:::RHMT::: Real Home Made Turbo

General Category => Fabrication => Topic started by: JohnHandcock on January 14, 2013, 08:36:49 PM

Title: manifold supplies
Post by: JohnHandcock on January 14, 2013, 08:36:49 PM

Looking for place on nog price 1.25" or 1.5"  sch 10 pipe mild steel or 304 SS.
Also need bunch -10 or -12 AN fittings in aluminum.  O0

Title: Re: manifold supplies
Post by: PhilStubbs on January 14, 2013, 11:01:47 PM

I get mine from ace stainless

Title: Re: manifold supplies
Post by: carkrazed on January 16, 2013, 10:46:50 PM

Quote from: PhilStubbs on January 14, 2013, 11:01:47 PM

I get mine from ace stainless

Title: Re: manifold supplies
Post by: 92CXyD on January 16, 2013, 11:36:02 PM

Got mine from Weir  :noel:

And parts of exhaust from mandrel-bends  :noel:

Title: Re: manifold supplies
Post by: JohnHandcock on February 03, 2013, 12:59:38 AM

Tried order from ta chen but I'm not a company since the are a master distributor. I'm check out ace stainless see if I can get it for nog price.

Title: Re: manifold supplies
Post by: NoPistons! on February 03, 2013, 03:53:46 PM

cheapest i seem to find -an fittings for anywhere is $8-14 depending on size, * angle/swivel, push lock or standard, etc.... 

Noglit prices on those items usually come when someone has an overstock for whatever reason.   SOme places (i'm not in liberty to say where, even in pm) cut you 50 percent when you do bulk orders.  Between 15-50 pieces usually. Locally i can get them in mild sched 10 for $8ish after taxes per bend/piece which isn't bad.   



consider contacting mazworx.  They do quite a bit of work.  Custom fabrication being one of them.

Title: Re: manifold supplies
Post by: ratcityrex on February 03, 2013, 04:18:05 PM

ebay on the an fittings, one guy i use to order from, i would get -10 90* swivel fittings for like $7 shipped.

Title: Re: manifold supplies
Post by: crxvtec91 on February 07, 2013, 11:44:29 AM

I use summit brand an with good luck!

Title: Re: manifold supplies
Post by: jabberwock on February 07, 2013, 05:24:01 PM

Could also check columbia rivers b stock list for nog prices

Title: Re: manifold supplies
Post by: JohnHandcock on February 11, 2013, 08:11:38 PM

Quote from: NoPistons! on February 03, 2013, 03:53:46 PM

cheapest i seem to find -an fittings for anywhere is $8-14 depending on size, * angle/swivel, push lock or standard, etc.... 

Noglit prices on those items usually come when someone has an overstock for whatever reason.   SOme places (i'm not in liberty to say where, even in pm) cut you 50 percent when you do bulk orders.  Between 15-50 pieces usually. Locally i can get them in mild sched 10 for $8ish after taxes per bend/piece which isn't bad.   



consider contacting mazworx.  They do quite a bit of work.  Custom fabrication being one of them.

Hook it up :Jew:


Did some research on the fittings. JIC and AN are supposedly similar but  JIC are for hydraulic lines and AN(army/aerospace navy)  are for aerospace stuff.

Also did some searching and found some steel fittings for 3-4$. Just search for rail fittings they come in 1.25 and 1.5 sch40 couldnt find any sch10.

I signed up for the CRMB bstock email listing. O0

Title: Re: manifold supplies
Post by: weirtech on February 13, 2013, 07:33:07 PM

i sell all this shit.  my prices should be in line with ace.  the an fittings are vibrant, but i provide rhmt pricing.

Title: Re: manifold supplies
Post by: JohnHandcock on February 19, 2013, 02:48:45 PM

You have pm weir

Title: Re: manifold supplies
Post by: JohnHandcock on May 27, 2013, 04:01:00 PM

Where the nog deals at? O0