:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: boosted 00 black si on December 01, 2009, 07:09:40 PM

Title: Project 11 second SI E85 rippers vids added
Post by: boosted 00 black si on December 01, 2009, 07:09:40 PM
shooting for 10's in the si for 2010 the 60-1 turbo took a shit on me so i got a killer deal on a holset turbo. i had to shave the head n the compressor housing a lil bit to get it to fit  :noel: so now all i got left to do is injectors, get rid of the aebs intake manifold n replace it with the edelbrock intake manifold n get the 74mm tb and a battery relocation in the trunk so i could fit my new catch can set up n get the car tuned on race gas on 30psi

motor
stock rebuilt head 3 angle valve type r valve tran job blah blah
b16a 81.5mm decked
probe forged piston n probe h beam rods
micro polished and balanced crank
all arp main, rod and head bolts
clinic 850cc injectors
aeromotive fpr
255 walbro pump
-6 fuel return line
earls inline fuel filter
gsr cam
aem gears
revhard intake manifold
70mm throttle body
moroso catch can set up
aem wideband
autometer oil n boost n volt
msd blah blah

b16 trans with ls final drive obx lsd
competion stage 5 clutch

turbo set up
top mount turbo manifold
holset hx35/wh1c ported the fuck out
tial 44mm wastegate
tial 50mm bov
big ass egay intercooler 2.5 ic piping all round
3 inch vband open downpipe  :noel:
x mbc


suspension
kyb agx struts
skunk 2 coilovers
19mm rear sway bar
black blox lower control arms

car made 385hp and 250 torque on 16psi on pump tuned by xeno
on old set up
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/dynogr.jpg)

old set up
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/t1.jpg)

holset turbo
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/compre.jpg)

port work done by eric

compressor housing
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/comp.jpg)

exhaust housing almost done
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/port.jpg)

done
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/porttt.jpg)


(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/hx4.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/hx2.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/hx5.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/hx1.jpg)

headlight cut out
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/hx3.jpg)

oil feed set up
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/feed.jpg)
Title: Re: Project 10 second SI
Post by: crxvtec91 on December 01, 2009, 07:15:59 PM
Oil feed is baller :noel:
Title: Re: Project 10 second SI
Post by: boosted 00 black si on December 01, 2009, 07:18:58 PM
Oil feed is baller :noel:

thats right had to make it work cost 20 bucks to make  :noel:
Title: Re: Project 10 second SI
Post by: WOT on December 01, 2009, 07:32:45 PM
Yellow zip ties just make it that much better lol, who the fuck buys yellow zipties
Title: Re: Project 10 second SI
Post by: boosted 00 black si on December 01, 2009, 07:36:23 PM
haha stop hating on my zip ties nig. 6 bucks at home depot for a shit load  :noel:
Title: Re: Project 10 second SI
Post by: ratcityrex on December 01, 2009, 07:46:45 PM
Looks good, Im interested in how fast the spool up is.
Title: Re: Project 10 second SI
Post by: boosted 00 black si on December 01, 2009, 07:58:25 PM
i do to thats why i did alot of port work to the turbo to hope it will help with flow and spool time i'm also rocking a 3 inch open dp  :noel:
Title: Re: Project 10 second SI
Post by: DRQPQUT on December 01, 2009, 09:07:33 PM
i bet that sounds hot...neighbors love the dirty3rds ;D my neighbors like me but they trully love BDVT
Title: Re: Project 10 second SI
Post by: bigdaddyvtec on December 01, 2009, 09:26:07 PM
Hi there  :noel:
Title: Re: Project 10 second SI
Post by: h2a on December 01, 2009, 10:34:31 PM
Probe pistons, good piston for the b series lover on the cheap side. I mis the tuner toy rod.... :?:
Title: Re: Project 10 second SI
Post by: boosted 00 black si on December 01, 2009, 11:03:25 PM
i bet that sounds hot...neighbors love the dirty3rds ;D my neighbors like me but they trully love BDVT

my neighbors are cool as fuck  :noel:
Title: Re: Project 10 second SI
Post by: boosted 00 black si on December 01, 2009, 11:32:59 PM
Probe pistons, good piston for the b series lover on the cheap side. I mis the tuner toy rod.... :?:

i've been running these pistons for three years now pretty dam strong i use to beat the shit out the car everyday..now since the trans took a shit me again i just took it off the road so im  just using the car for the track n sum $ runs now
Title: Re: Project 10 second SI
Post by: danz on December 02, 2009, 09:18:22 PM
your timing belt told me to tell you to get the fuck away and fuck off.

please continue
Title: Re: Project 10 second SI
Post by: marcj on December 02, 2009, 09:50:23 PM
I had almost the same setup, and let me tell you; as a street car, it fucking sucks.
mainly because when you're daily driving, there is no boost, unless you're careless of law enforcement.
when you're racing, it's fucking great, because the boost comes on hard and fast once you're in it.

I would put money on this setup making a lot less power before 5500 rpm, simply because you were running a T3 turbine side before. Less exhaust volume for less displacement is key, but since you're going race only this doesn't apply thanks to the anti-lag and the high revving aspect of the B16.

My next setup is going to be LS/VTEC at or under t3/t4 57 trim style  :noel:
Title: Re: Project 10 second SI
Post by: boosted 00 black si on December 03, 2009, 01:59:33 AM
I had almost the same setup, and let me tell you; as a street car, it fucking sucks.
mainly because when you're daily driving, there is no boost, unless you're careless of law enforcement.
when you're racing, it's fucking great, because the boost comes on hard and fast once you're in it.

I would put money on this setup making a lot less power before 5500 rpm, simply because you were running a T3 turbine side before. Less exhaust volume for less displacement is key, but since you're going race only this doesn't apply thanks to the anti-lag and the high revving aspect of the B16.

