:::RHMT::: Real Home Made Turbo
General Category => Hybrid/Tech => Topic started by: shadow on September 25, 2009, 09:33:41 PM
-
lol.after all this its kinda funny.
ok, so i have about 40psi fuel pressure. im about the check for spark. the dizzy went in just fine, i did move the rotor dealie on the dizzy that goes into the cam so that the lines on it were all on the same side. fucking aye.
anything else i should check for other than spark? :'(
-
lol.after all this its kinda funny.
ok, so i have about 40psi fuel pressure. im about the check for spark. the dizzy went in just fine, i did move the rotor dealie on the dizzy that goes into the cam so that the lines on it were all on the same side. fucking aye.
anything else i should check for other than spark? :'(
Uh, mechanical timing??? Just a theory.
-
timing is right, at least according to me. oil pump gear matched the mark, crank pulley matched its mark, and cam gears matched pointing up as well as the matching notches.
-
1342 firing order check it
-
firing order is in check.
on the other hand its not firing. i has no spark. that was easier than i thought. ideas on that?
ill get to it tomorrow morning.
-
thermostat housing ground? but before that make sure the distributor is plugged in
-
call another meet...... and shave your dog this time.
check the fuses. and grounds. and connectors that go to the dist.
-
lol. damn dog hair is still everywhere.
-
crapped out dizzy. put on a spare i had, and she went on, for a glorious 2 seconds. i turned it off, bc my douchewaffle neighbor is blasting music, and i cant hear a damn thing.
-
its alive! lol. whoooo. i need to redo valves, as i hear them :-\
-
my douchewaffle neighbor is blasting music, and i cant hear a damn thing.
would that be those retro hits from the 80's?
-
lmfao. you know it. damn chilango.
-
;D
-
you put the pistons back in.