:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: g_shok on March 08, 2009, 01:37:16 PM

Title: The Cold Canadian Build [56k<Oc] *Rick is a Dick*
Post by: g_shok on March 08, 2009, 01:37:16 PM
...My shit stays with me
WINNER OF THE HMT WRITE UP CONTEST
(http://img514.imageshack.us/img514/7049/img2472vv4.jpg)


engine is jdm sir 2nd gen with a built bottom end
srp pistons
eagle rods
aebs im
12lbs fly
act clutch
lsd tranny

Turbo stuff:
fab favorite custom elephant topmount
t70 masterpower t4 flanged .68
Tial 38mm wastegate
Tial Bov
straight 3" exhaust front to back, mostly stainless steel
2.5" ic piping
TT 660cc inj
flowmaster super 40
egay intercooler

got this on a chipped and fix for vtak p06 runnin crome

Shoutouts below

all put together in house with mucho help from Ravage so big props to that child molester
also big help from the following nogs:
Stealthmode and the Wifey for a great guy and quality shit
MinorThreat for the chipping
jagojon for the couplers
Xeno for the chips
Weir for misc flanges
Tunertoys
and why not, to imburn also for some nice t-shirts

its begging for a good tune

what i started with
(http://img255.imageshack.us/img255/2008/p1010166bd0.jpg)
(http://img255.imageshack.us/img255/2263/p1010595px6.jpg)
(http://img255.imageshack.us/img255/5948/cimg0075mm0.jpg)
(http://img255.imageshack.us/img255/5048/1032470jt5.jpg)
(http://img255.imageshack.us/img255/2590/1032461sb3.jpg)

(http://img261.imageshack.us/img261/6091/img1116ja4.jpg) 
exhaust line straight pipe all stainless steel with the sexy sounding flowwwwwwmaster


(http://img261.imageshack.us/img261/3376/img0822cz4.jpg)
(http://img261.imageshack.us/img261/1600/img1194qk1.jpg)
Strealthmode's oil line kit for t4
(http://img261.imageshack.us/img261/7314/img0852ti8.jpg)

elephant top mount, big money saver
(http://img261.imageshack.us/img261/4836/img1165bk5.jpg)
(http://img261.imageshack.us/img261/7280/img1170al1.jpg)
(http://img261.imageshack.us/img261/1882/img1190gi6.jpg)

the good shit
(http://img261.imageshack.us/img261/6674/img1187de4.jpg)


do it yourself charge piping
(http://img261.imageshack.us/img261/162/img1192zo8.jpg)
(http://img261.imageshack.us/img261/3767/img1343hr3.jpg)
(http://img261.imageshack.us/img261/6034/img1171tc2.jpg)

i went a little baller with the vbands, oh well
(http://img261.imageshack.us/img261/8224/img1346jw5.jpg)
(http://img261.imageshack.us/img261/7598/img1352ru4.jpg)
(http://img261.imageshack.us/img261/8323/img1364dc1.jpg)


tapped pan
(http://img261.imageshack.us/img261/3706/img1356io3.jpg)
(http://img261.imageshack.us/img261/1716/img1358qg0.jpg)

DP
(http://img249.imageshack.us/img249/743/img1369cb2.jpg)

firewall oil line kit
(http://img249.imageshack.us/img249/5259/img1372ud4.jpg)
(http://img249.imageshack.us/img249/6383/img1379yh2.jpg)

gotts love stainless
(http://img249.imageshack.us/img249/1340/img1381kj0.jpg)

chipped p0o6 vtak'd by Minor Threat
(http://img95.imageshack.us/img95/8057/1002574bd8.jpg)
(http://img249.imageshack.us/img249/3416/img1385ia2.jpg)

finally took some pics after the bov installed and painted the piping, still need to heat wrap the mani
(http://img523.imageshack.us/img523/6980/img1690cl6.jpg)

Rick is a cock sucking faggot, is that edited enough for you ricky dicky  :-*
      
Title: Re: The Cold Canadian Build [56k<orange chiken] *updated 07/29/08*
Post by: 92CXyD on March 08, 2009, 04:58:36 PM
damn  I like that sink trap. ;D

That help answer one my questions about the routing and the wg placement. :noel:
Title: Re: The Cold Canadian Build [56k<orange chiken] *updated 07/29/08*
Post by: Travis on March 08, 2009, 05:18:37 PM
Not bad for someone from the East  :-*
Title: Re: The Cold Canadian Build [56k<orange chiken] *updated 07/29/08*
Post by: glustic on March 08, 2009, 06:08:32 PM
Sick setup man, diggin the manifold.
Title: Re: The Cold Canadian Build [56k<orange chiken] *updated 07/29/08*
Post by: dvst8r on March 08, 2009, 06:08:55 PM
Oh the sinktrap quite possibly one of rHMT's greatest gifts.
Title: Re: The Cold Canadian Build [56k<orange chiken] *updated 07/29/08*
Post by: snm95ls on March 09, 2009, 01:42:27 PM
I fucking love the sinktrap.

I love EK sedans too fro some odd reason.

Title: Re: The Cold Canadian Build [56k<orange chiken] *updated 07/29/08*
Post by: foumer on March 09, 2009, 03:15:03 PM
Nice build, but I would of welded a an fitting on the oil pan.  Dont trust that jbweld too much.
Title: Re: The Cold Canadian Build [56k<orange chiken] *updated 07/29/08*
Post by: g_shok on March 09, 2009, 07:22:46 PM
Nice build, but I would of welded a an fitting on the oil pan.  Dont trust that jbweld too much.

trust jb weld wit yo life son....jooo
Title: Re: The Cold Canadian Build [56k<orange chiken] *updated 07/29/08*
Post by: Teg2boo on March 18, 2009, 12:39:57 AM
Did you make any video of it?

Title: Re: The Cold Canadian Build [56k<orange chiken] *updated 07/29/08*
Post by: TRC on March 18, 2009, 12:50:14 AM
 Man, I love the mani!!! :yes: