:::RHMT::: Real Home Made Turbo
General Category => Forced Induction => Topic started by: Jorsher on May 06, 2010, 10:20:42 PM
-
This is not for immediate purchase and will be at least a month before I'm actively searching for one, but turdbo manifolds...
I'd *really* like to have AC AND turbo, but I'm not sure how possible that would be in the CRX without being a complete pain in the ass.
I plan to use a T3/T04e .60 with a stage 5 turbine as suggested by the grand master wizard of the internets.
I'd prefer equal length as I ASSume it would be less wear on the turbo (probably not enough to matter) and spool better if the "pulses" reached the turbine in a steady beat...
Obviously I'd also need a downpipe, and possibly 3" exhaust while I'm at it...
Who can make it? How much should I expect to pay? B-series, BTW.
CRX or OCZC?
-
LOG or a splog
-
top log?
-
Log if you want to retain A/C
-
PM Buk. :yes:
-
PM Buk. :yes:
-
PM Buk. :yes:
-
PM Buk. :yes:
-
PM Buk. :yes:
Or you wait until you find a good deal on rhmt. Like a ramhorn at 350$ :-X
-
This is not for immediate purchase and will be at least a month before I'm actively searching for one, but turdbo manifolds...
I'd *really* like to have AC AND turbo, but I'm not sure how possible that would be in the CRX without being a complete pain in the ass.
I plan to use a T3/T04e .60 with a stage 5 turbine as suggested by the grand master wizard of the internets.
I'd prefer equal length as I ASSume it would be less wear on the turbo (probably not enough to matter) and spool better if the "pulses" reached the turbine in a steady beat...
Obviously I'd also need a downpipe, and possibly 3" exhaust while I'm at it...
Who can make it? How much should I expect to pay? B-series, BTW.
CRX or OCZC?
Dude you have almost 8k post and yet you dont know that equal is a bunch of BS for the most part. CSaddict or Corey can make what ever you need.
-
$60 ebay cast mani. The outer cylinders and inner cylinders are equal length :-*
-
$60 ebay cast mani. The outer cylinders and inner cylinders are equal length :-*
you gonna port/clean it for me?
and fuck you crxvtec91 :P seems obvious it would work better
I tried buk, but the one I got had extra holes ??? I couldn't figure it out
-
external wastegates.
-
I will tell you a/c and b series in a crx is not very easy and i have only seen 2 setup's that had a/c in years. So unless you want to spend a fuck ton for some guy to install and remove the parts 50 times to line everything up for fitment it's not happening.
Also if you want a decent manifold look into the quick-4 style manifolds. there compact and will make plenty of power.
Oh and equal length and shit is stupid. /thread
-
Buk makes all my manifolds for me now, I just charge $20 more and have him drop ship them.
-
http://www.ccfab.com/ (http://www.ccfab.com/)
-
Buk makes all my manifolds for me now, I just charge $20 more and have him drop ship them.
I only wish, have you seen those welds lately?
-
sinktrap ftw O0