:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: crazyassbill on November 28, 2011, 10:55:09 PM

Title: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 10:55:09 PM
well i'm back again bitches. Porn for u fucks
(http://29.media.tumblr.com/XjUpY4QN1mann8ckexaxXP71o1_500.jpg)
(http://www.ineedaredhead.com/wp-content/uploads/2010/03/lesbianredheads.jpg)
(http://www.smutmodels.com/pics/redhead-lesbians-betty-saint-and-crystal-crown-in-heat/31179-original.jpg?1274352764)
 had a slick blow out in a race at 140....wiped out the nose of the ef
 and found a fucked up frame damage that the previous owner had hid by using a da integra upper control arm and pulling the fender in to match the shoved in door post.
 

rip hatchie (http://img.photobucket.com/albums/v77/shredder130/IMG_0232.jpg)

(http://img.photobucket.com/albums/v77/shredder130/IMG_0231.jpg)

(http://img.photobucket.com/albums/v77/shredder130/IMG_0230.jpg)

ive decided this time that i want something fast and clean as fuck
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 10:59:00 PM
i stripped my grey hatch after a slick blow out  and put it all in a rust free shell that i repainted and restored from ground up.

(http://img.photobucket.com/albums/v77/shredder130/IMG_0583.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0584.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0332.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0326.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0331.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0329.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0437.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0497.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0496.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0525.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:06:27 PM
i bought two teal civics from florida, on was totaled in the front. yanked the good parts, stripped the good one and got started. i basically combined the three cars into on nice one.
loading shell bringing it to shop
(http://img.photobucket.com/albums/v77/shredder130/new%20civic/IMG_0299.jpg)
(http://img.photobucket.com/albums/v77/shredder130/new%20civic/IMG_0300.jpg)

 after i got it to the shop i yanked the dpfi engine and auto tranny out and stripped the interior.

(http://img.photobucket.com/albums/v77/shredder130/new%20civic/IMG_0303.jpg)
(http://img.photobucket.com/albums/v77/shredder130/new%20civic/IMG_0302.jpg)
i also pulled the whole body harness out to transfer my old mpfi obd1 converted one in.
Title: Re: rip ef hatch, time for a new one
Post by: 92CXyD on November 28, 2011, 11:07:10 PM
http://www.realhomemadeturbo.com/forum/index.php/topic,25.0.html (http://www.realhomemadeturbo.com/forum/index.php/topic,25.0.html)

http://www.realhomemadeturbo.com/forum/index.php/topic,14535.0.html (http://www.realhomemadeturbo.com/forum/index.php/topic,14535.0.html)

Follow example or be Wednesday' love child, anally with a hammer.  :noel:
Title: Re: rip ef hatch, time for a new one
Post by: Joseph Davis on November 28, 2011, 11:07:47 PM
You live in a dump.  Manifest some pride and pick up the fucking trash.
Title: Re: rip ef hatch, time for a new one
Post by: ratcityrex on November 28, 2011, 11:08:19 PM
Eye spy with my little eye............Holset
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:09:34 PM
wtf are you talking about thats not where i live lol
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:11:28 PM
the shitty yard is my moms house on thanksgiving when i visited, my brother lives there and hes a lazy fuck
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:13:34 PM
anywho back to the build

nothing like starting with straight rust free quarter panels
(http://img.photobucket.com/albums/v77/shredder130/new%20civic/IMG_0301.jpg)

i then started test fitting body parts,

(http://img.photobucket.com/albums/v77/shredder130/new%20civic/IMG_0304.jpg)
(http://img.photobucket.com/albums/v77/shredder130/new%20civic/IMG_0305.jpg)
(http://img.photobucket.com/albums/v77/shredder130/new%20civic/IMG_0306.jpg)

grabbed a torch and installed blox rear control arms.

(http://img.photobucket.com/albums/v77/shredder130/new%20civic/Picture003.jpg)
(http://img.photobucket.com/albums/v77/shredder130/new%20civic/Picture002.jpg)

this is how it looked as i rolled it in and out of the shop to work on it in the evenings

(http://img.photobucket.com/albums/v77/shredder130/new%20civic/Picture004.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: Joseph Davis on November 28, 2011, 11:14:09 PM
Okay, you live at the other place where the lawn hasn't been mowed in five years.  Post some fucking porn, n00b.
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:15:05 PM
i then started the engine and suspension swap
(http://img.photobucket.com/albums/v77/shredder130/IMG_0345.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0347.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0348.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0349.jpg)

built poor mans type r, precision 780s, holset turbo on 15 psi, 4 inch open downpipe
skunk2 coil over sleeves, rear drag springs, innovative competition traction bars

i then started on the interior, redyed doorpanels, carpet, and all interior trim black. wrapped headliner in teal plaid, si rear seat, my front si seats were haggard so i picked up some mint clean crx si seats on craigs list, welded up some brackets and mounted em
(http://img.photobucket.com/albums/v77/shredder130/IMG_0490.jpg).

i mocked the rest of the body together and just wasn't satisfied with the original paint.