My next setup is going to be LS/VTEC at or under t3/t4 57 trim style  :noel:

the car will be retuned on race gas. when i blow this slut up i'm going h2b  :noel: but right i'm trying to get this tranny shit out the way
Title: Re: Project 10 second SI
Post by: Pootie on December 11, 2009, 09:35:26 PM
looks goood!!
 lets get it done.. I don't see why this thing wont go 10's.!!

 see you in March!! :yes:
Title: Re: Project 10 second SI
Post by: boosted 00 black si on December 11, 2009, 11:02:35 PM
thanx pootie i just fixed the trans n put it in on monday now i just got to get a set of injectors n get it retuned on 30psi  :noel:
whats up with the high compression set up?? i see alot of people doing this now
Title: Re: Project 10 second SI
Post by: boosted 00 black si on December 16, 2009, 08:59:43 PM
just picked up  a set of 880's injectors...evo 560's for sale check the for sale section
Title: Re: Project 10 second SI
Post by: chris on December 16, 2009, 09:01:10 PM
I just ran another batch of 74mm throttle bodies on the lathe if your interested. Still have them on sale too
Title: Re: Project 10 second SI
Post by: boosted 00 black si on December 16, 2009, 09:04:29 PM
i'll let u know how much to port a intake out????
Title: Re: Project 10 second SI
Post by: chris on December 16, 2009, 09:17:33 PM
which one?
Title: Re: Project 10 second SI
Post by: boosted 00 black si on December 16, 2009, 09:19:05 PM
got a aebs type r style
Title: Re: Project 10 second SI updated 1/10
Post by: boosted 00 black si on January 10, 2010, 02:19:40 AM
iiiiiii
Title: Re: Project 10 second SI updated 1/10
Post by: crxvtec91 on January 10, 2010, 02:52:40 AM
You Sir are a true baller :noel:
Title: Re: Project 10 second SI updated 1/10
Post by: Kenny Rogers on January 10, 2010, 03:43:05 AM
(http://rpjsyndicate.files.wordpress.com/2008/10/morecowbell.jpg)

Also, nice parts.  What gauge wire are you gonna use for those dual walbrozzzzzz?
Title: Re: Project 10 second SI updated 1/10
Post by: boosted 00 black si on January 12, 2010, 09:40:30 AM
You Sir are a true baller :noel:

hows the build coming along steve
Title: Re: Project 10 second SI updated 1/10
Post by: crxvtec91 on January 12, 2010, 11:17:48 PM
You Sir are a true baller :noel:

hows the build coming along steve

Need money lol. Might pick up a already built short block as a back up.
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: 98vtec on January 12, 2010, 11:18:19 PM
h series ftw
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: boosted 00 black si on January 13, 2010, 01:32:01 AM
when the b16 blows i'm going h2b for sure  :noel:
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: boosted 00 black si on January 23, 2010, 12:22:21 AM
 ;D
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: d112crzy on January 23, 2010, 01:50:10 AM
God damn you got a fucking ballin deal on that Full Blown pump setup.

You looking to sell that AEBS?
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: boosted 00 black si on January 23, 2010, 12:20:27 PM
God damn you got a fucking ballin deal on that Full Blown pump setup.

You looking to sell that AEBS?

i know thats why i junp on it...i sold the aebs to pay for my sheet metal intake manifold  :noel:
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: boosted 00 black si on February 07, 2010, 07:24:32 PM
llll


Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: mycarslow on February 07, 2010, 07:41:41 PM
pretty baller setup but i would think you could make the same thing. in face i might just try on my next day off.
to me it looks like its just the two hangers arms coming down and the its feed into a Y fitting with like a -10 AN.
still baller none the less
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: boosted 00 black si on February 07, 2010, 08:08:11 PM
i was goona try to mod the stock hanger for dual walbro pumps but i got the killer deal on the full blown set up  :noel:
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: boosted 00 black si on February 07, 2010, 08:09:33 PM
850cc clinic injectors  :noel:

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/innn.jpg)
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: boosted 00 black si on February 07, 2010, 08:11:40 PM
 :yes:
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: mycarslow on February 07, 2010, 08:35:45 PM
is that how it works tho ? like you got the 2 hose from each pump then a Y but what size is the steel line ? i would think 8 an would be big enough right? pretty much im askin what size is you line
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: boosted 00 black si on February 08, 2010, 12:22:40 AM
iiiiiiii
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: crxvtec91 on February 08, 2010, 12:37:33 AM
Pops when is the retune?
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: boosted 00 black si on February 08, 2010, 12:38:58 AM
real soon steve i hope i'm shotting for 32 psi  :noel: i wanna be at the track for march all i got left to do is just finsh up the fuel set up and get the intake manifold on and redo the ic piping on the passenger side for the new manifold
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: mycarslow on February 08, 2010, 12:53:51 AM
yeah im hoping to get a spare stock pump hanger and see what i can fab up my plan is to run -8 or -10 feed and -6 return line but what ever a can find cheap ill use lol thanks for the info  :noel:
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: boosted 00 black si on February 08, 2010, 01:01:50 AM
i got one just pay for shipping and its urs
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: mycarslow on February 08, 2010, 01:04:22 AM
lol ill let you know asap i boy might have one layin around

forgot to ask is there much wireing to do with the twins?
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: ryan89crx on February 08, 2010, 01:46:57 AM
Dual Walbros for 850cc injectors? Seems a little overkill.
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: boosted 00 black si on February 08, 2010, 01:58:37 AM
i got everything very cheap  :noel:

fittings free
aeromotive fuel filter free
dual walbros set up 230  bucks
850cc injectors 70 bucks
-6 line 16 feet 50 bucks
-10 line 16 feet 50 bucks = 400  for everything
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: boosted 00 black si on February 08, 2010, 02:04:43 AM
lol ill let you know asap i boy might have one layin around

forgot to ask is there much wireing to do with the twins?

no not really i did the wiring so its plug and play with my stock connector  8)


Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: mycarslow on February 21, 2010, 09:00:42 PM
whats going on with this fucking car
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: PhilStubbs on February 21, 2010, 09:27:03 PM
lol ill let you know asap i boy might have one layin around

forgot to ask is there much wireing to do with the twins?

no not really i did the wiring so its plug and play with my stock connector  8)




are you running 2 walbro's on the stock wiring? i would really consider an upgrade there.
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: boosted 00 black si on February 21, 2010, 11:52:33 PM
whats going on with this fucking car
almost done just got to do the rewire on the pumps, reweld the ic piping and get a retune almost done  :noel:

yes i decided to just do the rewire
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: HiProfile on February 27, 2010, 03:39:48 AM
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/fuil-1.jpg)

Srsly? Anyone else notice the doubled-up clamps on the right?

All that's needed is a plate, a block, a tube (return), holes in the appropriate spots, and gasoline-safe sealant. But you definately got a deal on that stuff.
Title: Re: Project 10 second SI updated 1/10 with full blown dual walbro set up
Post by: boosted 00 black si on March 01, 2010, 07:01:29 PM
iiiiiii
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: Joseph Davis on March 14, 2010, 01:02:36 PM
Dual Walbros for 850cc injectors? Seems a little overkill.

