:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: Urban Indian on March 20, 2009, 12:37:44 PM

Title: I iz Noob. B-Series HeadGasket questions inside
Post by: Urban Indian on March 20, 2009, 12:37:44 PM

I Iz Noobs & waiting for the wolves. :noel:

Title: Re: I iz Noob. B-Series HeadGasket questions inside
Post by: brine04 on March 20, 2009, 01:33:48 PM

Not totally sure what you're asking. If you want to run an oem hg i believe you can run a b20 hg since they are 84mm. Or golden eagle buys honda gaskets and then bores them out to the desired bore.

Title: Re: I iz Noob. B-Series HeadGasket questions inside
Post by: bigdaddyvtec on March 20, 2009, 01:49:26 PM

I already told you on the phone last night you faggot.


1. Call Golden Eagle
2. Order Appropriate HG (Which will be an OEM one bored out PROPPERLY for your bore size)
3. Profit

I believe that the "bore" of the OEM HG is 1mm bigger than the itended Block bore size.

so if te bore of the cylinder is 81, the HG is 82. We covered this... Order a GE HG and be done with it. WHat you ll get is a OEM MLS gasket sized propperly for yo shiiiiiieeeeeet.

Use the copper spray too, shits the bomb   :noel:

Title: Re: I iz Noob. B-Series HeadGasket questions inside
Post by: dvst8r on March 20, 2009, 02:06:24 PM

Run the stock one, the pistons will self clearance the gasket...  :P

Title: Re: I iz Noob. B-Series HeadGasket questions inside
Post by: Urban Indian on March 20, 2009, 03:01:05 PM

I was going to run a GE one spiker. Then somehow JD decides to have me run around in a circle to run a stock one from honda.



Telling me I am noob and my shit is going to fail because of lack of knowledge.

I AM GOING TO RUN THE GOLDEN EAGLE STOCK HEAD GASKET JOSEPH DAVIS

Title: Re: I iz Noob. B-Series HeadGasket questions inside
Post by: dvst8r on March 20, 2009, 06:34:18 PM

Quote from: Urban Indian on March 20, 2009, 03:01:05 PM

Telling me I am noob and my shit is going to fail because of lack of knowledge.

Sounds about right.  :P

Title: Re: I iz Noob. B-Series HeadGasket questions inside
Post by: Urban Indian on March 20, 2009, 07:02:05 PM

Quote from: dvst8r on March 20, 2009, 06:34:18 PM

Quote from: Urban Indian on March 20, 2009, 03:01:05 PM

Telling me I am noob and my shit is going to fail because of lack of knowledge.

Sounds about right.  :P

Still waiting your eagle Vitara build nigger

Title: Re: I iz Noob. B-Series HeadGasket questions inside
Post by: dvst8r on March 20, 2009, 09:04:10 PM

Quote from: Urban Indian on March 20, 2009, 07:02:05 PM

Quote from: dvst8r on March 20, 2009, 06:34:18 PM

Quote from: Urban Indian on March 20, 2009, 03:01:05 PM

Telling me I am noob and my shit is going to fail because of lack of knowledge.

Sounds about right.  :P

Still waiting your eagle Vitara build nigger

Building a twin turbo dodge, need the tow vehicle first, the sleds won't get to the mountain by themselves...  :-*

On a side note I found an HX-52 for $150 bones, with 1000miles on it all minty mint, might pick that up for a vitara build. I still have this Z6 head here as well, it is just begging to be HOGGED out, after all I could careless about street driveablity / low end torque. If I build a Vitara motor it will just be a track slut. With that being said, I have been eyeing up something a little more RWD. More then likely I won't bother building anything this year other then the dodge, I will just buy a couple of dirt bikes, and another sled come fall.

Title: Re: I iz Noob. B-Series HeadGasket questions inside
Post by: widebody93 on March 20, 2009, 09:47:08 PM

U.I


Needs more sister pictures




GO