:::RHMT::: Real Home Made Turbo
General Category => Forced Induction => Topic started by: Joseph Davis on June 27, 2009, 04:49:41 PM
-
(http://i256.photobucket.com/albums/hh166/joeymisanthropy/Tuner/red%20car/one.jpg)
-
where do find such clean bodied ef's? those things are like fucking hen's teeth out here.
-
What's your lot rent? Looks like a cramped space for you and the daughter unit to share... Are you planning an addition in this build thread?
-
The race is on Stealth Shuttle vs JD's Apartment.
-
Ok, but seriously, I am assuming this is going to be the LS build, but is it going to see boost this time? Or is it going to be another gas miser?
-
where do find such clean bodied ef's? those things are like fucking hen's teeth out here.
I own 3 of them
-
where do find such clean bodied ef's? those things are like fucking hen's teeth out here.
You can't find them here, either. I, sir, have a very large penis and am not adverse to sleeping with ugly women to get what I want.
-
JD build thread? blasphemy!
-
where do find such clean bodied ef's? those things are like fucking hen's teeth out here.
You can't find them here, either. I, sir, have a very large penis and am not adverse to sleeping with ugly women to get what I want.
Me to ask Foowwee he can vouch. :noel:
-
about the ugly women? or the clean 2/4g's? btw I'm going to be selling a rust free 86si in the near future...
This car must have an ls, a hx35, and a 9 second timeslip... a cg tranny would be a nice touch too.
-
come over to the west coast i have 2 on my lot right now one with a poped headgasket you can have for 300.00$$$ i crush about 1 a week :'(
-
come over to the west coast i have 2 on my lot right now one with a poped headgasket you can have for 300.00$$$ i crush about 1 a week :'(
really? send me some pics :noel:
-
I smell a K series swap, full-race turbo kit complete with a ball bearing turbo :-*
-
I smell a K series swap, full-race turbo kit complete with a ball bearing turbo :-*
tuned on hondata :mexi:
-
I still have that Si Cluster U want.
all yours
-
The civic in the background looks like it's full rice..
-
The red one is not his, the blue one in the back round is :-*
-
(http://i256.photobucket.com/albums/hh166/joeymisanthropy/Tuner/red%20car/two.jpg)
-
Is that a traction bar I spy?
-
Fuck the traction bar, that's a Blundell Signature Series Action 2MD and Toda flywheel combo.
-
sweet car trailer
the pic quality sucks, cavemen did better
-
Shitty picture quality is my trademark. I wouldn't be repping the low buck way if I posted some 10 megapixel shit.
-
im in because im curious if this will actually turn into a machine or a failure.
-
Maybe the pics are all really old and he is just pretending like he is actually building something.
-
VC makes me believe LS.
-
looks like a ZC actually the Valve cover seems to have a ridge in it.
LS does not have a ridges
upon further evaluation 2 kinds obd2 obd1
(http://nightshiftmotorsports.com/mediac/400_0/media/CRX$20Valve$20cover$2010.jpg)
(http://i31.tinypic.com/2q0ldt0.jpg)
ZC
(http://img381.imageshack.us/img381/5197/pc100003eg5.jpg)
-
I want to say zc because of the timing belt cover but the aftermarket mount in the pic makes me want to say LS.
-
By the looks of the TB cover, I THINK its an LS. If it is a D, its a ZC, cus the VC on the A1 had some gay bolt pattern that put 4 bolts through the middle of it.
-
Maybe the pics are all really old and he is just pretending like he is actually building something.
(http://i256.photobucket.com/albums/hh166/joeymisanthropy/Tuner/red%20car/four.jpg)
-
b18a1
-
Maybe the pics are all really old and he is just pretending like he is actually building something.
would almost be able to call himself Dvst8r aka grandpa brett
ALMOST, but not quite
-
"Ain't got no parts from Toda..." Ever ask him where that flywheel came from?
-
From a good home, I suppose?
-
I know good things will be done in this thread, low buck/high power :noel:
-
went ahead and one starred
-
decent hatch.. this thing better be doing wheelies in 2 months
-
decent hatch.. this thing better be doing wheelies in 2 months
Fuck wheelies, it has to do barrel rolls.
-
(http://i256.photobucket.com/albums/hh166/joeymisanthropy/Tuner/red%20car/six.jpg)
-
your camera sucks, lol
-
It'snot a camera, it's a phone, but if I were to buy a camera it would only be because it took shitty pictures. I want you all to understand I have zero interest in making other men happy, ok?
