:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: shadow on September 24, 2009, 03:56:29 PM

Title: ID these
Post by: shadow on September 24, 2009, 03:56:29 PM

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg185.imageshack.us%2Fimg185%2F369%2Fimgp2931.jpg&hash=7aa7697fbca781a95fe6e81e3120e475b36ef97a)
ok wtf, goes in that hole, i mean, something bolts in there, but what?


and any clue as to where this washer goes? lol, i found it under the car, near where i left the bolts for the axles, but i dont recall taking it off?

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg19.imageshack.us%2Fimg19%2F9343%2Fimgp2934w.jpg&hash=a42435e36d5269a5294a3210a08304f2bbf1d140)

Title: Re: ID these
Post by: turbob16hatch on September 24, 2009, 04:16:02 PM

only thing i can think of for that bolt hole is maybe it's used for the auto transmissions. idk.

Title: Re: ID these
Post by: shadow on September 24, 2009, 04:42:41 PM

the rear mount goes into the whole right under the circled one. any clues as to the big ass washer?

Title: Re: ID these
Post by: 89hatchsir on September 24, 2009, 05:32:39 PM

The big washer looks like the one that goes on the backside of the shift linkage. Where the bushing end bolts onto the tranny.

Title: Re: ID these
Post by: shadow on September 24, 2009, 05:46:53 PM

Quote from: 89hatchsir on September 24, 2009, 05:32:39 PM

The big washer looks like the one that goes on the backside of the shift linkage. Where the bushing end bolts onto the tranny.

you sir kick ass

Title: Re: ID these
Post by: AbaZ on September 25, 2009, 12:46:37 PM

Quote from: shadow on September 24, 2009, 04:42:41 PM

the rear mount goes into the whole right under the circled one. any clues as to the big ass washer?

I beleive there is 2 bolts for the rear mount (maybe 3?), The one that is circled I think is a 19mm head bolt that goes through the trans correct?

washer looks like shift linkage

Title: Re: ID these
Post by: shadow on September 25, 2009, 01:23:58 PM

nah, that hole doesnt go all the way through.

the one below it does, and its 17mm, i think. the other two for the tranny are 19mm but they are way lower

Title: Re: ID these
Post by: turbob16hatch on September 25, 2009, 06:59:17 PM

is this b series or d series?

Title: Re: ID these
Post by: biscuit on September 25, 2009, 09:56:20 PM

How much for the Chucke Cheese ruler. ;D

Are you sure that hole doesn't go all the way through?  Looks like its for the rear transmission mount.

Title: Re: ID these
Post by: shadow on September 25, 2009, 10:03:01 PM

not for sale! lol. thats my bad ass ruler.

yep, hole doesnt go all the way through. engine is back in, and the lower hole is for the mount.

and the big ass washer was the the shift linkage