:::RHMT::: Real Home Made Turbo
General Category => Fabrication => Topic started by: Lowerit on April 13, 2009, 09:01:35 AM
-
Pretty basic mod. Enjoy...
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi31.photobucket.com%2Falbums%2Fc379%2FJmccreery%2FP4100544.jpg&hash=d5f5c6c85f11818e16cb7f38f72807b3bee9d3e8)
Riding around like a toolshed with bouncy suspension is not cool. The car I am building will be running Koni's and coilovers (GC"s) poly...ect.. Primary use will be autocross and track events
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi31.photobucket.com%2Falbums%2Fc379%2FJmccreery%2FP4110550.jpg&hash=40c83fe7baeb07fcf176d9138a6b7391b181f697)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi31.photobucket.com%2Falbums%2Fc379%2FJmccreery%2FP4110562.jpg&hash=fa5d2d8e436e28ee280b5036eef2b11aff0ec0b8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi31.photobucket.com%2Falbums%2Fc379%2FJmccreery%2FP4110551.jpg&hash=daea5bf77825572027ae5ed515b497bae5df4d17)
Cutting 1" piece of pipe
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi31.photobucket.com%2Falbums%2Fc379%2FJmccreery%2FP4110571.jpg&hash=11bd2076921639a2ff9ff90cb4a123e78af37a6b)
Welded, ready for finishing
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi31.photobucket.com%2Falbums%2Fc379%2FJmccreery%2FP4110555.jpg&hash=e5621a15f81b64e3b91854217b471b11c84b3400)
Belt sanding (gotta make it pretty for Powdercoating)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi31.photobucket.com%2Falbums%2Fc379%2FJmccreery%2FP4110558.jpg&hash=119eb756c7d05bd7ea8091776d7fbf71699270d6)
Comparison of stock vs extended
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi31.photobucket.com%2Falbums%2Fc379%2FJmccreery%2FP4110561.jpg&hash=980644b11a438d46dadfd4c1599e33af14c8fc39)
2 done , 2 to go
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi31.photobucket.com%2Falbums%2Fc379%2FJmccreery%2FP4110574.jpg&hash=e9df04f8fa6a060ad313547b769112e48b8fed6d)
Next up rear suspension limiters
-
interresting ;D
Curious on rear limiters ;D
-
I am just copying a design on the rear limiters that JD came up with. I had the thread saved from the old site, but it's long gone. Basically use old bump stops and threaded rod. I am going to built them this weekend.
Ground control sells strut hat extenders for $200, They have speherical bearings in them which is nice, but at $200? I can spend it better elsewhere. (hoosiers)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.ground-control-store.com%2Fimages%2Ffullsize%2FHondaMount-RACE_fs.jpg&hash=80f99b42119b4961eb5aedae7faf49beb45ba6e4)
-
I am just copying a design on the rear limiters that JD came up with. I had the thread saved from the old site, but it's long gone. Basically use old bump stops and threaded rod.
I never said threaded rod. Threaded rod is expensive. I said cut and weld old shock shafts.
-
I am taking the info from an old HMT thread that wasn't yours , but the author gave you credit.
I will try using old shock shafts. I was going to use cut up old strut hats for the bushing cup's so that the bump stops had somewhere to fit inside.
I need to be able to disconnect these fairly easily.
-
Who was the author?
-
It's actually sitting on the hood of my corvair which slopes. They are dead level... I know..I used a level :)