:::RHMT::: Real Home Made Turbo
General Category => Engine Management => Topic started by: clwtwizted on January 02, 2010, 09:37:18 PM
-
I just got a zdyne ecu 1 wire vtec with a purchase of a b16 head. Can I take out the stock 28 pin eprom and socket and chip and run turbo edit or Bre? Will I be able to change the vtec point If I can use Te or Bre?
-
I just got a zdyne ecu 1 wire vtec with a purchase of a b16 head. Can I take out the stock 28 pin eprom and socket and chip and run turbo edit or Bre? Will I be able to change the vtec point If I can use Te or Bre?
Wednesday.
-
zdyne is the shitz. expeciall with their hf ecu capabilities......
i would use the zdyne nigga
-
I just got a zdyne ecu 1 wire vtec with a purchase of a b16 head. Can I take out the stock 28 pin eprom and socket and chip and run turbo edit or Bre? Will I be able to change the vtec point If I can use Te or Bre?
you can do all of that with a 90-91 PM6 ecu.
you got ripped off home slice.
-
I just got a zdyne ecu 1 wire vtec with a purchase of a b16 head. Can I take out the stock 28 pin eprom and socket and chip and run turbo edit or Bre? Will I be able to change the vtec point If I can use Te or Bre?
Staying obd0 assumes you have an mpfi setup. That assumes you can use the pm6 ecu with TE or BRE. That infers that you can sell the zydine to another n00b that thinks a name brand > stock ecu.
Stay wednesday my friend...
-
I didnt buy the stuff for the ecu. i bought the head and the guy gave it to me. Im rocking a chipped pm6 in my crx right now, I just wasnt finding any info on the ecu and didnt know if was worth messing with. With the info I now know I will just pass it on and keep my pm6.
-
Zdyne modifies not just the ROM, but the RAM chip right below it so you can flash. I think read/write lines are also cut.
I'd rock the Zdyne. Very cool period piece, and stable.
-
I love zdyne
-
I love zdyne
I'd rather use Zdyne then turboEdit.
-
i have a Zdyne for sale PM for details its PM6 Gold SECU
-
I love zdyne
I'd rather use Zdyne then turboEdit.
I'd rather run obd1 than either of those.
i have a Zdyne for sale PM for details its PM6 Gold SECU
lol, did you read ANY of this threaD?
-
I love zdyne
I'd rather use Zdyne then turboEdit.
I'd rather run obd1 than either of those.
i have a Zdyne for sale PM for details its PM6 Gold SECU
lol, did you read ANY of this threaD?
I'm saying if I had a case of a guy who has a zdyne ecu and no conversion harness.
-
I love zdyne
I'd rather use Zdyne then turboEdit.
I'd rather run obd1 than either of those.
i have a Zdyne for sale PM for details its PM6 Gold SECU
lol, did you read ANY of this threaD?
haha nope
-
Typical.
-
i have a Zdyne for sale PM for details its PM6 Gold SECU
trade for set of d series oczc rods
-
So is it the same shit as TE one wire vtec? Does it use the ac out or does it use the pins for the pr3 vtec?
-
its nothing like te. zdyne is uber stable and no chip burning yo!!!!!!!!!!!!!!
-
http://zdyne.com/ (http://zdyne.com/)
Play around with the real time flashable Zdyne before you do yourself the disservice of consuming large amounts of time chip burning with TE/BRE.
-
LOL FLOPPY
That is all. /
it works
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.cs.nott.ac.uk%2F%7Eef%2FComputerXHistory%2FPeripherals%2F1981-Floppy-5inch-1212.jpg&hash=9338be3ca081dc93475d1c44ac52b02274c5e15a)