Yup.  I wouldn't do all that extra work, either, good deal or no.
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: boosted 00 black si on March 14, 2010, 04:37:47 PM
picked this revhard intake manifold up the other day for 100 bucks  :noel:


(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/mani.jpg)

Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: crxvtec91 on March 15, 2010, 01:33:48 PM
Damn bro you always get some crazy deals.
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: Gold DA9 on March 15, 2010, 04:20:02 PM
wish i could find deals like you.  Nice looking build. I have a friend that bought some used probe pistons and eagle rods. He assembled the block and the pistons had play so he took it apart. Im tempted to snatch up those pistons. Let me see if i can have him send me the video, so i can post it in another thread. Not trying to thread jack your bu build thread.
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: boosted 00 black si on March 15, 2010, 07:00:54 PM
i got the manifold from a guy that had a turbo honda back in 06 the manifold was just sitting in his basement since so i pick it up off him along with a DART block
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: crxvtec91 on March 15, 2010, 11:03:58 PM
i got the manifold from a guy that had a turbo honda back in 06 the manifold was just sitting in his basement since so i pick it up off him along with a DART block

WTF now you have a dart block to? How much you steel that off him for?
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: widebody93 on March 16, 2010, 02:09:18 AM
SOLID setup I think!
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: boosted 00 black si on March 17, 2010, 11:25:25 AM
the dart block is for the next build  :noel:
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: boosted 00 black si on March 17, 2010, 11:25:56 AM
SOLID setup I think!


thanx
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: Joseph Davis on March 17, 2010, 11:26:35 AM
NA, I hope.
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: rease3 on April 08, 2010, 12:44:14 PM
nice setup you got there. what is the fastest u ran so far or this ya first build. nice fuel setup should feed those injectors nice.
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: crxvtec91 on April 08, 2010, 04:16:29 PM
Its done the nog just needs to post pic's!
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: boosted 00 black si on April 08, 2010, 10:43:50 PM
ok change of plans i pulled the dual walbro set up off the car because i picked up a sleeved block for dirt cheap so i'm saving the dual pump set up for the 700hp+ build coming soon  :noel: now its got a single 255 walbro in with the 850 injectors  along with the intake manifold and 70mm throttle body..the car is getting tuned on race gas in 2 weeks  8)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/get-attachment-1.jpg)


(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/get-attachment-2.jpg)


(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/get-attachment-3.jpg)
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: boosted 00 black si on April 08, 2010, 10:48:41 PM
nice setup you got there. what is the fastest u ran so far or this ya first build. nice fuel setup should feed those injectors nice.

no times yet everytime i went to the track something went wrong the first time i took it the boost controller was fucked up the second time i took it the trans wouldnt shift into second but i got that shit all fixed now  :noel:
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: boosted 00 black si on April 08, 2010, 10:49:09 PM
shit i haven't checked this thread in a while.
looking good man

thanx man
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: boosted 00 black si on April 08, 2010, 10:50:10 PM
Its done the nog just needs to post pic's!

yup steve its up and running and pics are up  ;D ripper vids coming soon just waiting for a friend to bring the dealer plate over on wednesday  :noel:
Title: Re: Project 10 second SI updated 2/7 with full blown dual walbro set up
Post by: crxvtec91 on April 09, 2010, 02:05:18 PM
Its done the nog just needs to post pic's!

yup steve its up and running and pics are up  ;D ripper vids coming soon just waiting for a friend to bring the dealer plate over on wednesday  :noel:

oh your so lucky. Do i get a ride?
Title: Re: Project 10 second SI updated 4/8 done ready for tunning
Post by: boosted 00 black si on April 09, 2010, 06:21:13 PM
yea i'll take u 4 a rip swing down u know were i live i'll let u know what time  :yes:
Title: Re: Project 10 second SI updated 4/8 done ready for tunning
Post by: crxvtec91 on April 09, 2010, 10:24:46 PM
yea i'll take u 4 a rip swing down u know were i live i'll let u know what time  :yes:

Hahaha oh yes :noel: ill make sure to bring something to film it.
Title: Re: Project 10 second SI updated 4/8 done ready for tunning
Post by: widebody93 on April 09, 2010, 11:54:34 PM
AN DAN?
Title: Re: Project 10 second SI updated 4/8 done ready for tunning
Post by: crxvtec91 on April 25, 2010, 03:02:09 AM
rip.........
Title: Re: Project 10 second SI updated 4/8 done ready for tunning
Post by: crxvtec91 on April 25, 2010, 01:32:15 PM
The nog been running 25psi for a few days, yet this happens while just crusing.....

(http://i971.photobucket.com/albums/ae195/crxvtec91/139776102_3733_.jpg)

(http://i971.photobucket.com/albums/ae195/crxvtec91/139776102_3732_.jpg)

(http://i971.photobucket.com/albums/ae195/crxvtec91/139776102_3731_.jpg)

(http://i971.photobucket.com/albums/ae195/crxvtec91/139776102_3730_.jpg)

(http://i971.photobucket.com/albums/ae195/crxvtec91/139776102_3729_.jpg)

Sleeved block.
(http://i971.photobucket.com/albums/ae195/crxvtec91/139776102_3735_.jpg)

(http://i971.photobucket.com/albums/ae195/crxvtec91/139776102_3734_.jpg)
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: glustic on April 25, 2010, 01:46:25 PM
Fuck man, always get tuned before you drive the bitch. Do you even have a wideband?
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: crxvtec91 on April 25, 2010, 01:51:45 PM
Fuck man, always get tuned before you drive the bitch. Do you even have a wideband?

Wasnt that, take another guess. Oh and there is no cheap cdm parts in his engine bay.
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: narfdanarf on April 25, 2010, 02:25:25 PM
what valves/springs did it have?
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: crxvtec91 on April 25, 2010, 02:27:48 PM
what valves/springs did it have?

I believe it was all oem itr. boosted 00 black si has to confirm that.
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: boosted 00 black si on April 25, 2010, 04:30:12 PM
Fuck man, always get tuned before you drive the bitch. Do you even have a wideband?

yes i do have a wideband i've had it for five years just put a new 02 sensor on it  >:(
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: boosted 00 black si on April 25, 2010, 04:39:15 PM
what valves/springs did it have?

yes type r valve springs and retainers when it broke i wasnt even beating on it i was driving normal!
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: boosted 00 black si on April 25, 2010, 04:47:04 PM
what valves/springs did it have?

I believe it was all oem itr. boosted 00 black si has to confirm that.

thanks for the ls block and taking those pics last night for me steve. i decided to go with a ls vtec piston and rod set up for now

 i'm saving that sleeved block for something else  :noel:
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: PhilStubbs on April 25, 2010, 04:55:34 PM
25psi on stock springs? eeek
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: mycarslow on April 25, 2010, 05:12:28 PM
Wish I was a fucking baller
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: glustic on April 25, 2010, 06:13:27 PM
what valves/springs did it have?

yes type r valve springs and retainers when it broke i wasnt even beating on it i was driving normal!

shit man. how many miles did they have on them?
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: boosted 00 black si on April 25, 2010, 06:15:32 PM
i bought them new when i built the motor so about 4000 miles
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: crxvtec91 on April 25, 2010, 06:21:36 PM
what valves/springs did it have?

