:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: jdmhatchracer94 on March 07, 2009, 12:51:57 AM

Title: 92 4 door eg ls-t updated 10/24/11
Post by: jdmhatchracer94 on March 07, 2009, 12:51:57 AM: as it sits right now the bottom end is complete:

81.5 wiseco -12cc pistons
eagle rods
arp main studs
moroso 5q oil pan and pick up
ported and shimed gsr oil pump

head:
sk2 springs and retainers
arp head studs
stock port head (got bored and did a lil cleaning up on the ports)
chris's 74mm tb+space+ported mani
cometic 81.5 head gasket
stock cams (for now)
delta cams also

Trans:
ls mfactory lsd
ACT 12lbs flywheel
cc stage 4

Boost parts:
Holset H1C
egay bov
dunno what brand but heavy thick fmic
aluminum charge pipe

fueling
Aem rail and regulator
780cc precision
aeromotive fp gauge
walboro in tank

Well here are some pics sorry not while i'm workin on it
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fth_Picture-1.jpg&hash=5e6be479604b4ad3fecefca24a1f4f75b6fb9569) (http://s648.photobucket.com/albums/uu209/knjperformance/?action=view&current=Picture-1.jpg)
short block all assembled lookin got. Tha guys at Bud's in lakewood did the machine work but the ass primed the block oh well

The minty head after soaking in oil eater then hitting the hot tank a.k.a Dishwasher on pot and pan mode
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fth_0407091825.jpg&hash=53c7b1a958cf3c7c16162ab45b74c6b669d518cd) (http://s648.photobucket.com/albums/uu209/knjperformance/?action=view&current=0407091825.jpg)
also installed the new seals and lapped the shit out the valves. also installed the sk2 springs and retainers

Heres the long block starting to come together looks pretty good
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fth_0407092129.jpg&hash=974f73059fd95549a0555663a8b01dbd21aac9c3) (http://s648.photobucket.com/albums/uu209/knjperformance/?action=view&current=0407092129.jpg)

Gotta take more pics as it sits now I got my mani back from chris with the plate and 74mm tb.

also picked up a gsr trans for this bad boy.

Sorry bout the celly pics I brake every fuckin camera I get.
Title: Re: 93 hatch ls-t build
Post by: silverac on March 07, 2009, 12:51:51 PM: damn kid our set ups are almost identical. i got a cx with the same motor, same cams, crower springs and retainers, 9.1, 81.5 mm wiesco pistons, and bosch 1000cc. im using neptune. im running the garret t3 60-1 ,spoolin performance ramhorn , 3" xhaust.
Title: Re: 93 hatch ls-t build
Post by: jdmhatchracer94 on March 07, 2009, 05:47:11 PM: nice me and ratcityrex have the same bottom end. He bought my delta cams I had done off me for his setup
Title: Re: 93 hatch ls-t build
Post by: ratcityrex on March 07, 2009, 05:48:41 PM: yep, its gona be fun running my car down the track with beau's old 25" slicks i bought off him...lol
Title: Re: 93 hatch ls-t build
Post by: jdmhatchracer94 on March 07, 2009, 05:52:39 PM: I finish date got pushed back but no biggy I just wan't it done before pinks all-out in august
Title: Re: 93 hatch ls-t build
Post by: ratcityrex on March 07, 2009, 05:58:07 PM: did you ever get the spring compressor atachment from majestic?
Title: Re: 93 hatch ls-t build
Post by: jdmhatchracer94 on March 07, 2009, 07:36:11 PM: ordered it waitin to receive
Title: Re: 93 hatch ls-t build
Post by: ratcityrex on March 07, 2009, 07:41:41 PM: right on, took about a week for me to get mine
Title: Re: 93 hatch ls-t build
Post by: jdmhatchracer94 on March 07, 2009, 07:43:31 PM: thats cool I was gonna send my head to chris for p&p but head told me to send him the mani for p&p for one of his 74mm tb and spacer
Title: Re: 93 hatch ls-t build
Post by: silverac on March 09, 2009, 08:36:35 PM: hey jdmhatchracer which wiesco pistons do u have exactly
Title: Re: 93 hatch ls-t build
Post by: ratcityrex on March 09, 2009, 09:58:06 PM: Quote from: silverac on March 09, 2009, 08:36:35 PM
hey jdmhatchracer which wiesco pistons do u have exactly

