:::RHMT::: Real Home Made Turbo
General Category => Fabrication => Topic started by: jeremy_nash on November 30, 2011, 11:28:45 PM
-
Would this metal be ok to make my flanges from? I don't wanna end up with the shit powdering on me.
http://www.onlinemetals.com/merchant.cfm?pid=10062&step=4&showunits=inches&id=802&top_cat=849 (http://www.onlinemetals.com/merchant.cfm?pid=10062&step=4&showunits=inches&id=802&top_cat=849)
-
or does anybody have any 3/8" plate? need 3" x 16"
-
R u looking for a exhaust manifold flange? What head flange?
-
I'm just wanting the metal to make my own, as I cant find any for my engine. suzuki g10 3 cylinder.
plus I'm cheap as fuck! :Jew:
-
I'm just wanting the metal to make my own, as I cant find any for my engine. suzuki g10 3 cylinder.
plus I'm cheap as fuck! :Jew:
Hit up weir and see what he's got, or can make
-
I just wanna do it myself, will that metal I posted be worth a shit?
-
Fuck if I know
-
If it is 1/2 steel, then yeah it will work. :noel:
-
no one on teamswift makes flanges? wasnt there that company out of canada or some shit? i thought turbo geos were cool at one time till i realized the 3cyl whp record is like 200
-
Just go by your local steel yard and ask to go through their plate and flat bar drops. Piece big enough to make a header flange will cost you maybe 10 bucks in 1/2 inch steel plate.
-
Just go by your local steel yard and ask to go through their plate and flat bar drops. Piece big enough to make a header flange will cost you maybe 10 bucks in 1/2 inch steel plate.
Sound advice!
all my local yards were a bunch of douchebags! finally ended up with some though