I believe it was all oem itr. boosted 00 black si has to confirm that.

thanks for the ls block and taking those pics last night for me steve. i decided to go with a ls vtec piston and rod set up for now

 i'm saving that sleeved block for something else  :noel:

Your welcome. Oh nice, lmk if you need anything for the rebuild.
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: glustic on April 25, 2010, 06:23:25 PM
i bought them new when i built the motor so about 4000 miles

How the fuck?
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: boosted 00 black si on April 25, 2010, 06:53:48 PM
yeah i'm pretty sure it jumped timing cause when i check the cam gears after it blew up the exhaust cam gear mark was facing the fire wall
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: HiProfile on April 25, 2010, 07:17:48 PM
Be optimistic:

Why run a b16 when you have a sleeved b18 block? :yes:
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: crxvtec91 on April 25, 2010, 07:23:00 PM
Be optimistic:

Why run a b16 when you have a sleeved b18 block? :yes:

Because 25psi from a Holset and 10k will turn you out :noel:
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: Pootie on April 25, 2010, 08:58:07 PM
damn sucks.. get that thing back up and running!!

hope all goes well with the rebuild.
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: crxvtec91 on April 26, 2010, 09:36:26 PM
The nog got some new parts. He holding out :noel:
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: boosted 00 black si on April 27, 2010, 04:05:57 PM
the rebuild is in the works
got a new block done already

new set up

ls block bored .20 over
je 9:1 pistons
pauter rods
balanced and polished crank
acl bearings

working on getting a b16 head
ordering a full set of manley valves next week
i already got the valve springs and retainers (skunk 2)

also picked up a ball bearing turbo the holset is for sale now  :noel:
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: glustic on April 27, 2010, 04:08:30 PM
Damn son. Someone has a nice bank roll. Looking forward to this.
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: boosted 00 black si on April 27, 2010, 04:11:19 PM
nah i'm poor  :( n i work 7 days a week  :mexi:
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: boosted 00 black si on April 27, 2010, 04:13:52 PM
i bought the block from a friend at the machine shop he worked a payment plan out with me  :noel:
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: Eggylshatch on April 27, 2010, 04:15:09 PM
sorry about the engine, but how much for the holset?  and what size is that exhaust housing?
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: boosted 00 black si on April 27, 2010, 04:30:23 PM
12cm i'll take 340 shipped for it and if u want pics of the turbo and the port work its on the first page
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: crxvtec91 on April 30, 2010, 10:54:39 AM
Add;

http://www.realhomemadeturbo.com/forum/index.php?topic=435.msg5800#msg5800 (http://www.realhomemadeturbo.com/forum/index.php?topic=435.msg5800#msg5800)
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: Joseph Davis on May 02, 2010, 10:01:01 AM
yeah i'm pretty sure it jumped timing cause when i check the cam gears after it blew up the exhaust cam gear mark was facing the fire wall

No, this is not what happened.  When you jump time enough to bang a valve, you bang all of them in all the cylinders.  However, when you stave some valves into a piston, it's not uncommon to jump time between the increase in force between cam and crank and the engine loading/unloading as this happens.

The most likely answer is either simple mechanical failure of an OEM part taken beyond it's limits - whether you were cruising or not at the moment of failure has exactly jack and shit to do with what the valve has been through and any metal fatigue it's undergone.  The other alternative, very likely, is that the head had a bent valve at some point that cracked a guide.  Valve gets replaced, guide is still fucked up and the replacement valve hangs open and fucks some shit up.
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: Joseph Davis on May 02, 2010, 10:02:42 AM
Also, I'd rather have Ferrea valvetrain than anything.  Nothing against Manley, but their shit hasn't been around as long to know wtf is up with it, and the slight chance they sell repackaged KMS/Supertech/china makes me queasy.
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: boosted 00 black si on May 02, 2010, 10:07:38 AM
yeah i'm pretty sure it jumped timing cause when i check the cam gears after it blew up the exhaust cam gear mark was facing the fire wall

No, this is not what happened.  When you jump time enough to bang a valve, you bang all of them in all the cylinders.  However, when you stave some valves into a piston, it's not uncommon to jump time between the increase in force between cam and crank and the engine loading/unloading as this happens.

The most likely answer is either simple mechanical failure of an OEM part taken beyond it's limits - whether you were cruising or not at the moment of failure has exactly jack and shit to do with what the valve has been through and any metal fatigue it's undergone.  The other alternative, very likely, is that the head had a bent valve at some point that cracked a guide.  Valve gets replaced, guide is still fucked up and the replacement valve hangs open and fucks some shit up.

i agree this is what my buddy at the machine told me to
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: boosted 00 black si on June 03, 2010, 11:29:22 AM
stock ls + 20psi coming soon
Title: Re: Project 10 second SI updated 4/25 she dead.........
Post by: crxvtec91 on June 03, 2010, 11:46:25 AM
stock ls + 20psi coming soon

Pic's nog PIC'S!
Title: Re: Project 10 second SI coming back
Post by: boosted 00 black si on June 03, 2010, 03:28:41 PM
soon steve im pulling the motor out the rex this weekend   
i'm just throwing this ls in the si for now untill i get done with the built motor  8)  should be fun   :noel:
Title: Re: Project 10 second SI coming back
Post by: h2a on June 03, 2010, 10:08:14 PM
Nice , keep posting
Title: Re: Project 10 second SI coming back
Post by: Teg2boo on June 04, 2010, 09:44:15 AM
I don't know what is your turbo, but I'm not sure the stock LS @ 20psi will last very long. :P

400hp on stock motor would be pimp tho  :noel:
Title: Re: Project 10 second SI coming back
Post by: boosted 00 black si on June 04, 2010, 07:18:24 PM
yes it will be pimp  but i havent decided what turbo im using yet  :-X
Title: Re: Project 10 second SI coming back
Post by: crxvtec91 on June 05, 2010, 12:20:59 AM
yes it will be pimp  but i havent decided what turbo im using yet  :-X

Blowing shit up is fun ;).

Pops I have a h1c you can use until you get the other motor done. Only problem is that it has no cold side housing for some reason :noel:
Title: Re: Project 10 second SI coming back
Post by: boosted 00 black si on June 06, 2010, 09:08:22 AM
steve ur the man when can i come get  :yes:
Title: Re: Project 10 second SI coming back
Post by: crxvtec91 on June 06, 2010, 02:04:41 PM
steve ur the man when can i come get  :yes:

Lmk hit me up :noel:
Title: Re: Project 10 second SI coming back
Post by: boosted 00 black si on June 08, 2010, 11:21:40 AM
yo steve give me a call i'm trying to come pick that turbo up 2day  :yes:
Title: Re: Project 11 second SI update 7/10
Post by: boosted 00 black si on July 10, 2010, 11:53:08 AM
picked these dsm 450's up for 20 bucks n this this 60-1 turbonetics ball bearing turbo.
 (http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/popr.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/popsss-2.jpg)

free stock ls motor out the rex
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pop-1.jpg)
Title: Re: Project 11 second SI update 7/10
Post by: crxvtec91 on July 10, 2010, 01:51:21 PM
Get it in already!
Title: Re: Project 11 second SI update 7/10
Post by: davidawg on July 10, 2010, 02:17:24 PM
picked these dsm 450's up for 20 bucks n this this 60-1 turbonetics ball bearing turbo. i got the turbo for 200 bucks off a friend  :noel:

you, have fantastic luck!
Title: Re: Project 11 second SI update 7/10
Post by: boosted 00 black si on July 11, 2010, 10:55:47 AM
yes steve its going together i pulled the motor out the rex..i still need arp headstuds and a 2.5 bar map
Title: Re: Project 11 second SI update 7/10
Post by: glustic on August 08, 2010, 02:51:22 PM
Updates?
Title: Re: Project 11 second SI update 7/10
Post by: crxvtec91 on August 08, 2010, 05:27:22 PM
Updates?

The nog got some big boost stock motor updates he is holding out on :noel:
Title: Re: Project 11 second SI update 7/10
Post by: schim187 on August 09, 2010, 04:04:26 AM
and then?...
Title: Re: Project 11 second SI update 7/10
Post by: boosted 00 black si on August 09, 2010, 07:21:31 AM
yup getting the valves adjusted today..im waiting for the valve cover gasket n axle seals to get here should be here today tho. ill update later with some pics
Title: Re: Project 11 second SI update 8/16
Post by: boosted 00 black si on August 16, 2010, 11:37:56 AM
she is almost done

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/ls4.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/ls.jpg)

school time
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/ls2.jpg)

and my pimp as headlight bulb
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/ls5.jpg)
Title: Re: Project 11 second SI update 8/16
Post by: boosted 00 black si on August 16, 2010, 11:40:51 AM
still havent took it for a rip yet having sum map sensor problems but i think i fixed it i'm getting a new chip later were see what happens
Title: Re: Project 11 second SI update 8/16
Post by: crxvtec91 on August 16, 2010, 03:24:14 PM
Do work  :noel:
Title: Re: Project 11 second SI update 8/16
Post by: boosted 00 black si on August 16, 2010, 10:14:53 PM
its fixed just put a 3 bar in its running 15psi feels pretty good
Title: Re: Project 11 second SI update 8/16
Post by: crxvtec91 on August 19, 2010, 06:53:20 PM
She need MOAR BOOST!
Title: Re: Project 11 second SI update 8/16
Post by: boosted 00 black si on August 20, 2010, 12:11:11 AM
yup it does i'm heading to the track 2mor lets see what it runs  :noel:
Title: Re: Project 11 second SI update 8/16
Post by: crxvtec91 on August 20, 2010, 11:10:03 PM
rip........
Title: Re: Project 11 second SI update 8/16
Post by: mycarslow on August 21, 2010, 11:29:54 AM
Lol did she blow??
Title: Re: Project 11 second SI update 8/16
Post by: boosted 00 black si on August 22, 2010, 09:30:26 AM
no turbo seals blew  :noel:
Title: Re: Project 11 second SI update 8/16
Post by: crxvtec91 on August 28, 2010, 12:11:23 AM
Post up nog, what she run?
Title: Re: Project 11 second SI update 8/16
Post by: boosted 00 black si on August 29, 2010, 04:03:12 AM
on the second run i got the car to hook pretty good in second gear n this happened it broke the sway bar link n fucked the hub all up to

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/ax.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/axx.jpg)

Title: Re: Project 11 second SI update 8/16
Post by: crxvtec91 on August 29, 2010, 01:10:15 PM
Damn solid work! :noel:
Title: Re: Project 11 second SI update 8/16
Post by: Ntrain2k on August 29, 2010, 01:20:09 PM
what was the 1st run?
Title: Re: Project 11 second SI update 8/16
Post by: ratcityrex on August 29, 2010, 04:00:58 PM
Wheel hop at all? any kind of traction bar on it? At any rate, welcome to making some real power!!
Title: Re: Project 11 second SI update 8/16
Post by: boosted 00 black si on August 29, 2010, 04:34:49 PM
the first run was a 13.5 with a shitty 60 foot.. the bf's drags i got on are def to small i ran out of forth gear like 10 feet before the clock so i just stood on the gas hitting the rev limit passing the clock..

nah no wheel hop. no traction bar either but looking to getting one of those soon first i need to get some slicks for this bitch  :noel: the second run the car hooked second pretty good then boom!!!!  i also lost my center cap n part of the axle must have kicked up n put a hole in my coolant hose also   >:(

Title: Re: Project 11 second SI update 8/16
Post by: narfdanarf on August 29, 2010, 04:40:04 PM
I'm not a real big believer in traction bars...with that said, I've never ran any spectacular times either. :P
Title: Re: Project 11 second SI update 8/16
Post by: ratcityrex on August 29, 2010, 04:43:55 PM
In ed/da its night and day difference with/without one.
Title: Re: Project 11 second SI update 8/16
Post by: boosted 00 black si on August 29, 2010, 04:45:53 PM
i use to have one on the car years back but took it off n sold cause i needed some cash at the time
Title: Re: Project 11 second SI update 8/16
Post by: glustic on September 08, 2010, 06:46:20 PM
God damn, you keep breaking shit! Looks sick though. Did you get new axles?