he has the 81.5mm -12cc dished pistons
Title: Re: 93 hatch ls-t build
Post by: jdmhatchracer94 on March 10, 2009, 01:13:15 AM: plans changed now stock head ports wit chris's 74mm tb+spacer+porting the hell out the mani
Title: Re: 93 hatch ls-t build
Post by: silverac on March 12, 2009, 12:47:07 AM: Quote from: ratcityrex on March 09, 2009, 09:58:06 PM
Quote from: silverac on March 09, 2009, 08:36:35 PM
hey jdmhatchracer which wiesco pistons do u have exactly

he has the 81.5mm -12cc dished pistons
those are the ones i got
Title: Re: 99 coupe ls-t build
Post by: jdmhatchracer94 on May 11, 2009, 08:56:41 PM: cool
Title: Re: 99 coupe ls-t build
Post by: hotrex on May 11, 2009, 09:54:27 PM: rival built ls 4door. mmmmmm
Title: Re: 99 coupe ls-t build
Post by: jdmhatchracer94 on May 11, 2009, 10:10:35 PM: you got me with a ported head
Title: Re: 93 hatch ls-t build
Post by: jdmhatchracer94 on October 04, 2009, 11:04:38 PM: Okay been a while but i got some work done. Here is the car as I got it.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2FPicture002.jpg&hash=0a282c7172e7ed2d9a4b86491417a2861d575e47)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2FPicture003.jpg&hash=d568b12d4e4a887645da97b434a6a921c1c6abe0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2FPicture001.jpg&hash=cebe189d6f6f2e13f2f0cd7155082a823673a41a)

so there it is so got bored this week and and decided to work on it i will let the pics talk for them selves
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2F93hatchproject001.jpg&hash=77d682ae7bd8953113d9f7f01f08fba3018fb64a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2F93hatchproject002.jpg&hash=a0cafeca72f978122e40b58d898956cd5ffec6d8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2F93hatchproject003.jpg&hash=370963e14d027a455d8734f139f4d1b35e65292e)

so the prep is done now what
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2F93hatchproject005.jpg&hash=c5085e78a7a784656b7b4a44f49e90542ef32cf3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2F93hatchproject006.jpg&hash=244c0611acb896504c1a234cc923f4f90346e703)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2F93hatchproject007.jpg&hash=2aa1dac9a62f178488ef19b061c6c2e5cc9f2f81)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2F93hatchproject008.jpg&hash=c892ecfd85f69f9f67455aa82536432ad93bacbd)

Still needs to be cleared but not bad for $50 I must say any questions complantes anything cool
Title: Re: 93 hatch ls-t build updated 10-4-09
Post by: jdmhatchracer94 on October 05, 2009, 10:58:26 AM: engine is pretty much done all assembled just waitin on clutch and gotta do breather setup
Title: Re: 93 hatch ls-t build updated 10-4-09
Post by: deeznutts on October 05, 2009, 11:41:56 AM: so you painted the jambs but not the bay?? good shit colors a little bright for my taste but it doesnt look bad
Title: Re: 93 hatch ls-t build updated 10-4-09
Post by: jdmhatchracer94 on October 05, 2009, 11:51:19 AM: yup painted jambs but not bay dont give a fuck how often anyone see under the hood? it's actualy darker then the pic shows the flash makes it look bright
Title: Re: 93 hatch ls-t build updated 10-4-09
Post by: 88dx on October 05, 2009, 12:40:52 PM: Did you buy that car off craigslist a while ago? I think I remember seeing it on C/L.

Good to see you working on your setup again :yes:
Title: Re: 93 hatch ls-t build updated 10-4-09
Post by: jdmhatchracer94 on October 05, 2009, 02:36:45 PM: naw bought from rollins auto wrecking about 4 years ago sold it twice and got it back again

I had it for sale on CL I think
Title: Re: 93 hatch ls-t build updated 10-4-09
Post by: onlyflash944 on October 13, 2009, 11:43:05 PM: need a tailgate and rear hatch window?
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi91.photobucket.com%2Falbums%2Fk295%2Fonlyflash944%2FFor%2520Sale%2FIMG_2989.jpg&hash=c928810106d40e79b34c5a7bedf0e0424b159bf4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi91.photobucket.com%2Falbums%2Fk295%2Fonlyflash944%2FFor%2520Sale%2Fy8head005.jpg&hash=31c861672c62cc591b071b2ad0f3174ff8251b99)

near 24060? if so i got you covered

build looks tits. what paint did you use? i've wanted to try the summit el cheap-o or the duplicolor paint shop stuff thats like 20 bones a gallon
Title: Re: 93 hatch ls-t build updated 10-4-09
Post by: ApexSilver06MR on October 14, 2009, 02:16:54 PM: looks like the kragen shit.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi40.photobucket.com%2Falbums%2Fe250%2FJayNLorimel%2Fprojects%2FCIMG0439.jpg&hash=32ab5cf6375ce9c59891864afbd71341b16a3440)
dont mind the master cyl, booster and cross members painted. they have been all cleaned up as well as a new booster and master cyl...

