:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: Adam Hopkins on March 15, 2009, 12:12:11 PM

Title: My Wiring Info
Post by: Adam Hopkins on March 15, 2009, 12:12:11 PM

As I get time / cars to work on I will start updating this thread with more of my mad tyte ms paints.

Here is an OBD0 car with a OBD1 Distributor. I know this cant run but it is very helpful when trying to verify the stock wiring is correct when having a spark problem on a converted car. This particular car had a bad jumper harness straight from china. I hope this helps someone one day.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi281.photobucket.com%2Falbums%2Fkk233%2FAdamHopkins_photos%2FOBD0toOBD1Distributorplugwiring.jpg&hash=379f6d6e746fed0e7a5f644f057d0582794a2e2a)

Title: Re: My Wiring Info
Post by: walter on March 15, 2009, 06:14:37 PM

nice! anyway in boomslang you can get wiring for do this conversion, works great!

Title: Re: My Wiring Info
Post by: CivicOCD on March 20, 2009, 12:29:29 AM

Quote

I hope this helps someone one day.

that sounds like its coming from a long bad experience....

I know how that goes.
it triggered me to write a tech thread about it.
good shit

Title: Re: My Wiring Info
Post by: Adam Hopkins on March 21, 2009, 04:25:58 PM

I was the 4th person to try and wire the car correctly. I think number 3 was the idiot fuck stick that read the ecu plugs backwards and was cutting and splicing the completely wrong wires. So yes it was 2 very long days combined with a ton of solder and 2 packs of 1/8 inch shrink wrap. :?: