:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: keelay on December 14, 2009, 12:57:38 AM
-
010010100111010101110011011101000010000001100110011011110111001000100000011110010110111101110101001000000100101001000100
-
010010100111010101110011011101000010000001100110011011110111001000100000011110010110111101110101001000000100101001000100
-1
-
Just for you JD
-
010010100111010101110011011101000010000001100110011011110111001000100000011110010110111101110101001000000100101001000100
-1
-
46 75 63 6b 20 79 6f 75 20 6e 69 67 67 65 72 73
-
46 75 63 6b 20 79 6f 75 20 6e 69 67 67 65 72 73
Fuck you niggers
-
SGVyZXMgc29tZSBwb3Ju
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg66.imageshack.us%2Fimg66%2F7265%2F12395725876.jpg&hash=0392d1129a3aaf9ecca0057fc2d16168b81e502c)
-
I'm also guessing you nogs are googling this shit, no way everyone here knows fucking hex, binary, and base64
-
I'm also guessing you nogs are googling this shit, no way everyone here knows fucking hex, binary, and base64
Some of us are just low-rent hardcore pipe-hitting motherfuckers who dont give a flying fuck.
-
I'm also guessing you nogs are googling this shit, no way everyone here knows fucking hex, binary, and base64
Some of us are just low-rent hardcore pipe-hitting motherfuckers who dont give a flying fuck.
If I didn't have drug testing I'd be hitting the pipe with you bro
-
I'm also guessing you nogs are googling this shit, no way everyone here knows fucking hex, binary, and base64
I am just that fucking good.
8)
-
I'm also guessing you nogs are googling this shit, no way everyone here knows fucking hex, binary, and base64
While I have been using a translator in the interest of time...
bin, oct, hex amd ascii are all explored previously... Its nothing outside of the scope of a 4 year college second semester CSCI program . :mexi:
-
or bored people like myself that learn shit to occupy time
-
DEC 25 = OCT 31 :o
-
in a way, yes
-
Is this a fucking pro-Hondata thread?
-
I actualluy loled.
Well played sir
-
SGVyZXMgc29tZSBwb3Ju
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg66.imageshack.us%2Fimg66%2F7265%2F12395725876.jpg&hash=0392d1129a3aaf9ecca0057fc2d16168b81e502c)
Looks like she has a big ass herp breakout in the right corner of her mouth
-
Is this a fucking pro-Hondata thread?
010001100111010101100011011010110010000001101000011011110110111001100100011000010111010001100001
-
Looks like she has a big ass herp breakout in the right corner of her mouth
Why you gotta fuck up my porn?
-
Is this a fucking pro-Hondata thread?
010001100111010101100011011010110010000001101000011011110110111001100100011000010111010001100001
You of all peolple I thought you start think HEX by now.
And to all the Binary fucks this is so "pre DCAC" talk faggorty to the one that started it I think SPIKER MR.Hondata K pro ant-ECTUNE yo H-T Wizard cack lover :yes:
-
SGVyZXMgc29tZSBwb3Ju
[img]http://img66.imageshack.us/img66/7265/12395725876.jpg[/img
Looks like she has a big ass herp breakout in the right corner of her mouth
wouldnt stop me :noel:
-
Is this a fucking pro-Hondata thread?
010001100111010101100011011010110010000001101000011011110110111001100100011000010111010001100001
You of all peolple I thought you start think HEX by now.
And to all the Binary fucks this is so "pre DCAC" talk faggorty to the one that started it I think SPIKER MR.Hondata K pro ant-ECTUNE yo H-T Wizard cack lover :yes:
47 6f 20 65 61 74 20 73 6f 6d 65 20 62 6f 79 20 70 75 73 73 79 20 66 61 67 67 6f 74
-
SGVyZXMgc29tZSBwb3Ju
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg66.imageshack.us%2Fimg66%2F7265%2F12395725876.jpg&hash=0392d1129a3aaf9ecca0057fc2d16168b81e502c)
Looks like she has a big ass herp breakout in the right corner of her mouth
I don't see it. I do see the big ass herp breakout in the left corner of her mouth, though.
-
i just ripped ass and it smelled like cocao (not cock jeremy put it away) and sounded like 0000101001010169
-
01100111 01101111 00100000 01100110 01110101 01100011 01101011 00100000 01100001 00100000 01100111 01101111 01100001 01110100
-
I'm also guessing you nogs are googling this shit, no way everyone here knows fucking hex, binary, and base64
Sorry, I stopped with BASIC on a Apple IIe in 1983-1984
-
01010100 01101000 01101001 01110011 00100000 01110100 01101000 01110010 01100101 01100001 01100100 00100000 01110111 01110010 01100101 01100001 01101011 01110011 00100000 01101111 01100110 00100000 01100111 01100101 01100101 01101011 00100000 01100110 01100001 01100111 01100111 01101111 01110100 01110010 01111001
-
00101011 00110001
-
01010100 01101000 01101001 01110011 00100000 01110100 01101000 01110010 01100101 01100001 01100100 00100000 01110111 01110010 01100101 01100001 01101011 01110011 00100000 01101111 01100110 00100000 01100111 01100101 01100101 01101011 00100000 01100110 01100001 01100111 01100111 01101111 01110100 01110010 01111001
011000010110011101110010011001010110010101100100
-
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
A real man could see I just posted porn (girl in quote's clit)... ;D
FYI the mind can ACTUALLY be trained to read this kind of shit. I've actually met speed readers who read/absorb an entire page in almost 1 second - they do the same looking at text that we do looking at a picture.
-
Is this a fucking pro-Hondata thread?
010001100111010101100011011010110010000001101000011011110110111001100100011000010111010001100001
You of all peolple I thought you start think HEX by now.
And to all the Binary fucks this is so "pre DCAC" talk faggorty to the one that started it I think SPIKER MR.Hondata K pro ant-ECTUNE yo H-T Wizard cack lover :yes:
47 6f 20 65 61 74 20 73 6f 6d 65 20 62 6f 79 20 70 75 73 73 79 20 66 61 67 67 6f 74
BLAH
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi286.photobucket.com%2Falbums%2Fll90%2Fwidebody93%2F51FG46D1KTL__SS500_.jpg&hash=0c437d97f0bd1023551cfa3d384cd55e16ee2135)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi286.photobucket.com%2Falbums%2Fll90%2Fwidebody93%2F180px-Wiki-fisting-2.png&hash=244ee6883a8347db81d21d134a12db1caa56fc51)
-
I have never met anybody that has as much trouble putting together a fucking sentence in all my life as you. Ever.
-
I have never met anybody that has as much trouble putting together a fucking transmission in all my life as you. Ever.
zing!
-
ha
ha
ha
ha
-
What is a good source for learning about binary code? I've had to make changes to parameters in my mills' control but I don't have any understanding on how it all works.
-
What is a good source for learning about binary code? I've had to make changes to parameters in my mills' control but I don't have any understanding on how it all works.
You mean machine language, called binary, but always manipulated in hex at it's lowest level?
Start off at www.8052.com (http://), it deals with the Intel 8051 which is about the cheapest most basic chip to learn on. Jumping from there into whatever MCU your mill runs is pretty simple... as simple as these things get, anyway. I really do recommend getting your feet wet DIY, and then seek out a class on it. Frankly, I got an A in Microcontrollers although, in my opinion, I deserved a B even though my feet have been wet for a while. You might find that pushing bits around is frustrating and that you do not like it.
-
I have never met anybody that has as much trouble putting together a fucking transmission in all my life as you. Ever.
zing!
Then again youve never owned anything that makes as much powar as my pile of shit either. Ever. :-*
-
No, but I have tuned vehicles (plural) that made more, as well as vehicles that have gone a lot faster than your boat anchor ever will. Your point?
-
Then again youve never owned anything that makes as much powar as my pile of shit either. Ever. :-*
Pretty sure i made it
-
What is a good source for learning about binary code? I've had to make changes to parameters in my mills' control but I don't have any understanding on how it all works.
You mean machine language, called binary, but always manipulated in hex at it's lowest level?
Start off at www.8052.com (http://) (http://) (http://), it deals with the Intel 8051 which is about the cheapest most basic chip to learn on. Jumping from there into whatever MCU your mill runs is pretty simple... as simple as these things get, anyway. I really do recommend getting your feet wet DIY, and then seek out a class on it. Frankly, I got an A in Microcontrollers although, in my opinion, I deserved a B even though my feet have been wet for a while. You might find that pushing bits around is frustrating and that you do not like it.
I took a quick look at that link, seems pretty informative, however it seems they already expect you to have a understanding of binary and hexidecimal code, I don't.
Do I need to understand the logic behind microcontrollers in order to understand binary and hexidecimal or is itthe other way around? Or do you just have to know both? I don't have a lot of interest in learning how to program this stuff at the moment as I am already learning as much as I can absorb in other areas, but I have always been curious what is going on when I modify parameters on my machines control.
-
What is a good source for learning about binary code? I've had to make changes to parameters in my mills' control but I don't have any understanding on how it all works.
You mean machine language, called binary, but always manipulated in hex at it's lowest level?
