:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: Vagitarian on December 08, 2009, 02:05:06 AM

Title: D16 replacement motor mounts??
Post by: Vagitarian on December 08, 2009, 02:05:06 AM: Are there any companies that make factory motor mounts for the D16a6 in an EF chasiss? My stock mounts are shit, And instead of buying new oems and doing the window weld mod, ar there any nice mount out there for a daily car that bolt the stock motor in place??

I dont need the front mount if it matters
Title: Re: D16 replacement motor mounts??
Post by: theidealone on December 08, 2009, 02:42:03 AM: Why would you buy new OEMs if you were going to window weld? And yes, companies do make replacements.
Title: Re: D16 replacement motor mounts??
Post by: chris on December 08, 2009, 02:46:06 AM: hasport
Title: Re: D16 replacement motor mounts??
Post by: Vagitarian on December 08, 2009, 03:48:58 AM: I was GOING to window weld, but mine have sat for 2 years, and are probly rusty (i havent been back to the car in a while) so Id rather just replace them entirely

Well I found some for $200 from innovative, but I havent seen the car in a while, so I forget what the mounts look like, but are these 3 pieces everything Id need, or would I have to use stock bracketry aswell still??

http://www.innovativemounts.com/ProductDetails.asp?ProductCode=19151 (http://www.innovativemounts.com/ProductDetails.asp?ProductCode=19151)
Title: Re: D16 replacement motor mounts??
Post by: Vagitarian on December 08, 2009, 03:49:22 AM: I seen the hasports aswell, but there like $300 something, for the same product that innovative has
Title: Re: D16 replacement motor mounts??
Post by: snm95ls on December 08, 2009, 04:19:31 AM: It looks like the replacement mounts will still use the the funky factory bracket on the transmission for the passnenger side mount.

The B swap mounts eliminate that piece.
Title: Re: D16 replacement motor mounts??
Post by: Vagitarian on December 08, 2009, 04:27:25 AM: Id love a kit that replaced that crap on the tranny aswell, mine has been bent/hit and is pretty rusty and corroded, passed what a coat of tremclad can repair lol
Title: Re: D16 replacement motor mounts??
Post by: ryan89crx on December 08, 2009, 11:33:59 AM: http://www.explicitspeedperformance.net/MMK.html (http://www.explicitspeedperformance.net/MMK.html)
Title: Re: D16 replacement motor mounts??
Post by: ApexSilver06MR on December 08, 2009, 12:37:56 PM: prothane!!!!
Title: Re: D16 replacement motor mounts??
Post by: Vagitarian on December 08, 2009, 01:39:03 PM: Prothane??

Te explicit speed seem to be complete replacements of that tranny mount aswell, that doesnt use nything stock at all does it othern than hardware
Title: Re: D16 replacement motor mounts??
Post by: klyph on December 08, 2009, 02:54:12 PM: Delrin.

Hockey pucks.

Do work.
Title: Re: D16 replacement motor mounts??
Post by: onlyflash944 on December 08, 2009, 06:26:49 PM: rhmt style solid or none at all

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi91.photobucket.com%2Falbums%2Fk295%2Fonlyflash944%2FRed%2520CX%2FEngine%2FP1010412.jpg&hash=7d361c3015abddc6327cc9eac0ce9b1d619b9949)
Title: Re: D16 replacement motor mounts??
Post by: Vagitarian on December 08, 2009, 07:10:36 PM: I could never do solid mounts lol, this is a 30km commute daily car, and my stockers are gross and deterierating
Title: Re: D16 replacement motor mounts??
Post by: klyph on December 08, 2009, 07:14:44 PM: Quote from: Vagitarian on December 08, 2009, 07:10:36 PM
gross and deterierating
The very definition of rHMT.
Title: Re: D16 replacement motor mounts??
Post by: danz on December 08, 2009, 09:05:44 PM: talking in KM and denying the birth right which is solid mounts?

what

the

fuck
Title: Re: D16 replacement motor mounts??
Post by: Vagitarian on December 08, 2009, 09:55:45 PM: So is innovative the only $200 option I have then possibly just fab the rest of the tranny mount myself??
Title: Re: D16 replacement motor mounts??
Post by: PhilStubbs on December 08, 2009, 10:29:42 PM: i like innovative stuff. i have their cable b series tranny into eg kit in my car. works awesome
Title: Re: D16 replacement motor mounts??
Post by: Vagitarian on December 09, 2009, 01:53:07 AM: I also just heard theres a D->B tranny conversion....... fuck me
Title: Re: D16 replacement motor mounts??
Post by: PhilStubbs on December 09, 2009, 09:24:26 AM: the only one i have seen was where a guy modified a B tranny to fit a D block. there was no adaptor plate and i think he had a D flywheel modified to work with a B clutch.

link to adaptor?
Title: Re: D16 replacement motor mounts??
Post by: theidealone on December 09, 2009, 02:18:27 PM: ^Friend of mine. He machined the flywheel to fit a twin. LOL. Welded the holes, and drilled/tapped his own on the engine side.

And someone make me a pair of the solid mounts! :D (Sides. ED. Seriously. My ZC isnt gangster without them.)
Title: Re: D16 replacement motor mounts??
Post by: 97Econobox on December 10, 2009, 11:38:24 AM: (https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.theemptyroom.com%2FShare%2Fnauseous.gif&hash=d25a83160f0498c481761eaa3b6301a00d334cfe)
Title: Re: D16 replacement motor mounts??
Post by: Vagitarian on December 10, 2009, 01:23:53 PM: Looks like all my mounts but the drivers side is gonna be custom anyways now with this B tranny conversion

Anyone have a good place to buy motor mount pieces??
Title: Re: D16 replacement motor mounts??
Post by: PhilStubbs on December 10, 2009, 02:11:00 PM: this is the best place i have found for random polyurethane bushings

http://www.polybushings.com/ (http://www.polybushings.com/)
Title: Re: D16 replacement motor mounts??
Post by: Tom@OCZCTuning on December 10, 2009, 10:54:39 PM: Quote from: Vagitarian on December 10, 2009, 01:23:53 PM
Looks like all my mounts but the drivers side is gonna be custom anyways now with this B tranny conversion

Anyone have a good place to buy motor mount pieces??

you sir are a failure of life!

get a rope and

D
Title: Re: D16 replacement motor mounts??
Post by: ryan89crx on December 10, 2009, 11:00:29 PM: I
Title: Re: D16 replacement motor mounts??
Post by: klyph on December 10, 2009, 11:03:31 PM: S
C
O
U
R
A
G
E

Y
O
U
R
S
E
L
F

F
R
O
M

M
A
K
I
N
G

T
H
O
S
E

D
E
C
I
S
I
O
N
S

I
N

T
H
E

F
U
T
U
R
E
Title: Re: D16 replacement motor mounts??
Post by: onlyflash944 on December 10, 2009, 11:05:02 PM: a simple scrolling 'e' would have been nice
Title: Re: D16 replacement motor mounts??
Post by: klyph on December 10, 2009, 11:06:25 PM: Quote from: onlyflash944 on December 10, 2009, 11:05:02 PM
a simple scrolling 'e' would have been nice
E
Title: Re: D16 replacement motor mounts??
Post by: onlyflash944 on December 10, 2009, 11:13:35 PM: Quote from: klyph on December 10, 2009, 11:06:25 PM
Quote from: onlyflash944 on December 10, 2009, 11:05:02 PM
a simple scrolling 'e' would have been nice
E

what, no ninja edit?
Title: Re: D16 replacement motor mounts??
Post by: klyph on December 10, 2009, 11:19:37 PM: There was no edit necessary, you got what you asked for.
Title: Re: D16 replacement motor mounts??
Post by: onlyflash944 on December 10, 2009, 11:27:01 PM: Quote from: klyph on December 10, 2009, 11:19:37 PM
There was no edit necessary, you got what you asked for.

your sn reminds me of fysh's
Title: D16 replacement motor mounts
Post by: orevosy09 on December 28, 2009, 08:09:23 PM: I really need to change on the old motor mounts on my 1989 5.0 LX. Can they be changed without an engine hoist and in my drive way?
Title: Re: D16 replacement motor mounts??
Post by: PhilStubbs on December 28, 2009, 08:11:09 PM: Yup, floor jack and a block of wood underthe oil pan
Title: Re: D16 replacement motor mounts??
Post by: Phate on December 30, 2009, 12:27:18 AM: I'm probably just gonna shoot some form of homedepot/lowes polyurethane into mine. Sure beats spending real money on new ones.
Title: Re: D16 replacement motor mounts??
Post by: trevor72 on January 05, 2010, 08:23:54 PM: Quote from: Vagitarian on December 10, 2009, 01:23:53 PM
Looks like all my mounts but the drivers side is gonna be custom anyways now with this B tranny conversion

Anyone have a good place to buy motor mount pieces??

guess i was wrong to judge you based on your cool sig.

custom mounts for a honda, bahaha nagger, wtf use what you have