Not a bad run, and your fucking turbo took a shit? Time to switch it out for a hoslut!!!!!!!!!
Title: Re: Project 11 second SI update 8/16
Post by: boosted 00 black si on September 08, 2010, 11:13:07 PM
yea got it fixed n running pretty good i picked up a turbonetics t3/t04e off a friend for 200 bucks..im getting the 60-1 ball bearing rebuilt for my built motor.  im getting some gutted doors n sum 24.5 slicks for it n heading back to the track.. i turned the boost up to 17 psi n raced a srt 8 magnum with a 100 shot n m/t drags the other night got him by a half car i had some bald bf drags on i was spinning the shit out of them   :yes:

Dodge magnum vs turbo honda (http://www.youtube.com/watch?v=7K94iPkV-a4#normal)
Title: Re: Project 11 second SI update 8/16
Post by: crxvtec91 on September 09, 2010, 09:38:21 AM
yea got it fixed n running pretty good i picked up a turbonetics t3/t04e off a friend for 200 bucks..im getting the 60-1 ball bearing rebuilt for my built motor.  im getting some gutted doors n sum 24.5 slicks for it n heading back to the track.. i turned the boost up to 17 psi n raced a srt 8 magnum with a 100 shot n m/t drags the other night he got me by a half car i had some bald bf drags on i was spinning the shit out of them   :yes:

Dodge magnum vs turbo honda (http://www.youtube.com/watch?v=7K94iPkV-a4#normal)

Thats good shit :noel:
Title: Re: Project 11 second SI update 8/16
Post by: glustic on September 09, 2010, 04:49:43 PM
yea got it fixed n running pretty good i picked up a turbonetics t3/t04e off a friend for 200 bucks..im getting the 60-1 ball bearing rebuilt for my built motor.  im getting some gutted doors n sum 24.5 slicks for it n heading back to the track.. i turned the boost up to 17 psi n raced a srt 8 magnum with a 100 shot n m/t drags the other night he got me by a half car i had some bald bf drags on i was spinning the shit out of them   :yes:

Dodge magnum vs turbo honda (http://www.youtube.com/watch?v=7K94iPkV-a4#normal)

Thats good shit :noel:
Title: Re: Project 11 second SI update 8/16
Post by: crxvtec91 on October 02, 2010, 12:24:11 PM
WHeres the rippers! :noel:
Title: Re: Project 11 second SI update 8/16
Post by: boosted 00 black si on October 02, 2010, 08:22:23 PM
there coming
Title: Re: Project 11 second SI update 8/16
Post by: crxvtec91 on October 02, 2010, 11:47:07 PM
there coming

VID'S!!!!!!!!!!!1
Title: Re: Project 11 second SI update 8/16
Post by: boosted 00 black si on October 03, 2010, 07:11:59 AM
me and crxvtec91 went out the other night to do some ripper vids
stock ls running a little t3/to4e on wg spring (14.7psi)

1-3 gear

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/th_DSCN1080.jpg) (http://s182.photobucket.com/albums/x22/BigMotherfuckingTim/?action=view&current=DSCN1080.mp4)

2-4 gear

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/th_DSCN1075.jpg) (http://s182.photobucket.com/albums/x22/BigMotherfuckingTim/?action=view&current=DSCN1075.mp4)

3-4 and a little bit of 5th

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/th_DSCN1078.jpg) (http://s182.photobucket.com/albums/x22/BigMotherfuckingTim/?action=view&current=DSCN1078.mp4)
Title: Re: Project 11 second SI update ripper vids added 10/3
Post by: crxvtec91 on October 04, 2010, 12:39:22 PM
Vids look goo!
Title: Re: Project 11 second SI update ripper vids added 10/3
Post by: boosted 00 black si on October 04, 2010, 04:44:37 PM
yea they came out pretty good
Title: Re: Project 11 second SI update ripper vids added 10/3
Post by: Teg2boo on October 04, 2010, 07:17:00 PM
Not bad  ;D
Title: Re: Project 11 second SI update ripper vids added 10/3
Post by: boosted 00 black si on October 04, 2010, 09:55:46 PM
thanx
Title: Re: Project 11 second SI update ripper vids added 10/3
Post by: boosted 00 black si on October 20, 2011, 01:09:12 AM
fuck all the pics got deleted dammit
Title: Re: Project 11 second SI update ripper vids added 10/3
Post by: boosted 00 black si on October 20, 2011, 01:28:39 AM
before
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/ekkkkkkkk.jpg)

after
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/track11.jpg)

the victim stock ls motor
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/027-1.jpg)

motor in
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/009-1.jpg)

ic brakets made out of a old bed frame
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/014-1.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/016-1.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/013.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/015.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/021-1.jpg)

holslut
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/miaa.jpg)

had this flange made to go from t4 twin scroll to t3 twin scroll
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/hxx.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/hx3-1.jpg)

time for the twin scroll set up
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/hx1-1.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/hx.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/h2.jpg)

egay dual 44mm wastegates
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/alldone3.jpg)

all done
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/alldone2.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/alldone5.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/tiallll.jpg)


set up
stock ls
b16 trans
twin scroll topmount
holsut wh1c with a 14cm ex
egay dual 44mm wategates
2.5 ic piping all round
3 inch open dp
dsm 450's
255 walbro pump rewired


Title: Re: Project 11 second SI update ripper vids added 10/3
Post by: boosted 00 black si on October 20, 2011, 01:46:43 AM
went to the track got a pass in on the car i fucking missed 4th gear but still went 12.4@111 with a 1.7 60ft not bad for a stock ls ;) weighted the fucker to its 2460 with me in it i got a set of gutted doors with lexan windows i didnt put em on yet i want the car to run 11's as the car sits with power doors and windows and then throw the gutted doors on to see what it does but next week im hitting the track again and i will run a 11 second pass with this car  8)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/trackday.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/trackday2.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/trackday4.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/trackday5.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/trackday6.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/track10.jpg)
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/trackday8.jpg)
Title: Re: Project 11 second SI updated 10/19
Post by: crxvtec91 on October 20, 2011, 09:28:03 AM
She moving good!

Supra owns hate you 8)
Title: Re: Project 11 second SI updated 10/19
Post by: ratcityrex on October 20, 2011, 12:33:49 PM
FUCK YEAH!!!
Title: Re: Project 11 second SI updated 10/19
Post by: Joseph Davis on October 21, 2011, 09:11:31 AM
For the love of god ditch the tiny 450s and make some real power.
Title: Re: Project 11 second SI updated 10/19
Post by: crxvtec91 on October 21, 2011, 09:20:40 AM
For the love of god ditch the tiny 450s and make some real power.

