:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: 2slow on October 31, 2014, 10:27:11 PM

Title: F20B in 4th Gen Prelude.
Post by: 2slow on October 31, 2014, 10:27:11 PM
Whats up niggroids, been a while since ive been on here.
I haven't turbod shit in years. Any ways, I have a 92 prelude Si with a Dohc Vtec F20B. I got the car with the swap a couple of years ago. Now my drivers side engine mount bracket had a stud sheered off. I need the correct engine mount and bracket that bolts to the block. Does anyone know which bracket and mount i need?
Title: Re: F20B in 4th Gen Prelude.
Post by: HiProfile on November 03, 2014, 10:04:47 PM
It should have the same bolt pattern as an H22. The original F20B and H23A brackets were basically H22 brackets that bolted to Accord mounts. The prelude (h22) mount has a much wider spacing between the top bolts vs an accord (f22) mount, google it or search on ebay for pics. Ebay is surprisingly good for finding pics to help ID a part. Rockauto is good for most items, too.

If it's just the stud that faces upwards, just drill it out and toss in a 7/16" bolt. $3 worth of grade 8 stuff at a decent hardware store.