:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: reddevil on September 17, 2009, 09:22:03 PM
-
Who is showing up?
Racing?
Spectating?
I hope to bracket race, all goes well with my tuning next week.
-
I thought about going to sure yet, mabey if i can find some people to car pool down with.
-
na, My boat doesn't do so well on the pavement.
-
na, My boat doesn't do so well on the pavement.
what a shitty boat :mexi:
-
Ill be there
-
Can't leave the state. :-\
-
Ill be there
Look me up, I will be in the two-tone POS looking Legacy. :)
-
Ill be with an all motor drag car
-
Can't leave the state. :-\
they wont know, woodburn is like 20mins from WA
-
a few friends are going, not too sure if im going yet though
-
Im full of shit
Yes you are :mexi:
-
Ill be in the parking lot
-
Can't leave the state. :-\
they wont know, woodburn is like 20mins from WA
We'll see. I might have to work that day anyways.
-
will be there with the integra
-
will be there with the integra
is that your 788whp teg on rrevs site? I thought you had a type R?
-
will be there with the integra
is that your 788whp teg on rrevs site? I thought you had a type R?
Yes it is. I did have an itr. Actually the build that is in the silver teg was started when i had the itr. It was actually suppose to be for the itr. But buying a house was more important so i sold the itr but kept all the motor and turbo stuff.
Long story short the car has gone 10.4 @ 138 off the gates the first time out. Well since then have had nothing but problems with machine work dealing with the head. I have had the head off the car 6 times now becuase of machine shop fuck ups. Just put it back together last night and going to the track again tomorrow to do some low boost.
-
We will be there for sure! We are busting tail trying to get all these cars ready - looks like we'll be bringing 8-10 cars down.
That sucks man about your cylinder head issues, I feel for you. That type of thing can be so frustrating.
I really hope you've got it all squared away this time, and hope things work out well so you can get some good runs in.
-
i'll be there
In 2002
-
I'll be there if i don't forget
-
We will be there for sure! We are busting tail trying to get all these cars ready - looks like we'll be bringing 8-10 cars down.
That sucks man about your cylinder head issues, I feel for you. That type of thing can be so frustrating.
I really hope you've got it all squared away this time, and hope things work out well so you can get some good runs in.
Thanks man. You guys gonna be there saturday? I think we have finally got everything worked out with the head haha. Went to Pir with the boost controller off and went 10.80@136.6 and 10.82@137. Previous best at pir before with the endyn head without boost controller was 10.86@136 so who knows. See you guys next week.
-
I decided to go watch the Giants blow going to the playoffs next weekend
-
Thanks man. You guys gonna be there saturday? I think we have finally got everything worked out with the head haha. Went to Pir with the boost controller off and went 10.80@136.6 and 10.82@137. Previous best at pir before with the endyn head without boost controller was 10.86@136 so who knows. See you guys next week.
Yeah, we'll be there Saturday, actually plan on coming down Friday. Glad to hear the you've got things fixed. I think you sent the head gremlins my way though! :P
We are trying to get another vitara motor together for me to run, and are running into some retarded issues with the head that I just had ported as well! Sooo gay. Not to mention my replacement IM isn't showing up until thursday.
-
Thanks man. You guys gonna be there saturday? I think we have finally got everything worked out with the head haha. Went to Pir with the boost controller off and went 10.80@136.6 and 10.82@137. Previous best at pir before with the endyn head without boost controller was 10.86@136 so who knows. See you guys next week.
Yeah, we'll be there Saturday, actually plan on coming down Friday. Glad to hear the you've got things fixed. I think you sent the head gremlins my way though! :P
We are trying to get another vitara motor together for me to run, and are running into some retarded issues with the head that I just had ported as well! Sooo gay. Not to mention my replacement IM isn't showing up until thursday.
That sucks man. Sorry to hear especially after what happend with the shop getting broken into. That sucks. on another note my temp NHRA license came yesterday and i just went and weighed the car it was 2500 on the dot with me in it and half tank of gas. Hope you guys get everything done so you can run. see you guys down there.
-
Ill be with an all motor drag car
you should make a quick run up to everett and grab the front end you need
-
i guess me and a friend are heading up saturday night and staying in a hotel. anybody know any place in the woodburn area to play pool and drink beer and possibly a few ladys?
-
craigslist. lol
-
craigslist. lol
fucking fabi and selly brought some CL hooker to my house one night, wasnt cute at all
-
craigslist. lol
fucking fabi and selly brought some CL hooker to my house one night, wasnt cute at all
Thats fucking hilarious!!!
-
craigslist. lol
fucking fabi and selly brought some CL hooker to my house one night, wasnt cute at all
I bet you still beat though. lol
-
lol, no but i did let her strip
-
See you fucks tomorrow! I drive the two-tone legacy wagon, say hi.
-
Hi
-
Made it.
Raced.
Was fairly happy.
Then drove north and lost a piston 2 miles out of Woodburn. The suck.
-
here is an in car of my 10.43@146 pass.
Rrev Motorsports (http://www.youtube.com/watch?v=5bSjyt2RnsQ#normal)
-
FUCKING WOW!!! :o
Flat out moving!!
-
FUCKING WOW!!! :o
Flat out moving!!
Thanks. I am actually going out to the garage to work on the car some more. I finally had enough time in the car to somewhat get some data to figure stuff out. This was the first time i have been able to drive the car more than 3 or 4 times without having to pull it apart and yell at the machine shops.
-
Is that a 3rd gen teg? Your user name would suggest otherwise... but the dash looks familiar.
Nice race, btw... looks like a fun car ;D
-
Is that a 3rd gen teg? Your user name would suggest otherwise... but the dash looks familiar.
Nice race, btw... looks like a fun car ;D
yea its a 96 ls. tipped the scales at 2535 with just above half tank of gas.
-
Sweet
-
here is an in car of my 10.43@146 pass.
Rrev Motorsports (http://www.youtube.com/watch?v=5bSjyt2RnsQ#normal)
What is your setup in that beast?
-
GE sleeved b17a block with crower rods and cp pistons. 9.5.1. b16a head with standard sized supertech valves, springs and retainers. stock ports. full race divided topmount with with a garret 4294r. stock gsr trans with itr lsd. still working some shit out with it will be back at the track in shortly.
-
GE sleeved b17a block with crower rods and cp pistons. 9.5.1. b16a head with standard sized supertech valves, springs and retainers. stock ports. full race divided topmount with with a garret 4294r. stock gsr trans with itr lsd. still working some shit out with it will be back at the track in shortly.
that fucker does really move. losing traction in 5th. thats good