He has fuel pressure crank up a lot to make up for it 8)
Title: Re: Project 11 second SI updated 10/19
Post by: Joseph Davis on October 21, 2011, 11:55:59 AM
Doesn't make that big of a difference.   :-X
Title: Re: Project 11 second SI updated 10/19
Post by: boosted 00 black si on October 21, 2011, 02:03:14 PM
Doesn't make that big of a difference.   :-X

yea i kno i got a set of 880's and a set of evo 560's  8) but right now i dont really care i'n trying to build a head for my built motor  8)
and run 11's as the car sits right now unless u would like to retune it jd  :)
Title: Re: Project 11 second SI updated 10/19
Post by: boosted 00 black si on October 28, 2011, 04:58:18 PM
ripper vids coming soon  :noel:
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: boosted 00 black si on October 29, 2011, 01:08:36 AM
2nd-4th
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/th_boost.jpg) (http://s182.photobucket.com/albums/x22/BigMotherfuckingTim/?action=view&current=boost.mp4)


1-4th
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/th_boost2.jpg) (http://s182.photobucket.com/albums/x22/BigMotherfuckingTim/?action=view&current=boost2.mp4)
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: crxvtec91 on October 29, 2011, 06:02:57 PM
Shit fucking moves! Damn my hand could stay steady recording it.
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: glustic on October 29, 2011, 10:38:51 PM
VERY FUCKING NICE SIR!!!!!!!
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: boosted 00 black si on November 18, 2011, 12:47:15 AM
hitting the track on sunday hopping for high 11's gonna put the gutted doors on to fuck it  :noel:

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/door1-1.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/door-1.jpg)
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: krazy4 on November 18, 2011, 03:48:50 AM
Sweet car!  :noel:
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: glustic on November 19, 2011, 02:09:50 PM
Damn I want my civic back
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: boosted 00 black si on November 20, 2011, 08:32:37 PM
Went 11.9@112  8)
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: krazy4 on November 20, 2011, 11:36:21 PM
Fuck yeah!
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: ratcityrex on November 21, 2011, 10:06:05 AM
thats moving pretty good! From the trap speeds and the et I would say you know how to drive the fuck out of that car, and it hooks. Whats your 60' ?
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: boosted 00 black si on November 21, 2011, 12:44:46 PM
yea the 60 foot was a 1.6 with the 24.5 slicks the car hooks pretty good  :noel:
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: Gold DA9 on November 21, 2011, 12:59:47 PM
damn i wish i could drive that fast
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: crxvtec91 on November 21, 2011, 01:40:47 PM
yea the 60 foot was a 1.6 with the 24.5 slicks the car hooks pretty good  :noel:

FUCK YEA!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: glustic on November 21, 2011, 01:47:07 PM
Damn I want my civic back

Guess I was predicting the future...

FUCK HELPING OUT FAMILY


Title: Re: Project 11 second SI updated rippers added 10/29
Post by: crxvtec91 on January 09, 2012, 11:08:31 AM
DO WORK!
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: boosted 00 black si on January 09, 2012, 09:08:30 PM
Fuck you
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: Teg2boo on January 10, 2012, 09:43:25 AM
I hate winter. I want a boosted car back.
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: boosted 00 black si on January 10, 2012, 08:24:40 PM
what happened to urs?????
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: boosted 00 black si on January 28, 2012, 07:50:42 PM
The holslut took a shit 2day dammit time for a rebuild :noel:
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: ratcityrex on January 29, 2012, 01:29:33 AM
What happened to it?
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: crxvtec91 on January 29, 2012, 02:12:27 AM
What happened to it?

Rapping it like no other :evil:
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: boosted 00 black si on January 29, 2012, 11:31:27 AM
What happened to it?

leaking oil out the compressor side of the turbo ima send it out to get rebuilt in 2 weeks
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: boosted 00 black si on March 05, 2012, 04:30:43 PM
E85
dual walbro's coming soon  :noel:
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: crxvtec91 on March 05, 2012, 04:44:25 PM
E85
dual walbro's coming soon  :noel:

DO WORK!
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: robus on March 06, 2012, 06:29:55 AM
What happened to it?

leaking oil out the compressor side of the turbo ima send it out to get rebuilt in 2 weeks
what's your oil drain size? if too small that could be a problem.
Holset requirements are at least 19mm or 3/4" i.d.
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: boosted 00 black si on March 06, 2012, 05:16:31 PM
its a -10an and that isn't the problem but thanks
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: jdmhatchracer94 on March 06, 2012, 11:24:59 PM
still on the stock ls?
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: crxvtec91 on March 06, 2012, 11:42:53 PM
still on the stock ls?

Stock with arp head studs running 20psi for about 5,000 miles :noel:
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: boosted 00 black si on March 07, 2012, 10:13:21 PM
22psi coming soon :noel:
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: jdmhatchracer94 on March 07, 2012, 11:36:51 PM
awsome
Title: Re: Project 11 second SI updated rippers added 10/29
Post by: boosted 00 black si on March 17, 2012, 12:01:24 PM
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/e85.jpg)

e85 set up
255 external walbro
-6 fuel lines
relay kit
850cc injectors
basemap
Title: Re: Project 11 second SI E85 coming soon!!
Post by: hondaman94 on March 18, 2012, 12:31:45 AM
Fuck yea!

Steven and I were about to go down and give you a hand but had to swap out my pump that died.
Title: Re: Project 11 second SI E85 coming soon!!
Post by: 92CXyD on March 18, 2012, 11:35:12 AM
Fuck yea!

Steven and I were about to go down and give you  head but had to swap out my pump that died.

Alright what kind of gay shit this?

Steve I did not know you swing this way, and you have a partner.









JK



Title: Re: Project 11 second SI E85 coming soon!!
Post by: Eggylshatch on March 18, 2012, 04:39:14 PM
are 850cc injectors big enough for e85 and the kind of boost you're running?  I don't know myself, but it seems like you'd be running something that size for just regular gasoline on 22psi?
Title: Re: Project 11 second SI E85 coming soon!!
Post by: Gold DA9 on March 18, 2012, 06:08:03 PM
He is also running two pumps. I think he should be good with a base fuel pressure of like 50-55psi.

Hope to see this down in NC.
Title: Re: Project 11 second SI E85 coming soon!!
Post by: boosted 00 black si on March 18, 2012, 08:20:39 PM

[/quote]
He is also running two pumps. I think he should be good with a base fuel pressure of like 50-55psi.

Hope to see this down in NC.

yea ima try to make it this year couldnt get the car done in time last year
Title: Re: Project 11 second SI E85 coming soon!!
Post by: crxvtec91 on March 18, 2012, 10:12:31 PM
Fuck yea!

Steven and I were about to go down and give you  head but had to swap out my pump that died.

Alright what kind of gay shit this?

Steve I did not know you swing this way, and you have a partner.









