:::RHMT::: Real Home Made Turbo
General Category => Fabrication => Topic started by: weirtech on November 03, 2009, 02:47:13 PM
-
i guess there aren't any options out there for the f22 crowd. well, here's the first one:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2Fnormal_DSCN0288.JPG&hash=583e0a2b2e364a993b7c43ba91ccc114d24e9561)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2Fnormal_DSCN0291.JPG&hash=c85eb130f72449715a0ced907175b20d5273bf11)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2Fnormal_DSCN0290.JPG&hash=8aedf4a4cd0c6687268e5689e994e6955cbf3817)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2Fnormal_DSCN0292.JPG&hash=3b8a3df7ecac80778026df7c547db10bbf8b09fb)
-
Your welding is improving, good stuff.
-
so you just whipped this up for fun??
-
wow, you are dealing with Aluminium flanges?
looks good!! how much for it?
-
Not the first... but looks good.
-
Im assuming your using the newer accord bolt pattern 94+ at the throttle body?
-
Im assuming your using the newer accord bolt pattern 94+ at the throttle body?
no, the factory one. that is what he wanted. he also wants it anodized red.
-
Odd since you can only bore them out to 59mm. newer 94+ throttle body accord pattern is the same as b series/h series and 92+ d series so you can bolt on afermarket units
The 90-93 accord bolt pattern on the throttle body fits the 90-93 accord throttle body nothing else.
-
Odd since you can only bore them out to 59mm. newer 94+ throttle body accord pattern is the same as b series/h series and 92+ d series so you can bolt on afermarket units
The 90-93 accord bolt pattern on the throttle body fits the 90-93 accord throttle body nothing else.
It's possible he might know a guy that could weld a new throttle body flange on there if he decides later on that he needs a bigger TB...
-
HOw much would one of those run for? Depending on the price, I might be able to sell 2-3 of those for you.
nvm, I see you've made it over there. Beware of the incredibly stupid questions you'll be getting bugged with and the power hungry site owner.
-
HOw much would one of those run for? Depending on the price, I might be able to sell 2-3 of those for you.
nvm, I see you've made it over there. Beware of the incredibly stupid questions you'll be getting bugged with and the power hungry site owner.
say it isnt so!!!!!!!
-
yep :-\
-
that fucker bought cb7tuner? fuck me. time to delete myself
-
What? No. I'm talking about deev. He's been the owner for quite some time now. The only difference from him and RickP is that rickp is canadian.
-
so what would one of these go for. I'm sure way more then I can afford but I'd still like to know. And I'm never going to cb7tuner for any reason. Full of worthless ricers.
-
What? No. I'm talking about deev. He's been the owner for quite some time now. The only difference from him and RickP is that rickp is canadian.
ok, he's been a douche forever anyways
-
wow very nice you have a ton of skill.
-
so what would one of these go for.
$1600
-
You're definitely not going to make any money from cb7tuner people with those prices.
90% of the members there don't even put half of that into their motors.
Were you able to flow the runners at least?
-
so what would one of these go for.
$1600
HAHAHAHA thats the mean price for a CAR over there :mexi:
-
You're definitely not going to make any money from cb7tuner people with those prices.
90% of the members there don't even put half of that into their motors.
Were you able to flow the runners at least?
i dont' expect to sell intake manifolds over there. i expect to sell flanges to all the diy'ers. just like here. all the fab i'm doing is for local customers with the exception of the odd customer here and there.
no, i didn't get a chance to flow test it. if i could find someone local to test it, i'd probably take advantage of it.
-
The ones that are diy'ers are already here. Probably only like 4-5 of us.
-
Im assuming your using the newer accord bolt pattern 94+ at the throttle body?
no, the factory one. that is what he wanted. he also wants it anodized red.
I didn't think cast material (flange) anodized well at all, and even that's w/o years of pcv oil soaking in.
I'm surprised he didn't want a bigger plenum. I like the horns inside, along with the line of ports. Looks very nice.
-
Welding your logo on like that looks cool when it's new, but I imagine when dirt/debris get on it, you will never be able to get it to look like that again.
Still, ballin manifold, I need a TIG.
-
Welding your logo on like that looks cool when it's new, but I imagine when dirt/debris get on it, you will never be able to get it to look like that again.
Still, ballin manifold, I need a TIG.
I agree, next batch of logos you should make a recessed logo into the plate not a fully though cut.
-
Arron where did you get those velocity stacks/air horns? I'm looking for something similar.
-
Arron where did you get those velocity stacks/air horns? I'm looking for something similar.
we made them. the runners are one piece from flange to stack inside the plenum.
-
we made them. the runners are one piece from flange to stack inside the plenum.
You care to go into detail a bit on how you made them? you got me very interested here.
-
we made them. the runners are one piece from flange to stack inside the plenum.
You care to go into detail a bit on how you made them? you got me very interested here.
They appear to be turned.
-
yes, turned on a lathe from thick wall pipe. they have a 1.5 degree taper in the runner id.
-
pm me on those Arron.
-
pm me on those Arron.
well, i can make them to your spec, but they probably won't be cheap.
-
Yeah thinking about all that there like $26/e at www.velocity-of-sound.com (http://)
-
How long are the runners?
-
How long are the runners?
around 7" i think. it is out at the anodizer right now. i'll post up more pics when i get it back and take a measurement.
matt, i looked at their site, it doesn't really specify anything other than the id and length. what wall thickness do the come in? are the runners tapered at all? i'm sure you will find out when you call. let me know, i'm curious.
-
i have a customer interested in something like that for his Hiunday :?: race car
-
runners are 6.5" long.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2Fnormal_DSC00846.JPG&hash=aa461d8262113a9ec61257665750891cfcc95e05)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2Fnormal_DSC00847.JPG&hash=e142e45bc31285c0402ba85e27664cfcec3ff6d2)
-
Do you have the capability to machine the intake flange with injector bosses?
-
looked 10 x better not anodized :-\
-
looked 10 x better not anodized :-\
+10000000000000000000to the infiniti
-
looked 10 x better not anodized :-\
It's going on an Accord. who usaully owns accords? Mexicans Niggers white trash ricers that are to poor to b oh wait never mind. ;D
-
Blasphemy... You shut your whore mouth sir.... :evil:
-
Do you have the capability to machine the intake flange with injector bosses?
i'd probably have a flange like that cnc machined.
-
LOL it looks like those candy apple red Bicycle rims from the 80's