(http://img.photobucket.com/albums/v77/shredder130/IMG_0355.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0353.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0354.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:16:06 PM
my friends dad had bought a brand new hood for his sedan on craigslist. needless to say he got hosed and it was a hatch hood. since he had no use for it, he sold it to me for 40 bucks.

i laid some high build primer on it ,the fenders, and front filler panel after working some dents.

(http://img.photobucket.com/albums/v77/shredder130/IMG_0383.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0384.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0382.jpg)

i cut the front bumper for the intercooler and fixed alot of gouges and chips.

(http://img.photobucket.com/albums/v77/shredder130/IMG_0386.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0389.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0388.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0387.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:16:43 PM
i then block sanded,reprimed,  wetsanded, sealed and finally painted the front end.

(http://img.photobucket.com/albums/v77/shredder130/IMG_0403.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0402.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0401.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0400.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0399.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0397.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0396.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: Joseph Davis on November 28, 2011, 11:16:58 PM
Transexual teal is definitely your color.
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:17:27 PM
i moved onto the body next, same process just repeated

(http://img.photobucket.com/albums/v77/shredder130/IMG_0409.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0410.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0411.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0412.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0413.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0414.jpg)

here it is reprimed and wetsanded

(http://img.photobucket.com/albums/v77/shredder130/IMG_0418.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0419.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0420.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0421.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:18:15 PM
then i laid the paint on

(http://img.photobucket.com/albums/v77/shredder130/IMG_0423.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0424.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0425.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0430.jpg)
intercooler and front end mock up

(http://img.photobucket.com/albums/v77/shredder130/IMG_0429.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:18:49 PM
then i was thinking to my self man this paint makes it look like sh*t under the hood so i painted it.
scuffed and prepped
(http://img.photobucket.com/albums/v77/shredder130/IMG_0431.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0432.jpg)

based and cleared
(http://img.photobucket.com/albums/v77/shredder130/IMG_0434.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0435.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0436.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0437.jpg)

re installed front end
 
(http://img.photobucket.com/albums/v77/shredder130/IMG_0449.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0450.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:19:24 PM
started fabbing a custom dump tube.
(http://img.photobucket.com/albums/v77/shredder130/IMG_0478.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0477.jpg)

then fabbed my own catch can because i have more time than money lol

(http://img.photobucket.com/albums/v77/shredder130/IMG_0523.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0516.jpg)

here it is mocked up

(http://img.photobucket.com/albums/v77/shredder130/IMG_0525.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0526.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:20:15 PM
i found a rock stuck in the timing belt from the slick blow out. so i installed a gates racing timing belt
(http://img.photobucket.com/albums/v77/shredder130/IMG_0540.jpg)

i drove it home and snapped some pics of it in the sun
(http://img.photobucket.com/albums/v77/shredder130/IMG_0541.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0543.jpg)
(http://img.photobucket.com/albums/v77/shredder130/IMG_0542.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: Joseph Davis on November 28, 2011, 11:20:29 PM
So you didn't brace anything when you had the fenders off?  Is this your first ED chassis?
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:20:49 PM
3 weeks ago my wife ordered me full machined drag dr27 for me as an early christmas present. on monday this week they finally came in and on tuesday i had tires mounted on em. wednesday i put em on

couple cell phone pics from that night

(http://img.photobucket.com/albums/v77/shredder130/photo-2.jpg)
(http://img.photobucket.com/albums/v77/shredder130/photo-3.jpg)

last night i just installed a victor x and a s2000 throttlebody

(http://img.photobucket.com/albums/v77/shredder130/IMG_0592.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:21:56 PM
ill post porn later tonight when i'm not on a work computer
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:23:46 PM
So you didn't brace anything when you had the fenders off?  Is this your first ED chassis?

no but i've thought about it
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:26:49 PM
red heads it is then
 ;DDD
Title: Re: rip ef hatch, time for a new one
Post by: 92CXyD on November 28, 2011, 11:28:56 PM
red heads it is then
 ;DDD

ASAP, b/c some mods are like Spiker after seeing blood while plucking a cheery from 18 yr old, and starts ramming it harder.  :noel:
Title: Re: rip ef hatch, time for a new one
Post by: snm95ls on November 28, 2011, 11:50:55 PM
Blurry pics are pissing me off.