-
But what shocks are they?
-
It'snot a camera, it's a phone, but if I were to buy a camera it would only be because it took shitty pictures. I want you all to understand I have zero interest in making other men happy, ok?
duly noted :mexi:
-
But what shocks are they?
Garbage.
-
Your pics look like they are back from the 90's from the scanned pic era. Tiiite
-
Fuck it was hot saturday. :mexi:
-
just had the alignment done i see
-
No, sir. Not yet. Goforth raped it for an upper control arm for the CRX a hot minute ago, so we had to install a new one to get it on the trailer. No big deal since I purchased UCAs, lower ball joints, tie rod ends, trailing arm bushings, etc a couple years ago. When I was installing a different transmission twice I couldn't get either lower ball joints to re-attach without spinning so I went ahead and installed the ball joints and the other UCA. I need to swap for the 9" drums (install the trailing arm bushings then) and CDM LCAs off the beater, and then I'll have it aligned.
-
those ground controls?
awesome pics, looks like the puerto rican that stole your camera dropped it before he sold it to you
-
Thanks, that's the sort of build I'm going for. :)
-
Thanks, that's the sort of build I'm going for. :)
i would expect nothing less from the grand wizard
finish it up and make good numbers and even better times
-
How about a fuzzy picture of the spiny boosty thing.
-
What?
-
What?
he wants a pic of the turbo
-
What?
he wants a pic of the turbo
He knew exactly what I wanted, he is just going out of his way to be vague. He has a thread about being exceptionally confusing and vague for a month or so...
-
(http://intertwingled.net/images/wat.jpg)
-
ok
-
I want to see PVC, a crappy 50 trim T3, JD AFC hack, log mani, and hard steel oil lines.
-
I upgraded the .50 to a .60, and you've forgotten the triple DSM SMIC, sir. Wow, I'm touched that you actually remember. I'll dedicate one of my more lucid photos to you, sir.
-
8) bout damn time
-
bump
-
I upgraded the .50 to a .60
I hope you're not talking about 'trim' numbers. That's my number one pet-peave, using that damn decimal in front of trim number. Hopefully you're talking about the cover, like those clueless ricers do.
BTW if you didn't want to make men happy, why do you post in every thread?? O0
-
BTW if you didn't want to make men happy, why do you post in every thread?? O0
I didn't know my posting made anyone happy.
-
I know my posting makes Chad happy in the pants.
:mexi:
-
:'(
-
(http://i256.photobucket.com/albums/hh166/joeymisanthropy/Tuner/red%20car/seven.jpg)
-
USE THE CLOTHESLINE.
You win 3 internets dan.
-
USE THE CLOTHESLINE.
You win 3 internets dan.
(http://www.realhomemadeturbo.com/forum/Smileys/classic/rolleyes.gif)
I didn't so much as look at it until the owner suggested it.
-
is that raw material for the exhaust manifold?
-
is that raw material for the exhaust manifold?
traction bar i thought
-
Actually JD just shoved the entire thing up his ass.
-
and liked it?
-
who the fuck owns a battery powered sawzall. :-X
-
actually they work reat and the battery lasts longer then you would think.
-
who the fuck owns a battery powered sawzall. :-X
$35 new, with warranty. It was "last year's" display model, they took all the Black & Decker tools off the wall of Homeboy Depot and replaced them with identical "this year's" tools, then sold the display models off for a fraction. It was the sort of thing I couldn't pass up.
-
^ the beginning of JD's junkyard roll cage :mexi:
-
Fuck You! Just for that I'm not sending back your Paypal money until Monday. Actually, I needed to buy a hot air SMD rework station and didn't have a chance to drop some checks in the bank yesterday, so you were screwed on the deal anyway... but now I have Justification!!!
-
Hey lets see some pics of the radiator set up ;)
-
The delivery level of this thread is low, but since he is from west Asheville and does not give a fuck, it is expected.
O0
-
who the fuck owns a battery powered sawzall. :-X
I have a 18 volt dewalt :P
-
dewalt is the only thing that pwns in battery powered tools.
-
dewalt is the only thing that pwns in battery powered tools.
Milwaukee makes pretty nice battery powered tools
-
Bang for the buck is a $35 Black & Decker.