why are you copying my paint????
Title: Re: 93 hatch ls-t build updated 10-4-09
Post by: jdmhatchracer94 on October 14, 2009, 07:40:53 PM: yup same shit work good fo what it is
Title: Re: 93 hatch ls-t build updated 10-4-09
Post by: jdmhatchracer94 on January 07, 2010, 10:29:43 PM: well final got the motor in and runnin just gotta finish a few thing before I can test drive it
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fmotorisin.jpg&hash=00b70db3700be19b7ab05c0eb4160d7f81fcdf4a)

here is how the paint job came out
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Ffinalpaint2-1.jpg&hash=6c2504468a7556f154f9dbc071fcdee25db9ffb5)

and if you dont like it
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fhi.jpg&hash=323befc630cff7742636686b5d83cf33a5e5c4f8)
Title: Re: 93 hatch ls-t build updated 1/7/10
Post by: Teg2boo on January 07, 2010, 10:32:48 PM: Where is the turbo ???
Title: Re: 93 hatch ls-t build updated 1/7/10
Post by: jdmhatchracer94 on January 07, 2010, 10:39:18 PM: on the shelf have to run it through state inspection next week then after that the boost comes
Title: Re: 93 hatch ls-t build updated 1/7/10
Post by: drivin96 on January 07, 2010, 11:58:59 PM: i like how u painted the back passenger tire blue to :?:
Title: Re: 93 hatch ls-t build updated 1/7/10
Post by: chris on January 08, 2010, 12:00:44 AM: I like the paint ;D
Title: Re: 93 hatch ls-t build updated 1/7/10
Post by: jdmhatchracer94 on January 08, 2010, 01:16:58 AM: makes the tire sticky
Title: Re: 93 hatch ls-t build updated 1/7/10
Post by: ratcityrex on January 08, 2010, 02:39:42 AM: Sent you a couple of bins to try out.
Title: Re: 93 hatch ls-t build updated 1/7/10
Post by: JACER63 on January 09, 2010, 05:16:03 PM: hey man im in graham area...if you need some help with tuning i have all equipment , with crome pro..etc send me a pm if u like... jace
Title: Re: 93 hatch ls-t build updated 1/7/10
Post by: jdmhatchracer94 on January 11, 2010, 10:49:38 PM: thanks I will let you know if I need help. Bitch is runnin good doesnt stop for shit but runs good
Title: Re: 93 hatch ls-t build updated 1/30/10
Post by: jdmhatchracer94 on January 30, 2010, 08:25:08 PM: Well had a set back thursday went for my state patrol inspection and fail because I bought the motor 3 years ago and now that person doesn't own the car. So i have to find either the person that owns it now and have them write me a receipt of buy another motor fucking washington i hate this shit.

on the plus side this fucker is quick for bein so low compression I figures it would hurt but it runs with the mustang gt no problem.Dude was pissed when i told him I still had two gears to go and I was already a full car ahead
Title: Re: 93 hatch ls-t build updated 1/30/10
Post by: onlyflash944 on January 30, 2010, 08:27:29 PM: lol, inspection shit sucks.

I love SW VA because no smog or any shit about swapping motors. i have a buddy that gives them and i usually just go at a wierd hour and it takes me 10 min top to get a new sticker
Title: Re: 93 hatch ls-t build updated 1/30/10
Post by: ratcityrex on January 31, 2010, 09:58:59 PM: Quote from: jdmhatchracer94 on January 30, 2010, 08:25:08 PM
on the plus side this fucker is quick for bein so low compression I figures it would hurt but it runs with the mustang gt no problem.Dude was pissed when i told him I still had two gears to go and I was already a full car ahead

Oh man but low compression sucks on the street. That what everyone else tells me. Same thing some dude at the track told me b4 I raced his type-arrr. Low compression sucks so bad that I only had 3 car lengths on him at the end of the track.

