:::RHMT::: Real Home Made Turbo
General Category => Hybrid/Tech => Topic started by: notfastcrx on October 15, 2009, 12:50:11 AM
-
here's the deal; I bought a bone stock 97 DX a few months ago. 167k on the odometer as of today. it burns oil like a mother fucker (4 quarts in less than 1000 miles)
I'm hoping the rings are decent and its a leaky valve seal(s).
so my question is... do most of the d15/d16 heads fit on the d15 block? or do any of you jigs have any spare cylinder heads laying around that will help my cause. im willing to spend a couple hundred on it to get it so i'm not going through 4 quarts of oil every month.
while ur figuring out an answer to my dilema, here's some nsfw sheet.
http://www.tube8.com/teen/sandy-sweet/5656/ (http://www.tube8.com/teen/sandy-sweet/5656/)
http://www.tube8.com/hardcore/sandy-sweet-down-the-hatch-scene-/126367/ (http://www.tube8.com/hardcore/sandy-sweet-down-the-hatch-scene-/126367/)
-
that motor is fucked if it goes threw 4qts in 1000miles.
-
welcome to the failure of the y series motor. I promise the mains are all ready to eat shit and you have major scoring in the cylinder walls. Rod knock should be coming anytime.
Go find a used obd1 block and throw it in.
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg390.imageshack.us%2Fimg390%2F3267%2Ffffuuuuuuuu.jpg&hash=2911c0a7748a7caf3517530460570ad35437abcf)
-
Your lucky to have that block lasting that long
I started replacing bearing failed y series blocks 7+years ago
-
anyone want a 97 civic dx that slightly burns oil????? $1800 come get it
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fc3.ac-images.myspacecdn.com%2Fimages02%2F106%2Fl_59528446bfba49cb88955b3815658552.jpg&hash=3c71f182e953b0e222953e5f07297a7afcb7fe42)
-
Seriously find a lower mileage d16z6 convert to obd1 and you have a great car
-
ok thanks, i'll see what i can find. if anyone has any dseries' laying around let me know
-
that motor is fucked if it goes threw 4qts in 1000miles.
Steve knows what he's talking about, he sees it a lot on those Subarus he loves so much.
anyone want a 97 civic dx that slightly burns oil????? $1800 come get it
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fc3.ac-images.myspacecdn.com%2Fimages02%2F106%2Fl_59528446bfba49cb88955b3815658552.jpg&hash=3c71f182e953b0e222953e5f07297a7afcb7fe42)
Is the body really that straight, and where are you? Some cash and some good parts in trade, we can walk away happy. Those cars are nice to daily drive if you ditch the D16Y failure.
-
yeah the body is that straight. theres only a couple dime sized rust spots on the hood. i'm located in binghamton, ny
-
Shit! I drive right through there to visit the side of my family I never want to see again.
Too far, sir. Ty though.
-
Got any better pics? I have cash in hand.
-
I'm kind of hating you right this moment, Dave.
-
Any rust kills it. Pass.
-
even small surface rust on the hood?
-
even small surface rust on the hood?
Rust is always 10x worse then you think. But if its just surface rust from paint chips thats a sweet car.
-
rust on the hood can be fixed by getting a new hood. O0
-
i bet your either your oil rings are siezed in the ringlands or the cylinders are egg shaped like a mofo...
-
faulty PCV Valve, likely never changed.
-
faulty PCV Valve, likely never changed.
mmmmmkay i'll get on that ::)
-
you should put a k series in it. They are super cheap and easy to install
-
faulty PCV Valve, likely never changed.
who in hell run a pcv valve these days?
-
faulty PCV Valve, likely never changed.
who in hell run a pcv valve these days?
Anyone concerned with engine longevity in a stock-ish car that doesn't have blowby problems.
-
what am talking about, 2 of my cars still have the original pcv system but they are bone stock . but since we on rhmt I ass u me that you would upraded your pcv system to a open system.
by the way you need to post some pics and video of the engine to give us an idea.
-
Are you sure it's not the oil pan?
-
ill see if i can get a video of start up to show you the smoking. it pretty much only smokes till its warmed up. i'll have to check the oil also to see if its gone through any oil since i filled it.