-
Black n decker 12volt wired to a car battery and you can run all day on a single charge.
-
Actually JD just shoved the entire thing up his ass.
It was the sort of thing I couldn't pass up.
-
I think I saw something a while back about the company that makes the B&D cordless stuff made one of the "good" brands as well.
Can't remember what it was though.
-
vibrating dildoes.
-
dewalt is the only thing that pwns in battery powered tools.
there are a few good ones, Ive had good luck with all my dewalt shit so I stick with them.
-
dewalt is the only thing that pwns in battery powered tools.
there are a few good ones, Ive had good luck with all my dewalt shit so I stick with them.
c0mpl3x, how did you change your screenname to highroller54?
-
i had a B&D drill lock up a while back. I've had it for probably 9 years and it just needed a good cleaning and the bearings greased (with some spray white lithium). Runs like a champ now. The angle grinder I have from them is starting to get a catch in it. I can feel it when it get hot after some use. Had that sucker a long ass time too and i use it for way more shit than I should.
I'm with JD on this one. Best band for the buck: BandD
-
dewalt is the only thing that pwns in battery powered tools.
there are a few good ones, Ive had good luck with all my dewalt shit so I stick with them.
c0mpl3x, how did you change your screenname to highroller54?
play nice Mr. Davis :-*
-
Hey, you're the one with the played out avatar. :-\
-
Hey, you're the one with the played out avatar. :-\
fair enough :P
-
Can I get this utter garbage deleted from my build thread?
-
build thread? This build thread is worthless. You have a picture of a car on a trailer, a b something motor falling out of a car with the pressure plate painted pretty red color, a sazall you swear is great because it was $30 and came with a warranty and furthermore no vids.
so, can we get this thread deleted because it fails?
-
build thread? This build thread is worthless. You have a picture of a car on a trailer, a b something motor falling out of a car with the pressure plate painted pretty red color, a sazall you swear is great because it was $30 and came with a warranty and furthermore no vids.
so, can we get this thread deleted because it fails?
Jesus Fuckin Christ somebody left the pacific rim and turned into a raging dick. Look who created this thread you clicked the link and you should have found exactly what you expected.
-
build thread? This build thread is worthless. You have a picture of a car on a trailer, a b something motor falling out of a car with the pressure plate painted pretty red color, a sazall you swear is great because it was $30 and came with a warranty and furthermore no vids.
so, can we get this thread deleted because it fails?
I'm with you on all that, Frank, but when you point that out in comparison to Jon's pedobear shit it makes me want to tell you to get fucked. Pick the correct time and place for your arguments, this is not one of them. >:(
-
build thread? This build thread is worthless. You have a picture of a car on a trailer, a b something motor falling out of a car with the pressure plate painted pretty red color, a sazall you swear is great because it was $30 and came with a warranty and furthermore no vids.
so, can we get this thread deleted because it fails?
Well played sir.
-
Can I get this utter garbage deleted from my build thread?
Done :noel:
-
Can I get this utter garbage deleted from my build thread?
can this be considerd a build thread should be moved to GD. :yes:
-
build thread? This build thread is worthless. You have a picture of a car on a trailer, a b something motor falling out of a car with the pressure plate painted pretty red color, a sazall you swear is great because it was $30 and came with a warranty and furthermore no vids.
so, can we get this thread deleted because it fails?
Well played sir.
Thanks.
-
bump for updates
-
bump for updates
Spend less time on myspace, more time fixing your car. The wife is working tomorrow and im not picking that dsm up from Atlee's until monday, I can help if you need someone to stand there and drink beer while you work.
-
I was supposed to work on it yesterday, sat in front of the shop for an hour while no one showed up. No one will be there today, either.
There's not much to do without a welder, really. Although I'm probably sticking the stock LS drivetrain into the Si, it's staying in the STD until I've test fired it and made sure the wiring/etc's okay.
-
(http://i256.photobucket.com/albums/hh166/joeymisanthropy/Tuner/red%20car/eight.jpg)
(http://i256.photobucket.com/albums/hh166/joeymisanthropy/Tuner/red%20car/nine.jpg)
This shit is galvanized, holding my breath while welding fucking sucks.
-
dude are those the old school str swap mounts with the white steel and red inserts? i have the same... so basically i know everything just like you. YES
-
wow you can weld?