Start off at www.8052.com (http://) (http://) (http://) (http://) (http://) (http://), it deals with the Intel 8051 which is about the cheapest most basic chip to learn on. Jumping from there into whatever MCU your mill runs is pretty simple... as simple as these things get, anyway. I really do recommend getting your feet wet DIY, and then seek out a class on it. Frankly, I got an A in Microcontrollers although, in my opinion, I deserved a B even though my feet have been wet for a while. You might find that pushing bits around is frustrating and that you do not like it.
I took a quick look at that link, seems pretty informative, however it seems they already expect you to have a understanding of binary and hexidecimal code, I don't.
Do I need to understand the logic behind microcontrollers in order to understand binary and hexidecimal or is itthe other way around? Or do you just have to know both? I don't have a lot of interest in learning how to program this stuff at the moment as I am already learning as much as I can absorb in other areas, but I have always been curious what is going on when I modify parameters on my machines control.
Binary is 0 or 1, hexadecimal is counting 0-15. You are used to decimal, counting 0 through 9. That sums it, aside from the fact hex is represented as 0-9, A-F, to represent 0-15.
Everything else is opcodes, and how they work. Frankly, I intend to retake my Microcontrollers class although I have the basics. There's just a reassurance from having someone who knows the shit hold your hand through it. I'm really good with traditional programming languages, but assembler breaks things down too simply for me to follow without getting confused.
I know I'm a bright guy, similar to yourself but with more electronics background, so I know it's just a matter of time spent. How far you need to go is entirely subjective, but guessing how much time you have to spare and ASSuming you make a determined effort, you could know what you need to in a year and a half (for me 6 months). I spent a lot of time on (and pride myself on) Linear circuits, but most programmers/Digital guys have no idea about any of that and get right to the core of the matter. Most digital apps don't need to worry about a high sampling rate on analog inputs, and as processors approach the Ghz range they can sample automotive speed signals at a fine enough resolution that they don't need to worry about it. Since this is a hobby for you I suggest you take the pure digital route and ask retro geeks like me about plotting Q-points on transistors or wtf people use opamps for.
-
.____ __ ______ __ ___
| _ \ | | / || |/ / | _ \
| |_) | | | | ,----' | ' / | |_) |
| / | | | | | < | ___/
| |\ \----. | | | `----.| . \ | | __
| _| `.___| | \____||__|\_\ | _| (__)
__ ___. __ _______ _ _____
| | / | / \ | ____| / \ / ____|
| | | (----` / ^ \ | |__ / ^ \ | | __
| | \ \ / /_\ \ | __| / /_\ \ | | |_ |
| | .----) | / _____\ | | / ____ \ | |__| |
|_| |____/ /__/ \__\ |__| /__/ \__\ \_____|
-
01000101011000010111010000100000011011010110010100101110
-
.____ __ ______ __ ___
| _ \ | | / || |/ / | _ \
| |_) | | | | ,----' | ' / | |_) |
| / | | | | | < | ___/
| |\ \----. | | | `----.| . \ | | __
| _| `.___| | \____||__|\_\ | _| (__)
__ ___. __ _______ _ _____
| | / | / \ | ____| / \ / ____|
| | | (----` / ^ \ | |__ / ^ \ | | __
| | \ \ / /_\ \ | __| / /_\ \ | | |_ |
| | .----) | / _____\ | | / ____ \ | |__| |
|_| |____/ /__/ \__\ |__| /__/ \__\ \_____|
You mean 52 49 43 4B 20 50 2E 20 49 53 20 41 20 46 41 47 2E. I'd like to see that posted in everyone's ohmt sig.... :noel:
What is a good source for learning about binary code? I've had to make changes to parameters in my mills' control but I don't have any understanding on how it all works.
There's the actual data, for which 8-bit blocks (1 byte) are represented as hexadecimal (two 16 values, each 0-F), then there's machine language like assembly code, then there's the most common cnc instructions for a part called g-code.
Parameters are usually just simple blocks of variables. If you know what you changed and compare before/after data with a program that compares code, you can start to see what parameters are where, how many bytes each use, etc. Then you can start manipulating them yourself with a hex editor, and eventually you'll notice a "grand design". Gaming is how I got into that - find which bytes control ammo, armor, speed, car weight, etc - and you could become a god online with Interstat '76.
One thing to look into is old-skool Nissan roms, or any older roms for that matter. They're rediculously simple and well documented, and you can find web pages with java apps that convert a new injector size or MAF value to hex, for example.
-
One thing to look into is old-skool Nissan roms, or any older roms for that matter. They're rediculously simple and well documented, and you can find web pages with java apps that convert a new injector size or MAF value to hex, for example.
Nothing is better commented than the old GM stuff, if you want to learn.