:::RHMT::: Real Home Made Turbo

General Category => Fabrication => Topic started by: turbob16hatch on December 11, 2009, 06:10:40 AM

Title: 1.25" sch 10 d series manifold
Post by: turbob16hatch on December 11, 2009, 06:10:40 AM

Here is my "quick spool" turbo manifold i just got done building using 1.25" sch 10 and a 2" collector. We will see how it works out.


(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi71.photobucket.com%2Falbums%2Fi123%2Fmattgroshong%2F4doormanifold003.jpg&hash=e2328c5b226970cbeb477b9ce1cfad313172b05d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi71.photobucket.com%2Falbums%2Fi123%2Fmattgroshong%2F4doormanifold005.jpg&hash=aa4e6659c24af743355f2a11c703aa0ab0abf42c)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi71.photobucket.com%2Falbums%2Fi123%2Fmattgroshong%2F4doormanifold006.jpg&hash=ca3ac5683867df205a1cdc45118d3eb196c2a3cf)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi71.photobucket.com%2Falbums%2Fi123%2Fmattgroshong%2F4doormanifold009.jpg&hash=97388012cf41356064bc2c345ead861d668b8584)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi71.photobucket.com%2Falbums%2Fi123%2Fmattgroshong%2F4doormanifold010.jpg&hash=8b5b2c6c5eac2cc86491393fe14f71066086fc65)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi71.photobucket.com%2Falbums%2Fi123%2Fmattgroshong%2F4doormanifold011.jpg&hash=a294084a051b6ede1178432f3cdc3418f7d44e16)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi71.photobucket.com%2Falbums%2Fi123%2Fmattgroshong%2F4doormanifold012.jpg&hash=723b86a041593acd9cb5807f8ac56cf8bd880da0)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi71.photobucket.com%2Falbums%2Fi123%2Fmattgroshong%2F4doormanifold013.jpg&hash=448198ee87d1f5511dd12fd02029dce82669dff3)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi71.photobucket.com%2Falbums%2Fi123%2Fmattgroshong%2F4doormanifold014.jpg&hash=3e940c5b341d1f2437dba0cb35efe91009871074)

Title: Re: 1.25" sch 10 d series manifold
Post by: CSaddict on December 11, 2009, 06:56:47 AM

Certainly looks nice.  Post that thing on D-series.org. They will come in packs for some of those.

Title: Re: 1.25" sch 10 d series manifold
Post by: turbob16hatch on December 11, 2009, 07:03:24 AM

i want to test this out before trying to sell them, see if the thing will work.

Title: Re: 1.25" sch 10 d series manifold
Post by: bigdaddyvtec on December 11, 2009, 07:37:39 AM

Very fucking nice

Title: Re: 1.25" sch 10 d series manifold
Post by: t_cel_t on December 11, 2009, 01:17:02 PM

not a criticism, it looks baller, but why do the welds look really wide?

it looks like your doing strait travel but it just seems very wide.

Title: Re: 1.25" sch 10 d series manifold
Post by: turbob16hatch on December 11, 2009, 01:45:39 PM

I thought someone might ask that. I do a tech. i was told is lay wire were you never pull the wire from the puddle while laying a bead. I then work the torch to get the desired height and width of the puddle. What happened on some is i had a mix of sch 40 straight and sch 10 bends. (they only had sch 40 straight at my local supplier).

So to get and even profile on the welds i increased the bevel width soem to help with looks. With out this i could have one or two welds that woudl be quite larger then the others and would ruin everything in my eyes.

They also look a bit wider as this is 1.25" sch pipe vs the standard 1.5" pipe. it is quite a bit smaller.

Title: Re: 1.25" sch 10 d series manifold
Post by: Vagitarian on December 11, 2009, 02:43:08 PM

Shit dude get a backdoor intercooler and youre fukin set

Title: Re: 1.25" sch 10 d series manifold
Post by: walter on December 11, 2009, 02:46:30 PM

Quote from: t_cel_t on December 11, 2009, 01:17:02 PM

not a criticism, it looks baller, but why do the welds look really wide?

it looks like your doing strait travel but it just seems very wide.

what is the problem with wide welds? :noel:

looks nice!