525-00.jpg&hash=b57674457cd3fd0f6029f83ec44351560c39da04)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2F0831091525-05.jpg&hash=838b38d133781aff13412cc3e3f938846d47ecce)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2F0831091526-01.jpg&hash=d9df57638cdcd4f68c7b1778c751681e0eac24cc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2F0831091635-00.jpg&hash=05184efa94055caf10d9c606e00c829972e2478c)
after alittle cleaning i noticed a stamping on the pistons
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2F20090901171932.jpg&hash=a89ee32d6f173c6cffc5c134b1bb3b81d8906155)
more good news for me:)
jump forward a couple days and this is where im at right now.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2F0904091536-00.jpg&hash=420dccc0c8ccdb28040abdac898a4fdbc2271c22)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2F0904091536-01.jpg&hash=f0c3aed5e1ee85a66030b47c594e2a7a8272f6c0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2F0904091536-04.jpg&hash=0247bd2b2fbe030699398ea698d9f86fa6763c2d)
-
Where's the boost!
-
you left your sifter on the carb
-
If I ever find your car I'm peeing in your carb funnel.
-
Chrome tin valve covers = chrome thermostat housing = leakcity
-
If I ever find your car I'm peeing in your carb funnel.
My father has the same, it looks funny :)
-
If I ever find your car I'm peeing in your carb funnel.
My father has the same, it looks funny :)
Pee in his carb funnel? ???
-
Chrome tin valve covers = chrome thermostat housing = leakcity
DOnt forget to get the chrome timing chain cover too!
-
If I ever find your car I'm peeing in your carb funnel.
My father has the same, it looks funny :)
Pee in his carb funnel? ???
No, only carb funnel. Without pee. I'll post pics of his car this weekend. I can't wait to see this damn car on the road...
He has this engine into it
V8 Cavalier Burnout (http://www.youtube.com/watch?v=RtT4YSxoNwQ#ws-normal)
Sorry for thread jack :-X
-
Where the fucks the turbo/porn?
-
yeah... n/a WTF?
-
Can we move this thread again? It clearly doesn't belong in Tech.
-
You sir have resurrected some shit to live another day at quite a price...
I'm with Joey, Pissing in your funnel
-
makes me sad i dont ever get my nova out...
maybe next year, i miss the race gas 650+ hp slut... and the total lack of traction from the tiny 14s...
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi302.photobucket.com%2Falbums%2Fnn93%2Fhot_rod_lincoln_8%2FDSCN0720.jpg&hash=bdef0e9e777e75f35e45d2d6ca118bd67b2a600b)
-
Where's the boost!
-
Why are you sinking money into a 307?
Cool none the less, but I would pull the crank and rods and stuff them into a 350 block with new pistons.
-
Where's the boost???
-
Where's the boost???
if you had to build a N/A, it should have been badass. Instead you went against the recomendations of the community and embarassed yourself
-
I want a Nova :(
-
I thought when i joined up the other day that this said real homemade turbo. Not i want to be a V8 faggot.. My K swapped hatch would eat this piece of shit anyday of the week.. what a fucking tool :noel:
piss off faggot
-
I thought when i joined up the other day that this said real homemade turbo. Not i want to be a V8 faggot.. My K swapped hatch would eat this piece of shit anyday of the week.. what a fucking tool :noel:
says the guy on a broke dick website with no intro post and a "k series" motor....weaksauce
i'll beat up your mothers vulva, shut the fuck up dickcheese
-
i dont need an intro when my k swap cost more than your whole fucking car.. Ask you mom if her throat is still sore from swallowing this 10" dick.. you fucking poser
blah blah blah, i have money, yet i'm surfing the brokest site on the web. har har har. my mom said deep throating you was like swallowing a pack of tic tacs
-
Why are you sinking money into a 307?
Cool none the less, but I would pull the crank and rods and stuff them into a 350 block with new pistons.
why not? its the same as any other sbc. I could of spent 500 on a old stock 350 i knew nothing about and gone from there. if i did that i wouldnt have a finished short block yet.
You sir have resurrected some shit to live another day at quite a price...
I'm with Joey, Pissing in your funnel
940 bucks...ehh not a whole lot.+ i can put most of this stuff on another sbc should i choose so.Chrome tin valve covers = chrome thermostat housing = leakcity
Not really. that housing have a rubber o ring to stop from leaks and i know how to actually put on a gasket
If I ever find your car I'm peeing in your carb funnel.
I took it off. My co workers are all hotrodders ( i work at a hot rod shop) and they put it on.
and to the faggot with a k swap motor. Though i may be N/A there is no site rules as to how many cylinders you can and cannot have. get your ricer ass ego out of here.
-
if you had to build a N/A, it should have been badass. Instead you went against the recomendations of the community and embarassed yourself
It's only embarrassing if you give a shit :noel:
-
why not? its the same as any other sbc. I could of spent 500 on a old stock 350 i knew nothing about and gone from there. if i did that i wouldnt have a finished short block yet.
Not all SBCs are created equal.
307 blocks historically have soft cylinder walls. I wasn't saying you should build a 350 like every other jackass, rather, build a large journal 327 for dirt cheap is all.
307 crank plus 350 block = 327.
-
if you had to build a N/A, it should have been badass. Instead you went against the recomendations of the community and embarassed yourself
It's only embarrassing if you give a shit :noel:
I'll give you a shit - down your carb funnel.
-
why not? its the same as any other sbc. I could of spent 500 on a old stock 350 i knew nothing about and gone from there. if i did that i wouldnt have a finished short block yet.
Not all SBCs are created equal.
307 blocks historically have soft cylinder walls. I wasn't saying you should build a 350 like every other jackass, rather, build a large journal 327 for dirt cheap is all.
307 crank plus 350 block = 327.
thats a urban legend. there nickel content is about the same as any other other sbc. some even had higher nickel content.
and I plan on doing another build soon. this was just a cheap crap set up to give some nice street able power and enough to shut down some of the cars at my high-school
-
Ah, good deal then.
:noel:
-
If you knew anything about how to do gaskets you wouldn't put a rubber gasket on stamped tin dead fucking smooth chrome plated valve covers. Fail, sorry. Your shit will leak, there is no doubt.
-
If you knew anything about how to do gaskets you wouldn't put a rubber gasket on stamped tin dead fucking smooth chrome plated valve covers. Fail, sorry. Your shit will leak, there is no doubt.
Like cork would be any better.
ROFL.
-
If you knew anything about how to do gaskets you wouldn't put a rubber gasket on stamped tin dead fucking smooth chrome plated valve covers. Fail, sorry. Your shit will leak, there is no doubt.
I was talking about my thermostat housing.
and i put permatex on my gaskets when i put them on.
For the valve covers i do the tops only because yes your right thats where they typically mostly leak..
don't worry. I got my shit down :noel:
-
don't worry. I got my shit down :noel:
I call bullshit, post pics of your turbo setup for the car.
-
don't worry. I got my shit down :noel:
I call bullshit, post pics of your turbo setup for the car.
I cant show that right now. Its under wraps. I will tell you however it consists of spit,grit,and a hellova lot of duct tape! :yes:
as for the motor. Its back in the car. should have her running shortly
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2F0926091729-03.jpg&hash=3dc7c9d203b37ad524fcd9b9740270fd197687e1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi11.photobucket.com%2Falbums%2Fa194%2Fzeroxcool23%2F20090926173219.jpg&hash=958d17ed6feb1693b21e3a3836bdeec287cdf667)
-
You can change the intake all you want but I can still pee into your carb.
-
You can change the intake all you want but I can still pee into your carb.
I know. I just made it more of an inconvenience to you :yes: