:::RHMT::: Real Home Made Turbo

General Category => General Discussion => Topic started by: Joseph Davis on November 13, 2009, 08:37:41 AM

Title: Who makes the best camshaft for rotories?
Post by: Joseph Davis on November 13, 2009, 08:37:41 AM: You see what I did there.
Title: Re: Who makes the best camshaft for rotories?
Post by: SQ is the SQUAD on November 13, 2009, 08:40:54 AM: toms "orange" series cams are hands down the biggest power makers on the market. we see crazy power/torque spikes with our dyno
Title: Re: Who makes the best camshaft for rotories?
Post by: 97Econobox on November 13, 2009, 08:41:59 AM: Ok so First complaint No peniswhistle brand? Everyone knows they are doing Rotary stuff now and not just Volkswagons. Why would you not go with a Peniswhistle cam?

and

JDSAP
Title: Re: Who makes the best camshaft for rotories?
Post by: bigdaddyvtec on November 13, 2009, 09:24:41 AM: I loled...
BISI BISI BISI

Best JD poll to date :noel:
Title: Re: Who makes the best camshaft for rotories?
Post by: Joseph Davis on November 13, 2009, 09:32:21 AM: Quote from: danwjmu on November 13, 2009, 08:42:57 AM
<---

You're about to be downgraded from the Staleard to a Henry, motherfucker.
Title: Re: Who makes the best camshaft for rotories?
Post by: oinesra on November 13, 2009, 09:50:16 AM: All kidding aside. Your best bet is either racingbeat.com, or an aaron cake regrind.
Title: Re: Who makes the best camshaft for rotories?
Post by: oinesra on November 13, 2009, 09:59:34 AM: Real talk... Say-another-motha-fuckin word. And this shits over.
Title: Re: Who makes the best camshaft for rotories?
Post by: oinesra on November 13, 2009, 10:04:38 AM: What's your AIM? We can work this out.
Title: Re: Who makes the best camshaft for rotories?
Post by: E-b0la on November 13, 2009, 10:16:55 AM: tom makes a bitchin cam, although the aaron cake regrind mentioned does sound tempting...
Title: Re: Who makes the best camshaft for rotories?
Post by: oinesra on November 13, 2009, 10:22:17 AM: I always wondered, if cams are 'regrinds' how do the make the lobes bigger by grinding them? Wouldn't that make them smaller?
Title: Re: Who makes the best camshaft for rotories?
Post by: Joseph Davis on November 13, 2009, 10:24:01 AM: You reduce the base circle, so that the lobe is bigger by comparison.
Title: Re: Who makes the best camshaft for rotories?
Post by: oinesra on November 13, 2009, 10:26:07 AM: I just googled "chillnnsht" and that name is for the admin of 'beastforums.com'

Gross.
Title: Re: Who makes the best camshaft for rotories?
Post by: oinesra on November 13, 2009, 10:37:48 AM: Who are the other two people with pink top mounts?
Title: Re: Who makes the best camshaft for rotories?
Post by: 97Econobox on November 13, 2009, 10:51:46 AM: Goddamnit Yoseph Davids. You have fucking Henryed me out of my vote for staleard. I did not vote for your cake friend. I voted for our own in house cam master staleard.
Title: Re: Who makes the best camshaft for rotories?
Post by: Aaron Cake on November 13, 2009, 11:01:22 AM: Fuck you Joseph, my rotary skills are far beyond your realm of knowledge.
Title: Re: Who makes the best camshaft for rotories?
Post by: bigdaddyvtec on November 13, 2009, 11:03:25 AM: I like pie. Cake is for fags
Title: Re: Who makes the best camshaft for rotories?
Post by: Avistar23 on November 13, 2009, 11:36:25 AM: I see what your doing here.....you think you can trick us before you know what pistons your using in it ;D :yes:
Title: Re: Who makes the best camshaft for rotories?
Post by: highroller54 on November 13, 2009, 11:40:54 AM: I phoned our local napa and told the ex GM counterperson who works at napa now that I had a customer with a corvair that needed a lower rad hose and his dad had died so get this done quick, I also told him if he didn't have a listing to phone the chevy dealer and find one. He ended up calling GM and then phoned me back :noel:
Title: Re: Who makes the best camshaft for rotories?
Post by: Robb on November 13, 2009, 12:07:56 PM: How exactly does one post tits OF gtfo???
Title: Re: Who makes the best camshaft for rotories?
Post by: jarebear667 on November 13, 2009, 12:15:21 PM: hype ARRRRRRRRRRR get some VTEC poppin ON DAT ROTORY
Title: Re: Who makes the best camshaft for rotories?
Post by: highroller54 on November 13, 2009, 01:44:49 PM: Quote from: Robb on November 13, 2009, 12:07:56 PM
How exactly does one post tits OF gtfo???

I believe jd want you to jiffy marker "gtfo" accross his chest and post pics :?:
Title: Re: Who makes the best camshaft for rotories?
Post by: Joseph Davis on November 13, 2009, 01:46:19 PM: Quote from: highroller54 on November 13, 2009, 01:44:49 PM
Quote from: Robb on November 13, 2009, 12:07:56 PM
How exactly does one post tits OF gtfo???

I believe jd want you to jiffy marker "gtfo" accross his chest and post pics :?:

FUCK YOU
Title: Re: Who makes the best camshaft for rotories?
Post by: oinesra on November 13, 2009, 02:09:37 PM: What the fuck is a jiffy marker?

Is that a canadian magic marker
Title: Re: Who makes the best camshaft for rotories?
Post by: Kain on November 13, 2009, 02:10:10 PM: LURK MOAR!!
Title: Re: Who makes the best camshaft for rotories?
Post by: random-strike on November 13, 2009, 04:10:15 PM: i make the best one, i sell them for only 100 dollars
Title: Re: Who makes the best camshaft for rotories?
Post by: Kain on November 13, 2009, 04:41:29 PM: Quote from: oinesra on November 13, 2009, 10:22:17 AM
I always wondered, if cams are 'regrinds' how do the make the lobes bigger by grinding them? Wouldn't that make them smaller?
they weld new material onto it and grind it to their specs.
Title: Re: Who makes the best camshaft for rotories?
Post by: Kain on November 13, 2009, 05:12:25 PM: Quote from: danwjmu on November 13, 2009, 04:43:14 PM
I posted that too, but then thought for a second he was trolling and deleted it :-\

yah i know.
Title: Re: Who makes the best camshaft for rotories?
Post by: oinesra on November 13, 2009, 05:16:40 PM: It worked :)
Title: Re: Who makes the best camshaft for rotories?
Post by: Corey on November 14, 2009, 06:19:15 AM: Quote from: Kain on November 13, 2009, 04:41:29 PM
Quote from: oinesra on November 13, 2009, 10:22:17 AM
I always wondered, if cams are 'regrinds' how do the make the lobes bigger by grinding them? Wouldn't that make them smaller?
they weld new material onto it and grind it to their specs.

no.
Title: Re: Who makes the best camshaft for rotories?
Post by: crttaz on November 14, 2009, 06:20:53 AM: Quote from: Corey on November 14, 2009, 06:19:15 AM
Quote from: Kain on November 13, 2009, 04:41:29 PM
Quote from: oinesra on November 13, 2009, 10:22:17 AM
I always wondered, if cams are 'regrinds' how do the make the lobes bigger by grinding them? Wouldn't that make them smaller?
they weld new material onto it and grind it to their specs.

no.

sometimes.

"hardwelded"
Title: Re: Who makes the best camshaft for rotories?
Post by: Corey on November 14, 2009, 06:23:10 AM: Quote from: crttaz on November 14, 2009, 06:20:53 AM
Quote from: Corey on November 14, 2009, 06:19:15 AM
Quote from: Kain on November 13, 2009, 04:41:29 PM
Quote from: oinesra on November 13, 2009, 10:22:17 AM
I always wondered, if cams are 'regrinds' how do the make the lobes bigger by grinding them? Wouldn't that make them smaller?
they weld new material onto it and grind it to their specs.

no.

sometimes.

"hardwelded"

hardly ever :P

unless the lobes are damaged or they are making a lobe so large it needs more matl.
Title: Re: Who makes the best camshaft for rotories?
Post by: oinesra on November 14, 2009, 08:43:14 AM: Im guessing its true that they weld A LOT on to a bridge port cam. They have a funny sound and don't really make much torke. Its from so must intakeand exhause overlap
Title: Re: Who makes the best camshaft for rotories?
Post by: crttaz on November 14, 2009, 11:33:43 AM: Quote
WEB-CAM has been hard welding and grinding cams since 1945. With our knowledge, and long time involvement with the racing industry WEB-CAM has proven to be the best.

.......
Title: Re: Who makes the best camshaft for rotories?
Post by: imburne on November 14, 2009, 05:01:59 PM: Cat Burrito!!!! (http://www.youtube.com/watch?v=xks-DiO7E74#normal)
Of course
Title: Re: Who makes the best camshaft for rotories?
Post by: Urban Indian on November 14, 2009, 05:42:42 PM: Quote from: Joseph Davis on November 14, 2009, 11:33:43 AM

I have a pink topmount intercooler 10 (10.4%)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi154.photobucket.com%2Falbums%2Fs248%2FUrban_Indian%2Fpinkfrontmount.jpg&hash=1260c7dfdcd565628e73d034e971087f81fceb82)
Title: Re: Who makes the best camshaft for rotories?
Post by: darkelvis on November 14, 2009, 07:45:54 PM: I happen to like lamb of god you old bag of fuck. :-*
Title: Re: Who makes the best camshaft for rotories?
Post by: Joseph Davis on November 14, 2009, 08:04:51 PM: You're a near-Canadian - you aren't telling us nothing we didn't already know.
Title: Re: Who makes the best camshaft for rotories?
Post by: darkelvis on November 14, 2009, 08:13:14 PM: I'm like 2.5-3 hrs from canada...doesn't change the fact that lamb of god has a good groove.
Title: Re: Who makes the best camshaft for rotories?
Post by: 97Econobox on November 17, 2009, 02:58:27 PM: Quote from: danwjmu on November 13, 2009, 04:43:14 PM
I posted that too, but then thought for a second he was trolling and deleted it :-\

You're cam knowledge is Serious. You should go tell Bisi whats hes doing wrong.

:mexi: :P