Fuck the haters, Low compression is where its at!!
Title: Re: 93 hatch ls-t build updated 1/30/10
Post by: 88dx on January 31, 2010, 10:12:10 PM: Quote from: jdmhatchracer94 on January 30, 2010, 08:25:08 PM
Well had a set back thursday went for my state patrol inspection and fail because I bought the motor 3 years ago and now that person doesn't own the car. So i have to find either the person that owns it now and have them write me a receipt of buy another motor fucking washington i hate this shit.

on the plus side this fucker is quick for bein so low compression I figures it would hurt but it runs with the mustang gt no problem.Dude was pissed when i told him I still had two gears to go and I was already a full car ahead
That blows :-\ Hope u get it figured out. Is it a obd2 block with Vin #?
Title: Re: 93 hatch ls-t build updated 1/30/10
Post by: jdmhatchracer94 on January 31, 2010, 10:59:43 PM: yeah its a 97 block I got the vehicle owners name and addy today so just gotta pay them a visit amd hope for the best
Title: Re: 93 hatch ls-t build updated 1/30/10
Post by: ratcityrex on January 31, 2010, 11:18:35 PM: If you cant get all this done let me know, I might have a little trick up my sleeve :yes:
Title: Re: 93 hatch ls-t build updated 1/30/10
Post by: 88dx on January 31, 2010, 11:19:21 PM: Quote from: jdmhatchracer94 on January 31, 2010, 10:59:43 PM
yeah its a 97 block I got the vehicle owners name and addy today so just gotta pay them a visit amd hope for the best
if that dosent work im sure a few death threats will do the trick :P
Title: Re: 93 hatch ls-t build updated 1/30/10
Post by: jdmhatchracer94 on February 01, 2010, 03:40:13 AM: one way or another i will get what I need no question. just gettin impatiant wanna get this thing ready for the track this year
Title: Re: 92 4 door eg ls-t updated 2/9/10
Post by: jdmhatchracer94 on February 10, 2010, 01:27:26 AM: okay well fuck wsp those fuckers cant make up there minds what to do and won't pass my car so plans have changed picked up a eg 4door for $300 last night clear title gonna through all the good shit in this and have some fun.

If anyone is interested I got a hatch i will sell for a cheap price
Title: Re: 92 4 door eg ls-t updated 2/9/10
Post by: speedjunky01 on February 10, 2010, 12:35:21 PM: yeeeesss 4dr rHMT crew son get some pics of that bitch up
Title: Re: 92 4 door eg ls-t updated 2/9/10
Post by: jdmhatchracer94 on February 10, 2010, 01:28:41 PM: post picks of the new slut when i get home
Title: Re: 92 4 door eg ls-t updated 2/9/10
Post by: jdmhatchracer94 on March 30, 2010, 11:18:38 AM: okay so I finally got shit all worked out this hase been a fuckin nightmare. Here she is in all her $300 glory

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2F4door.jpg&hash=c2adf4553a6e672535130d4149c1e933e1f4d20d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2F4door1.jpg&hash=8ea283e971554e6872a305dd19746d05d5736f8b)

Thats all for now I fixed the front end and shit already put the ls in and runnin needs a windshield to drive still but that will be this week
Title: Re: 92 4 door eg ls-t updated 2/9/10
Post by: HiProfile on March 30, 2010, 05:08:34 PM: Quote from: jdmhatchracer94 on March 30, 2010, 11:18:38 AM
okay so I finally got shit all worked out this hase been a fuckin nightmare. Here she is in all her $300 glory

Wait, if they won't pass the hatch because the motor, why would they pass it in the 4dr? And if they would pass a car with a diff motor, why not put the d15b7 in the hatch until it passes if you have the title? Other state's rules confuse me. In WI all you have to do for pre-96's is pay license+reg. No inspection, no tests, no nothing. They can't even legally ask you to pop the hood.
Title: Re: 92 4 door eg ls-t updated 3/29/10
Post by: jdmhatchracer94 on March 31, 2010, 01:13:05 AM: thats what I am doin using the engine from the 4 door in the hatch to pass inspection. I put the ls in the 4dr cause it is on a clean title there for I can fully insure it the hatch can only have liability. Pluse it give me a reason to build another engine might go f22 in it buddy has one sittin.
Title: Re: 92 4 door eg ls-t updated 3/29/10
Post by: jdmhatchracer94 on April 12, 2010, 09:13:29 PM: okay so started some more today finally get to work on the damn thing. made a catch can and installed it to the block
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fcatchcan.jpg&hash=ce3de5a45a02cc0929cf637fe7c4c6d0b5075582)
took a couple mins at work and made it