 >:(

Man I want a fresh coat of paint on my shitbox.

I dislike the monochrome paint scheme.

That looks like Tahitian Green, so I just might approve.

Your pronz content needs some work, but you get a couple of brownie points for posting redheads.

Fucking gingers.  It must be because they have no soul that we (some of us) like them.

Wait, is it wrong to call an attractive(fuckable) redhead female a ginger?


Title: Re: rip ef hatch, time for a new one
Post by: 92CXyD on November 28, 2011, 11:56:51 PM

Wait, is it wrong to call an attractive(fuckable) redhead female a ginger?

(http://28.media.tumblr.com/tumblr_l7gg6sjq9h1qzx683o1_500.jpg)

It is very wrong, Gingers are male redheads or carpenter's dream of redheads.

Flat as board, easy to nail.  :noel:
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 28, 2011, 11:58:22 PM
Yes is  bg-28p tahitian green pearl
Title: Re: rip ef hatch, time for a new one
Post by: snm95ls on November 29, 2011, 12:00:29 AM

Wait, is it wrong to call an attractive(fuckable) redhead female a ginger?

It is very wrong, Gingers are male redheads or carpenter's dream of redheads.

Flat as board, easy to nail.  :noel:

Noted.

Yes is  bg-28p tahitian green pearl

Even though teal is a transexual color, as the Grand Wizard stated earlier, at least you used an OEM color.
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 29, 2011, 12:08:07 AM
I tossed in a couple gallons on Sunoco 100 tonight and raised the boost to 17psi. Timing is still low 15 degrees and it's rich as fuck, low 10s afr
Title: Re: rip ef hatch, time for a new one
Post by: Joseph Davis on November 29, 2011, 12:22:08 AM
You don't get it, do you?
Title: Re: rip ef hatch, time for a new one
Post by: snm95ls on November 29, 2011, 12:24:14 AM

Wait, is it wrong to call an attractive(fuckable) redhead female a ginger?

(http://28.media.tumblr.com/tumblr_l7gg6sjq9h1qzx683o1_500.jpg)

(http://www.atfmb.com/wp-content/uploads/2009/10/knowing-is-half-the-battle.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 29, 2011, 12:28:09 AM
You don't get it, do you?

Get what?
Title: Re: rip ef hatch, time for a new one
Post by: HiProfile on November 29, 2011, 02:25:44 AM
I say better than purple. Or bluedash.

He's posted porn, self-fabbed DP/dump, has holset. So far he's done better than some of the older members.
Title: Re: rip ef hatch, time for a new one
Post by: turbohf on November 29, 2011, 02:55:15 AM
body colored moldings bother the shit out of me...
Title: Re: rip ef hatch, time for a new one
Post by: bense on November 29, 2011, 09:03:48 AM

BTW redheads are win some of our books here.  ;DDD

yayyyy for me!
Title: Re: rip ef hatch, time for a new one
Post by: crxvtec91 on November 29, 2011, 11:31:52 AM
Solid post so far, keep up the fab, any rippers?
Title: Re: rip ef hatch, time for a new one
Post by: Joseph Davis on November 29, 2011, 12:07:45 PM

BTW redheads are win some of our books here.  ;DDD

yayyyy for me!

Post porn, n00b.
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 29, 2011, 11:07:40 PM
Moar porn
(http://blog.welivetogether.com/files/2011/11/brett2-480.jpg)
(http://blog.welivetogether.com/files/2011/11/brett2-458.jpg)
(http://blog.welivetogether.com/files/2011/11/brett2-444.jpg)
(http://blog.welivetogether.com/hot-and-steamy-lesbian-sex-pictures/brett2-395/)
(http://blog.welivetogether.com/files/2011/11/brett2-332.jpg)
Title: Re: rip ef hatch, time for a new one
Post by: ratcityrex on November 29, 2011, 11:54:45 PM
Nice!
Title: Re: rip ef hatch, time for a new one
Post by: Towdogg on November 30, 2011, 12:05:16 AM
I say better than purple.

Fuck You...

body colored moldings bother the shit out of me...

+1
Title: Re: rip ef hatch, time for a new one
Post by: crazyassbill on November 30, 2011, 02:24:08 PM
Turned boost down to 15.5 and timing up a little, according to datalog it is 17.25-18.50 on full boost
It's running great. Not gonna up the boost again til my water meth is installed
Title: Re: rip ef hatch, time for a new one
Post by: crxvtec91 on December 01, 2011, 02:11:08 AM
Turned boost down to 15.5 and timing up a little, according to datalog it is 17.25-18.50 on full boost
It's running great. Not gonna up the boost again til my water meth is installed

piss injection> water meth as JD