:::RHMT::: Real Home Made Turbo

General Category => Fabrication => Topic started by: weirtech on October 02, 2009, 09:49:36 PM

Title: b20a5 prelude, one of the cleanest i've seen
Post by: weirtech on October 02, 2009, 09:49:36 PM

i did this manifold a couple years ago (ceramic coated now) when the engine bay was quite a mess.  the customer came back this week for the 3" downpipe and some revised charge piping since he'd gotten a new bov and relocated the battery and fuse box.  i think it looks pretty tite.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.photobucket.com%2Falbums%2Ff161%2Fweirtech%2FFab%2520for%2520Hondas%2FDSC00821.jpg&hash=b5b702c029d37718efb221f4a5bb2aff95607089)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.photobucket.com%2Falbums%2Ff161%2Fweirtech%2FFab%2520for%2520Hondas%2FDSC00822.jpg&hash=a4cf0199d9e78fd00d32b840f51e132f541d9082)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.photobucket.com%2Falbums%2Ff161%2Fweirtech%2FFab%2520for%2520Hondas%2FDSC00823.jpg&hash=c998fe4d59691088948644c749076d937d07f7e2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.photobucket.com%2Falbums%2Ff161%2Fweirtech%2FFab%2520for%2520Hondas%2FDSC00824.jpg&hash=845b662f91729f0d8dc84381f3660374d407934a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.photobucket.com%2Falbums%2Ff161%2Fweirtech%2FFab%2520for%2520Hondas%2FDSC00825.jpg&hash=8112c97a0a39f24125f990e5b3a914ce5f6c9ed7)

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: bigdaddyvtec on October 02, 2009, 09:53:58 PM

How many HGs has he gone through with the b20 failure???

LL... Those motors suck balls

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: ratcityrex on October 02, 2009, 09:54:31 PM

Im digging the b20 setup

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: weirtech on October 02, 2009, 10:03:37 PM

Quote from: bigdaddyvtec on October 02, 2009, 09:53:58 PM

How many HGs has he gone through with the b20 failure???

LL... Those motors suck balls

yeah, i don't know too much about them.  he's had it fully built by a local engine builder here.

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: Phate on October 02, 2009, 10:42:46 PM

If I wasn't aware of how much fail exists under the hood, I'd own one of those.  I love the body style.

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: deeznutts on October 02, 2009, 11:27:13 PM

i cant say i have ever seen someone build a b20a5 seen plenty blow up hahah does look clean got any car pics

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: HiProfile on October 03, 2009, 02:03:37 AM

Just read an ancient post about a b18 using a deckplate, sleeves, and a 95mm b20 crank for 2.2L madness. Seems that's the best use for that engine...

Regardless, you didn't make that, just the turbo kit. Looks very nice, but I'll still flame you for not doing what would have been an easy divided setup for a HX-40. Lame :P

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: 90turboteg on October 03, 2009, 12:57:36 PM

a local here had a super clean while one with a h22 swap, seems a little smarter to me... it had dohc vtec stickers on it and i laughed until he poped the hood. now he wants to boost it...

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: Joseph Davis on October 04, 2009, 02:55:32 PM

I love seeing old fab (mixed with new or not) that's held the test of time.


*cough* IM flanges *cough*

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: bigdaddyvtec on October 04, 2009, 07:30:23 PM

flat black on here has a 3rd gen made 604 WHP on a LEed tune on pump 92 and meth...  35R built h22... Sad t hing is now hteres a hole in the front of the block JUSSSSSST about the size of a coinnecting rod...



Shitty.


Car is no joke, hes beat me a couple times on full tilt.


Car is soooooo clean

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: CSaddict on October 05, 2009, 05:51:30 AM

Pics no longer work.

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: chris on October 05, 2009, 06:11:13 AM

Crower us to use the prelude b20 crank in their stroker kits way back in the dayz

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: weirtech on October 05, 2009, 08:04:40 AM

i'm over my bandwidth.  fucking photobucket wants $25/year to host pics.  they can suck my big white ass.

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: chris on October 05, 2009, 11:44:46 PM

use imageshack I stuff from years ago still up

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: flat_black on October 26, 2009, 02:44:25 PM

ahh the memories that i had with that engine... Fuck that POS motor

Title: Re: b20a5 prelude, one of the cleanest i've seen
Post by: bigdaddyvtec on October 26, 2009, 05:10:43 PM

lol