First time ever welding aluminum I migged this shit for the upper charge pipe
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fchargepipe.jpg&hash=bb4301dc6bcb32ba202cc6d6960568ede6bae1e7)
Not to bad looks better than I thought it wou;ld be

And last the full body shot
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fcar.jpg&hash=724dc15624dea7a71c9765271efc6503291e5030)
Ridin them 13's till the tires give out
Title: Re: 92 4 door eg ls-t updated 4/12/10
Post by: jdmhatchracer94 on April 20, 2010, 11:59:27 PM: got a little more done today mounted the intercooler
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2FPicture002-1.jpg&hash=c5b49b9997d90c23f33982ba63298c1f48e549c7)

got the mani and turbo all done on the mock up motor tomorrow is the test fit
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2FPicture001-1.jpg&hash=525a9b822cee70010fb888034b9437d43d1463ac)

have to do some welding on the charge pipes tomorrow at work. Still need a fuel pump and 97 accord resistor box (so it's just plugs in) hope fully be done by end of the month so it will be all ready for the dyno meet.

Gotta find some adjustable cam gears also
Title: Re: 92 4 door eg ls-t updated 4/20/10
Post by: onlyflash944 on April 21, 2010, 01:18:48 AM: you get that fender off a vw or a bmw forum?

i love the log manifolds that just use two elbows and some straight. much easier than my two elbows and two tees i made a while back, imo
Title: Re: 92 4 door eg ls-t updated 4/20/10
Post by: jdmhatchracer94 on April 21, 2010, 10:44:07 AM: just used what I had manifold cost me $0 to make all that was random parts I got from people. junk yard certi-fit fender.
Title: Re: 92 4 door eg ls-t updated 4/20/10
Post by: jdmhatchracer94 on May 01, 2010, 01:20:28 AM: well here is the down pipe in all it's bird shit glory. only have a few things left to do before the meet. Any one close thats know tuning wanna help a brother out
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fcarprojects012.jpg&hash=c3fccb7b6a951b6a98fa1f5b157a567060a0d77b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fcarprojects014.jpg&hash=c51836391f65d82b2e1f8d3c077ae71388a6db81)
all tacked up who needs manderal bends pie cuts FTMFW

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fcarprojects015.jpg&hash=acd159a299fe8cf0c387899d80ab5519be0a6b69)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fcarprojects016.jpg&hash=9ed75f0bc0072a03d20b7eaaa26a35f9d1a2b7d2)
Fluxcored to shit. Man I hate that shit but it's what I have right now.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fcarprojects013.jpg&hash=8890c1cbe7f18f38f84df8435279212206c34612)
last but not leat the baller v_band flange fucker cost more than my manifold and dp combined

gotta love the half vise broke the other half yesterday well time to buy a better one
Title: Re: 92 4 door eg ls-t updated 4/30/10 page 2
Post by: speedjunky01 on May 01, 2010, 01:35:51 AM: The dp looks better then the shit I have seen the locals do with madrel bends

Nice job man I hear you on the band those fuckers are expensive
Title: Re: 92 4 door eg ls-t updated 4/30/10 page 2
Post by: evo_lucian on May 01, 2010, 07:59:05 AM: your car look like shit, i like :yes:
Title: Re: 92 4 door eg ls-t updated 4/30/10 page 2
Post by: jdmhatchracer94 on May 01, 2010, 02:12:38 PM: why thank you it is shitty but functional
Title: Re: 92 4 door eg ls-t updated 4/30/10 page 2
Post by: ratcityrex on May 01, 2010, 03:05:21 PM: hit up leed for a tune, or d112crzy. If you need a good running basemap, I could email one to you.
Title: Re: 92 4 door eg ls-t updated 4/20/10
Post by: SDRAWKCAB on May 01, 2010, 03:24:19 PM: Quote from: jdmhatchracer94 on May 01, 2010, 01:20:28 AM
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fcarprojects016.jpg&hash=9ed75f0bc0072a03d20b7eaaa26a35f9d1a2b7d2)