Better than you, I have pictures to prove it.
dude are those the old school str swap mounts with the white steel and red inserts? i have the same... so basically i know everything just like you. YES
HASport welded aluminum mounts, you don't see them anymore because the poly inners were prone to tearing out. These only have 30K on them so they are still in good shape, if the aluminum is somewhat oxidized. I have a set of HASport hydro mounts from the CRX sitting upstairs for my hydro trans conversion - FYI this drivetrain is going in my next beater.
-
Err. The rum and the cider is gone. All thats left is that nasty fucking romano licorice shit on top of the fridge. FUck.
-
it's staying in the STD until I've test fired it
STD's are good. :noel:
-
Err. The rum and the cider is gone. All thats left is that nasty fucking romano licorice shit on top of the fridge. FUck.
Stuart donated rum to our noble cause, sir. It is in the Dragon Wagon, I'll see you in 30.
-
Err. The rum and the cider is gone. All thats left is that nasty fucking romano licorice shit on top of the fridge. FUck.
Stuart donated rum to our noble cause, sir. It is in the Dragon Wagon, I'll see you in 30.
Eh, the wife went crazy and re-arranged the living room. Dont trip over the table when you walk in...
-
wow you can weld?
Better than you, I have pictures to prove it.
okay toysrme, prove it.
Wow thats low jon. Like fucking Guatemala low.
-
wow you can weld?
Better than you, I have pictures to prove it.
okay toysrme, prove it.
(http://www.realhomemadeturbo.com/forum/Smileys/classic/rolleyes.gif)
I didn't say I was a good welder, just better than you. :mexi:
-
where do find such clean bodied ef's? those things are like fucking hen's teeth out here.
Funniest part is JD's source of motivation for his build stems from the fact that he folded up his other perfectly good ED daily beater.
PS: let me know if you need a decent wrench turner at any point, you know i'm down for the cause.
-
Hasports are new school. I have a set of b series place racing crx mounts laying around still.
They could go through a nuclear war and still be in one piece. If you like feeling every rpm in your car they were great.
-
Hasports are new school. I have a set of b series place racing crx mounts laying around still.
I have the front mount that shipped with the Place Racing crossmember, it's still minty blue new. I'll take a picture of it for you.
-
Place racing was a cool spot Gil just didnt know how to run a business. Oh well he was in at the peak made his fortune and bailed just in time before the market was consumed with cheap knock offs and fast and furious movies.
-
Gil Garcia, haven't heard that name in ten years.
Here's the pic I promised, with love:
(http://i256.photobucket.com/albums/hh166/joeymisanthropy/Tuner/red%20car/chris.jpg)
-
Classic Ill have to dig around for the ones I have.
Gil was actually a pretty nice guy who was ahead of everyone but like most the 19 year old shit heads made him say fuck it. One of the pioneers who really opened up doing this stuff to everyone.
He did mislabel my conversion harness for my zc back in 1997 so Ill bad mouth him that he is a fraud. Drove up and helped fix the wiring errors he made what a dirtbag.
I bought a bunch of odds/ends he had maybe 5-6 years ago as he was clearing out the last of the honda stuff. He had tons of bitchin equipment for sale on the cheap but my broke ass cant afford stuff like that.
-
What's he doing these days?
-
http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback2&userid=gvgarcia&ftab=FeedbackAsSeller (http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback2&userid=gvgarcia&ftab=FeedbackAsSeller)
ebay account. He was selling lots of fittings couple years back. Most likely got a normal 9-5. Everyone in southern california knew Gil since he was also importing for awhile to so he had tons of stuff around his shop.
http://www.hondatuningmagazine.com/editorial/htup_0808_place_racing_honda_engine_swap_mounts/index.html (http://www.hondatuningmagazine.com/editorial/htup_0808_place_racing_honda_engine_swap_mounts/index.html)
-
Bump
-
(http://i256.photobucket.com/albums/hh166/joeymisanthropy/Tuner/red%20car/ten.jpg)
-
nice the clothes line was a worthy sacrifice
-
nice rad. i picked up what i thought was a scirocco rad when i was at waterfest last weekend but it turned out to be a few inches wider and wont fit behind my backdoor intercooler, must be some newer 1.8t rad. dayum i gots the eye of a tiger.
-
Ashville seems a lot like Silver Town. keep on keepin on man.
-
I thought I had a lot of stock in my car. I can barely see your passenger seat lol
I need a traction bar like that, stock crossmember is a bitch on Integra. Turbo hit it, downpipe hit it, etc.
