:::RHMT::: Real Home Made Turbo

General Category => General Discussion => Topic started by: raiden571 on November 23, 2009, 07:04:11 PM

Title: Wanna degree my Cams? ill pay ya
Post by: raiden571 on November 23, 2009, 07:04:11 PM
like it says, i just dont have the time to dick with it and i do not have a degree kit. i figure if there is someone in NE Ohio or the surrounding area that can do this and needs some extra money, let me know. the motor is fresh and clean and the car is in an enclosed garage. :noel:
Title: Re: Wanna degree my Cams? ill pay ya
Post by: highroller54 on November 23, 2009, 07:06:19 PM
fly me in.
Title: Re: Wanna degree my Cams? ill pay ya
Post by: raiden571 on November 23, 2009, 07:13:49 PM
hopin to get someone with in drivin distance ;)
Title: Re: Wanna degree my Cams? ill pay ya
Post by: sewell94 on November 24, 2009, 04:40:17 AM
How soon you need this done?? 
Title: Re: Wanna degree my Cams? ill pay ya
Post by: crttaz on November 24, 2009, 04:52:06 AM
Weren't you just up there?????

You NEED a burrito!
Title: Re: Wanna degree my Cams? ill pay ya
Post by: sewell94 on November 24, 2009, 04:54:34 AM
i was, but i need some xmas booty.


and a burrito :mexi:
Title: Re: Wanna degree my Cams? ill pay ya
Post by: chris on November 24, 2009, 05:14:14 AM
what motor
Title: Re: Wanna degree my Cams? ill pay ya
Post by: raiden571 on November 25, 2009, 03:02:59 PM
type R   s2s2 cams. there has been material taken off the head and block.
needs done sometime in the next month or so
Title: Re: Wanna degree my Cams? ill pay ya
Post by: sewell94 on November 25, 2009, 03:30:08 PM
I'll be in youngstown in a few weeks if you still need it done.
Title: Re: Wanna degree my Cams? ill pay ya
Post by: highroller54 on November 25, 2009, 03:33:10 PM
 s2s2 cams

kill yourself.
Title: Re: Wanna degree my Cams? ill pay ya
Post by: raiden571 on November 25, 2009, 05:40:22 PM
 s2s2 cams

kill yourself.
why do you say that. i got them for relatively cheap and liked the way they looked on most peoples graphs. the build is for road racing so im not concerned with making peak power, i want a nice curve
if your serious about it, shoot me a message and ill give you my cell number. if your in y'town, your only 20-25mins from my place. i go to school at YSU, so i know the drive
Title: Re: Wanna degree my Cams? ill pay ya
Post by: highroller54 on November 26, 2009, 12:00:05 AM
I just hate skunk2 junk. I wouldn't give you 5 dollars for 10 of everything they make.
Title: Re: Wanna degree my Cams? ill pay ya
Post by: turbohf on November 26, 2009, 12:20:16 AM
i made more power on stock cams and a smaller motor than i made on baller S2 Pro2 cams...
Title: Re: Wanna degree my Cams? ill pay ya
Post by: sewell94 on November 26, 2009, 12:32:35 AM
i made more power on stock cams and a smaller motor than i made on baller S2 Pro2 cams...

What setup??
Title: Re: Wanna degree my Cams? ill pay ya
Post by: turbohf on November 26, 2009, 12:41:54 AM
i made more power on stock cams and a smaller motor than i made on baller S2 Pro2 cams...

What setup??

lol, stock B18C + 10psi vs B20VTEC w/pro2s and all the other NAgayness lol
Title: Re: Wanna degree my Cams? ill pay ya
Post by: Joseph Davis on November 26, 2009, 11:49:45 AM
I just hate skunk2 junk. I wouldn't give you 5 dollars for 10 of everything they make.

I like their cam gears.  A lot.
Title: Re: Wanna degree my Cams? ill pay ya
Post by: highroller54 on November 26, 2009, 12:02:26 PM
I just hate skunk2 junk. I wouldn't give you 5 dollars for 10 of everything they make.

I like their cam gears.  A lot.

really? They acually make something right?, all there shit is just chinnesse junk marked way up.
Title: Re: Wanna degree my Cams? ill pay ya
Post by: hatchboy on November 26, 2009, 05:56:21 PM
type R   s2s2 cams. there has been material taken off the head and block.
needs done sometime in the next month or so
I never understood why people took out their ITR cams and replaced them with other cams unless they were doing a big big build.

I was under the assumption ITR/CTR cam's were pretty decent cams for NA and for boost.

I know my ITR/CTR combo seems to love my turbo.
Title: Re: Wanna degree my Cams? ill pay ya
Post by: highroller54 on November 26, 2009, 05:59:25 PM
I love my itr camz also.
Title: Re: Wanna degree my Cams? ill pay ya
Post by: Joseph Davis on November 26, 2009, 06:17:50 PM
I just hate skunk2 junk. I wouldn't give you 5 dollars for 10 of everything they make.

I like their cam gears.  A lot.

really? They acually make something right?, all there shit is just chinnesse junk marked way up.

Yup, their cam gears are sweet, both old school and the new Pro series.  Overpriced, agreed, but nice units.  All the set's I've bought were used and therefore affordable.
Title: Re: Wanna degree my Cams? ill pay ya
Post by: hatchboy on November 26, 2009, 07:14:03 PM
I just hate skunk2 junk. I wouldn't give you 5 dollars for 10 of everything they make.

I like their cam gears.  A lot.

really? They acually make something right?, all there shit is just chinnesse junk marked way up.

Yup, their cam gears are sweet, both old school and the new Pro series.  Overpriced, agreed, but nice units.  All the set's I've bought were used and therefore affordable.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg37.imageshack.us%2Fimg37%2F807%2Fhondacrx013small.jpg&hash=c8ec04c50f8c288a97631eebe7e348796b77d21b)
Title: Re: Wanna degree my Cams? ill pay ya
Post by: raiden571 on November 26, 2009, 07:14:58 PM
there the stage2's not pro2's, and yes it is for an NA engine.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi561.photobucket.com%2Falbums%2Fss51%2Fraiden571%2F100_0229.jpg&hash=1cd1dc5c8d249ad289cc0c5a18b629b86e7bc7ac)
Title: Re: Wanna degree my Cams? ill pay ya
Post by: highroller54 on November 26, 2009, 07:33:37 PM
it is for an NA engine.

lets get raiden added for banhammer wednesday asap.
Title: Re: Wanna degree my Cams? ill pay ya
Post by: colt45 on November 26, 2009, 07:40:54 PM
lets get raiden added for banhammer wednesday asap.

i second
Title: Re: Wanna degree my Cams? ill pay ya
Post by: crxvtec91 on November 26, 2009, 07:40:53 PM
I just hate skunk2 junk. I wouldn't give you 5 dollars for 10 of everything they make.

I like their cam gears.  A lot.

really? They acually make something right?, all there shit is just chinnesse junk marked way up.

FUCK SKank2 cdm trash
Title: Re: Wanna degree my Cams? ill pay ya
Post by: raiden571 on November 28, 2009, 11:26:23 PM
it is for an NA engine.

lets get raiden added for banhammer wednesday asap.
what the hell are you talking about,
no one has hit me up yet
Title: Re: Wanna degree my Cams? ill pay ya
Post by: potatodude on November 28, 2009, 11:33:22 PM
it is for an NA engine.

lets get raiden added for banhammer wednesday asap.
what the hell are you talking about,
no one has hit me up yet

...Not the brightest boy in school huh?
Title: Re: Wanna degree my Cams? ill pay ya
Post by: raiden571 on November 28, 2009, 11:37:31 PM
nope i rode in the short bus and mounted them 'tarded bitches in the back. they always be screamin so noone notices
Title: Re: Wanna degree my Cams? ill pay ya
Post by: Joseph Davis on November 29, 2009, 12:47:25 AM
zing!