FRONT PAGE!
Title: Re: 92 4 door eg ls-t updated 4/30/10 page 2
Post by: theidealone on May 02, 2010, 11:08:41 PM: Ive seen pie cut bends, but pie cut straights FTW! LOL.
Title: Re: 92 4 door eg ls-t updated 4/30/10 page 2
Post by: ApexSilver06MR on May 03, 2010, 01:21:05 AM: Quote from: theidealone on May 02, 2010, 11:08:41 PM
Ive seen pie cut bends, but pie cut straights FTW! LOL.
+1
Title: Re: 92 4 door eg ls-t updated 4/30/10 page 2
Post by: LS1pwNzJ00 on May 03, 2010, 04:48:13 AM: buk welded your dp
Title: Re: 92 4 door eg ls-t updated 4/30/10 page 2
Post by: jdmhatchracer94 on May 03, 2010, 11:45:26 AM: nope he cant even do this good I will have pics of end product tonight
Title: Re: 92 4 door eg ls-t updated 4/30/10 page 2
Post by: jdmhatchracer94 on May 09, 2010, 11:46:33 PM: ALMOST done bout fuckin time. need to get oil and shit tomorrow. also anyone wanna hook me up with a basemap? I gotta get some one to tune this thing once i know it's all runing well saturday is coming quicker than I though.

Tomorrows my Bday fuck ya drinkin and turbo car= awsome
Title: Re: 92 4 door eg ls-t updated 5/9/10
Post by: ratcityrex on May 09, 2010, 11:48:01 PM: call me foo!
Title: Re: 92 4 door eg ls-t updated 5/9/10
Post by: chris on June 16, 2010, 03:37:19 PM: update!!!!!!!!!!!!!!
Title: Re: 92 4 door eg ls-t updated 5/9/10
Post by: jdmhatchracer94 on June 16, 2010, 06:46:01 PM: I will soon runs pretty damn good waitin for ebc from russ then to get a final tune with some #. I want to race on the 27th in the forced induction sport class but got no lsd and as it sits now i have no traction.
Title: Re: 92 4 door eg ls-t updated 5/9/10
Post by: chris on June 16, 2010, 07:43:55 PM: weld the diff if you dont drive it around
Title: Re: 92 4 door eg ls-t updated 5/9/10
Post by: jdmhatchracer94 on June 16, 2010, 11:40:14 PM: thats my prob I do drive it around if i had a spare diff i would weld the shit out of it and rock it
Title: Re: 92 4 door eg ls-t updated 5/9/10
Post by: chris on June 19, 2010, 01:31:04 AM: A buddy of mine who does alot of transmission work has tons of stock diff's if interested. He relocated shops a couple months back so he was throwing away alot of stuff but he kept a couple last time I was there.
Title: Re: 92 4 door eg ls-t updated 5/9/10
Post by: jdmhatchracer94 on June 19, 2010, 06:06:44 PM: goin to see what i can find today. Also need a smaller exhaust housing for the holeslut have a 18cm2 right now want a 12cm2 one
Title: Re: 92 4 door eg ls-t updated 6/20/10
Post by: jdmhatchracer94 on June 25, 2010, 06:07:07 PM: got a diff for the ls tranny and welded it up sorry no pics in a hurry. bitch will be ready by the 27th still no tuning but fuck it she blows she blows
Title: Re: 92 4 door eg ls-t updated 6/25/10
Post by: jdmhatchracer94 on June 28, 2010, 11:11:54 AM: Well pulled a 13.25@105.xxx mph and she survived gotta get the vids up but my comp is bein gay. also this was on stock cams, no tuning, stock suspension, and a prayer all in all great time. Only prob i had was a pin hole on the heater hose.
Title: Re: 92 4 door eg ls-t updated 6/28/10
Post by: chris on June 29, 2010, 06:16:26 PM: Not to bad for first time out. How much boost? I agree with the 12 housing
Title: Re: 92 4 door eg ls-t updated 6/28/10
Post by: jdmhatchracer94 on June 29, 2010, 10:55:50 PM: 15lbs spinnin 1 2 3
Title: Re: 92 4 door eg ls-t updated 6/28/10
Post by: jdmhatchracer94 on October 24, 2011, 02:03:56 PM: (https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2Fdynosheet.jpg&hash=bc530c040482aa09bd0000916092631e22727c36)
thats what it did at the last dyno day on a enhanced basemap

since then I have painted the car. Still haven't tuned it lol. There will be a update soon as I am waiting on some new parts
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi648.photobucket.com%2Falbums%2Fuu209%2Fknjperformance%2F167103_156798307705548_100001261397968_345004_2049261_n.jpg&hash=6e6fa40f31bc774ac88293bb36f47ea108de3c05)