I would like to have a rad like that too, mine is all rotten lol
-
My traction bar barely clears a 3" downpipe, I'm pretty sure it's no better than stock.
The radiator bar (what you see) supports my nifty $53 to the door radiator. O0
-
nice rad. i picked up what i thought was a scirocco rad when i was at waterfest last weekend but it turned out to be a few inches wider and wont fit behind my backdoor intercooler, must be some newer 1.8t rad. dayum i gots the eye of a tiger.
The one you got is for a automatic. Its 26" wide instead of 23"ish
Check my sig for a link to the right one
My traction bar barely clears a 3" downpipe, I'm pretty sure it's no better than stock.
The radiator bar (what you see) supports my nifty $53 to the door radiator. O0
Jd What turbo mani are you running on this beast to not have alot of room for a 3" dp?
-
I haven't made a manifold for it yet. The Jimfab traction bar leaves only 3.25-3.50" clearance between it and the lip of the oil pan.
-
I thought it was one of weir's traction bar kit.
-
Nope, just his towhook flanges. I already had the Jimfab, and I wanted something to protect the bottom of the radiator/IC/downpipe which the Jimfab isn't designed to do. Plus, a littl extra weight forward of the front wheels doesn't hurt a FWD turbo car (with a drag bias).
-
what are you thinking for manifold?
-
Do you have them all the way down? Whats your ground clearance like? Hope the radiator works out well for your setup too.
-
what are you thinking for manifold?
I want split scroll T67. But, seriously? A .60 trim T3/T04E would probably make me happy at this point. I really like this car and I overbuilt it... as it (my parts pile, anyway) sits it'll be a 600-700 whp piece of shit that disintegrates transmissions and I don't feel like pulling a trans 4-5 times a year to fix it. If it's a mild 450 whp car then it'll still run a mid 10 as well as have quick spool streetcar manners as well as a broad low boost powerband.
Do you have them all the way down? Whats your ground clearance like? Hope the radiator works out well for your setup too.
Yes, and the clearance looks good so far. I don't like slammed cars so what you see is about what I'll rock.
-
i just reskimmed the thread to see if i missed it, but what exactly is going in this car? i see the ls is destined for a beater? i have 2nd degree down syndrome in case you are wondering.
-
I doubt anything will make you happy.
-
i just reskimmed the thread to see if i missed it, but what exactly is going in this car? i see the ls is destined for a beater? i have 2nd degree down syndrome in case you are wondering.
No, you didn't miss it.
I doubt anything will make you happy.
No, nothing ever will, but standing in line behind you for a turn at your mom might make me grin wryly for a few minutes.
-
your thread needs more delivery.
-
your thread needs more delivery.
To the retirement home.
-
BAMP for MOAR progress
-
Bump because EP3's are a form of failure.
-
Not boosted yet? :P
-
Bump for a 700hp parts pile.
-
Bump because EP3's are a form of failure.
FUCK YOU
-
That isnt a cracked windshield that goes from corner to corner is it? If so, id hate to see under that valance thingy. :(
-
(http://twentytwomedia.net/wp/wp-content/uploads/2009/01/delivery.jpg)
-
Bump because EP3's are a form of failure.
GTFO!!
-
Bump because EP3's are a form of failure.
GTFO!!
Are you defending EP3's in my build thread?? Fuck you!
-
Bump because EP3's are a form of failure.
GTFO!!
...in my build thread??
Are you still building anything in this thread?
-
Every car in my driveway is slower because of JD's EP3. Bumpity.
-
How come this this isn't done yet???
This thread is 6 weeks of failure, O0
-
Bump because EP3's are a form of failure.
GTFO!!
...in my build thread??
Are you still building anything in this thread?
I sure am. I intentionally don't update shit - I'm not here to please anyone.
-
Bump because EP3's are a form of failure.
GTFO!!
...in my build thread??
Are you still building anything in this thread?
I sure am. I intentionally don't update shit - I'm not here to please anyone.
LOL, well here we are building page 6...
-
Looks great.
-
Bump because EP3's are a form of failure.
GTFO!!
...in my build thread??
Are you still building anything in this thread?
I sure am. I intentionally don't update shit - I'm not here to please anyone.
LOL, well here we are building page 6...
FUCK, I never thought of it like that. Maybe I should lock the thread inbetween updates??
