:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: jdmhatchracer94 on December 17, 2009, 12:55:10 AM

Title: I fucking hate this accord HELP
Post by: jdmhatchracer94 on December 17, 2009, 12:55:10 AM: okay long and short 96 coupe blew the stock f22b what ever kid replaced it wit a f23a1 got the fuckin thing runnin but now it only revs to 5k and bogs like it's hittin the rev limiter. No cels nothin. The kid got a obd1 jumper and chipped p28 but I dunno who did the work. WTF could this be i hate this fuckin car
Title: Re: accord help
Post by: 88dx on December 17, 2009, 01:10:16 AM: A coil has 2 wires you can figure it out ;)
Title: Re: accord help
Post by: jdmhatchracer94 on December 17, 2009, 01:12:01 AM: yes I know that. the external on this thing has four wires for the stock coil. new coil is in the cap and dunno which wires to run where
Title: Re: accord help
Post by: 88dx on December 17, 2009, 01:18:37 AM: Quote from: jdmhatchracer94 on December 17, 2009, 01:12:01 AM
yes I know that. the external on this thing has four wires for the stock coil. new coil is in the cap and dunno which wires to run where
Dose the original dizzy not bolt up to the new motor? ive used a obd2 dizzy on a obd1 car before and im pretty sure the wire colors were the same.
Title: Re: accord help
Post by: chris on December 17, 2009, 01:19:00 AM: Does one bolt up on the the original dist on the new motor? if the rest are close open the holes on the dizzy and use some washers

done.
Title: Re: accord help
Post by: DRQPQUT on December 17, 2009, 01:19:57 AM: if im not mistaken on the external coil there is 4 wires 2of wich are positive and 2wich are negative you should be able to read them with a volt meter???
Title: Re: accord help
Post by: jdmhatchracer94 on December 17, 2009, 01:21:45 AM: thats what i said the original dizzy bolts right up no problem but this kid wants the jdm dizzy cause the of some shit thats different i guess. What would u do?
Title: Re: accord help
Post by: chris on December 17, 2009, 01:24:49 AM: the easiest option
Title: Re: accord help
Post by: Phate on December 17, 2009, 01:30:12 AM: Quote from: jdmhatchracer94 on December 17, 2009, 01:21:45 AM
this kid wants the jdm dizzy cause the of some shit thats different i guess. What would u do?

Find something to strike him with. When I do my F23 swap, I'm gonna be a lazy motherfucker. The first few months its gonna be in the car, its gonna be running a non-vtec F22 ECU.
Title: Re: accord help
Post by: 88dx on December 17, 2009, 01:42:26 AM: Quote from: jdmhatchracer94 on December 17, 2009, 01:21:45 AM
thats what i said the original dizzy bolts right up no problem but this kid wants the jdm dizzy cause the of some shit thats different i guess. What would u do?
Tell him hes a dumbass and just bolt the dizzy on and plug it in.
Title: Re: accord help
Post by: chris on December 17, 2009, 01:45:53 AM: Word!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

If he wants the jdm stuff on, it costs more since its more work. See if he likes that answer.
Title: Re: accord help
Post by: Towdogg on December 17, 2009, 06:21:15 PM: Id say make his car run then shove the JDM dizzy up his ass.....
Title: Re: accord help
Post by: Joseph Davis on December 17, 2009, 07:14:16 PM: I say ask Spiker, he cares about Accords.
Title: Re: accord help
Post by: jdmhatchracer94 on December 18, 2009, 02:39:29 AM: now I put the f22 dizzy on and the fuckin thing is only getting spark on two cylinders wtf i hate this car
Title: Re: I fucking hate this accord HELP
Post by: jdmhatchracer94 on December 21, 2009, 09:35:57 PM: WTF piece of shit
Title: Re: I fucking hate this accord HELP
Post by: Lowerit on December 22, 2009, 05:47:34 PM: stop flying blind , download a manual

www.hondahookup.com (http://)