-
the perpetualy locked tread
interesting concetp
-
Bump because EP3's are a form of failure.
GTFO!!
Are you defending EP3's in my build thread?? Fuck you!
EFs are like alcoholism, and alcoholism is not failure...
JD will be a retired old(er) man before this project is finished up.
-
If you lock the thread then we cant bump it every 2 minutes. Thats just not gonna work for me. :P
-
Fuck, you have a point. And here I logged on specifically to lock it.
What should I do now?? I need to call buk for life advice on this, and other, topics.
-
::)
:noel:
Pussy
-
POST PORN, N00B!!!
-
Hold on....i'm currently diggi'n some up of your Moms that i got stored away :evil:
-
bump O0
-
Bump to keep building this thread. :P
-
Post some pics. I'm sure the project is progressing. Even Weir's CRX build is progressing.
-
I got minorly distracted.
(http://i256.photobucket.com/albums/hh166/joeymisanthropy/civicHOTNESS.jpg)
+
(http://i256.photobucket.com/albums/hh166/joeymisanthropy/INTEGRAPOWER.jpg)
-
holy fuck, what i wouldn't give to have that kind of space. i'd have so many treasures in the backyard. do you ever just sit on the porch with a frosty beverage and ogle at them all? i know i would.
-
holy fuck, what i wouldn't give to have that kind of space. i'd have so many treasures in the backyard. do you ever just sit on the porch with a frosty beverage and ogle at them all? i know i would.
First pic is the house (I have one car), the second is the shop. Wish we had more room. :(
-
First pic is the house (I have one car)...
So does this mean that it runs?
-
I've been driving it for some weeks now.
-
And, before he posts, I'd like to say FUCK YOU to Sewell.
-
Fuck the integra, whats up with the bandit mobile next to it??
And, before he posts, I'd like to say FUCK YOU to Sewell.
wtf how how did he know to post that right before actually hit the post button?
-
Fuck the integra, whats up with the bandit mobile next to it??
~75 or 76, we've been waiting for a couple months on headgaskets for it. Goforth freshened up the 468 out of his 70.5 and sold/traded it to a friend. It should completely overpower the stock slopped out suspension on the old thing, be an interesting deathride.
And, before he posts, I'd like to say FUCK YOU to Sewell.
wtf how how did he know to post that right before actually hit the post button?
Need I remind you? I'm the Grand Wizard of the Internet, sir.
-
Cuteboost vs baldboost. go
-
Wish we had more room. :(
I ASSume you mean at the shop. There's plenty of room in the front yard. :noel:
-
dual cam d series crew is getting bigger
-
dual cam d series crew is getting bigger
overrated
-
Fuck You Joseph Davis
We need ripper vids of said "running" vehicle.
-
Fuck You Joseph Davis
We need ripper vids of said "running" vehicle.
this
-
Fowee's old si is an absolute street monster. Nothing like ripping on second to cross a busy highway with enough spare parts packed in around you to build another car. Then you realise that umm yeah all that metal could very easily be shrapnel thats going to kill you.
-
(http://i256.photobucket.com/albums/hh166/joeymisanthropy/INTEGRAPOWER.jpg)
[/quote]
hook me up with the bumper and some shit off that vr4 :yes:
mine needs some stuff PLEASE haha
-
this thread is worthless without riper vids
-
You are worthless, period. O0
-
joey I think I have posted more ripper vids than you have, and I last posted a ripper vid ...back in 03-
-
joey I think I have posted more ripper vids than you have, and I last posted a ripper vid ...back in 03-
Eh, he posted that whole pinks all out thread on ohmt. Id say that counts as a decent ripper vid. :?:
-
iirc, he wasnt the driver.
-
This thread sucks.
-
(http://www.cousinlarry.com/upload2/caroline.jpg)
needs more boobies.. Perhaps we can tattoo a nipple on JD's head for entertainment.
-
MOAR!!!!
and
SAUCE???
-
(http://www.cousinlarry.com/upload2/caroline.jpg)
needs more boobies.. Perhaps we can tattoo a nipple on JD's head for entertainment.
Quite nice.
Well played Sir. Well played indeed.
-
Time to start building this thread again.
-
Time to start building this thread again.
-
bump
-
reported.
-
Pending deletion.
-
Pending deletion.
No surprise here :noel:
-
Pending deletion.
Finally, some progress.