JK

Damn you Russ lol
Title: Re: Project 11 second SI E85 coming soon!!
Post by: HiProfile on March 19, 2012, 01:29:42 PM
Max on a honda with 55psi/850cc/E85 will be around 525whp. Most I'd do is 475whp. Just don't crank the base pressure with those injectors. That Delphi style doesn't like it much.
Title: Re: Project 11 second SI E85 coming soon!!
Post by: boosted 00 black si on March 23, 2012, 03:30:01 AM
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/e85a.jpg)
Title: Re: Project 11 second SI E85 coming soon!!
Post by: crxvtec91 on March 23, 2012, 11:17:46 AM
I like that!
Title: Re: Project 11 second SI E85 coming soon!!
Post by: boosted 00 black si on March 25, 2012, 05:45:33 AM
255 external walbro
12 feet -6 fuel lines
850 injectors
relay kit
an fittings
basmap

total cost 160 bucks  :noel:

just gotta wire up the external and put the injectors in  :noel:

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pump10.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pump7.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pump6.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pump5.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pump9.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pump4.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pump8.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pump3.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pump2.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pump141.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pump1.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/pump.jpg)
Title: Re: Project 11 second SI E85 coming soon update 3/25/12!!
Post by: crxvtec91 on March 25, 2012, 10:06:52 AM
Now that looks good! How much of the 12 feet you have left?
Title: Re: Project 11 second SI E85 coming soon update 3/25/12!!
Post by: boosted 00 black si on March 25, 2012, 11:00:18 AM
9 feet maybe a lil more
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: boosted 00 black si on April 09, 2012, 02:47:28 AM
going to the dyno on tuesday  :noel:
will post updates while on the dyno  8)
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: ratcityrex on April 09, 2012, 12:32:06 PM
fuck yeah!
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: crxvtec91 on April 09, 2012, 02:46:19 PM
Im dieing to see how much its going to make!
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: boosted 00 black si on April 10, 2012, 07:09:11 PM
330hp and 345tq shit put some nice torque  :noel:
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: PhilStubbs on April 10, 2012, 09:30:04 PM
That's some serious torque
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: turbohf on April 10, 2012, 10:00:45 PM
it have cams? i have some forsale... :Jew:
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: ratcityrex on April 10, 2012, 11:54:36 PM
Awesome tq. I'm guessing the tq falls off on the top. So its probably not breathing to its full potential. It needs something.
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: jdmhatchracer94 on April 11, 2012, 02:28:10 AM
damn nice man. I didn't even brake 300tq on 18psi. damn you. never did say where u got the manifold.
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: ratcityrex on April 11, 2012, 11:26:44 AM
I want to see some dyno sheeeeeeet action!
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: boosted 00 black si on April 11, 2012, 05:02:01 PM
got the manifold from a local guy he didnt even know..
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: boosted 00 black si on April 11, 2012, 05:13:18 PM
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/dyno-1.jpg)
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: boosted 00 black si on April 11, 2012, 05:38:40 PM
damn nice man. I didn't even brake 300tq on 18psi. damn you. never did say where u got the manifold.

yea man i was surprised on how much tq it made
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: ratcityrex on April 11, 2012, 05:54:54 PM
Yeah, your choking out on the top end for sure. Cams foo! But awesome tq. It reads just like my dyno sheeeet when I maxed out my turbo. It just wouldn't flow any more and flattened out just like yours.
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: boosted 00 black si on April 11, 2012, 07:53:32 PM
Yea prob but ima just it where its at for now but i took it for a rip wen i got home and it :noel: :noel: roast the tires all the way thru 3rd
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: ratcityrex on April 11, 2012, 09:57:05 PM
Well, have fun trying to get traction! I bet it screams!
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: Teg2boo on April 12, 2012, 08:21:07 AM
All this torque at 4500rpm! LOL Awesome car in the traffic ;)

Did I say that I love the LS? Fuck yo vtac

Even if I own one with vtec now...
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: crxvtec91 on April 12, 2012, 09:52:54 AM
All this torque at 4500rpm! LOL Awesome car in the traffic ;)

Did I say that I love the LS? Fuck yo vtac

Even if I own one with vtec now...

His built motor is coming soon, lets see how the vtec adds to it :evil:
Title: Re: Project 11 second SI E85 hitting the dyno 4/10
Post by: boosted 00 black si on April 14, 2012, 12:57:54 AM
1st-3rd
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/th_IMAG0340.jpg) (http://s182.photobucket.com/albums/x22/BigMotherfuckingTim/?action=view&current=IMAG0340.mp4)

2nd and little bit of 3rd
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/th_IMAG0341.jpg) (http://s182.photobucket.com/albums/x22/BigMotherfuckingTim/?action=view&current=IMAG0341.mp4)

Title: Re: Project 11 second SI E85 rippers vids added
Post by: 1991civicsi on April 14, 2012, 01:06:01 AM
 8)
Title: Re: Project 11 second SI E85 rippers vids added
Post by: boosted 00 black si on April 15, 2012, 08:55:47 AM
 8)
Title: Re: Project 11 second SI E85 rippers vids added
Post by: crxvtec91 on April 16, 2012, 09:35:50 PM
Fuck yea this thing rips! Fuck my camera shit sucks for night time recording!
Title: Re: Project 11 second SI E85 rippers vids added
Post by: boosted 00 black si on May 24, 2012, 07:23:19 PM
need a b16 head cheap!!!!
Title: Re: Project 11 second SI E85 rippers vids added
Post by: crxvtec91 on May 25, 2012, 09:49:09 AM
I may have something for you.
Title: Re: Project 11 second SI E85 rippers vids added
Post by: boosted 00 black si on May 26, 2012, 11:47:58 AM
lmk  :noel:
Title: Re: Project 11 second SI E85 rippers vids added
Post by: boosted 00 black si on December 02, 2012, 07:12:45 PM
 Went 11.6@118 2day :noel:
Title: Re: Project 11 second SI E85 rippers vids added
Post by: crxvtec91 on December 03, 2012, 10:21:56 AM
Shit was badass, you need more rpm or bigger slicks!
Title: Re: Project 11 second SI E85 rippers vids added
Post by: boosted 00 black si on December 08, 2012, 11:47:07 AM
Yea but its ok ima leave the ek the way it is runs good and strong :noel: gonna start putting some work in on the ef
Title: Re: Project 11 second SI E85 rippers vids added
Post by: crxvtec91 on December 10, 2012, 06:57:04 PM
Do work slacker! :noel:
Title: Re: Project 11 second SI E85 rippers vids added
Post by: boosted 00 black si on December 16, 2012, 12:02:45 AM
(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/58184E36-C05B-4365-BDF5-F1C4DD364D3B-1312-0000014235B39DC9.jpg)

(http://i182.photobucket.com/albums/x22/BigMotherfuckingTim/AF639DEE-1942-4596-9680-05A060666349-1312-00000140DBDFD3F3.jpg)
Title: Re: Project 11 second SI E85 rippers vids added
Post by: crxvtec91 on December 16, 2012, 03:46:02 PM
Oh yea! Crx looks good back there :noel:
Title: Re: Project 11 second SI E85 rippers vids added
Post by: Ntrain2k on December 16, 2012, 05:38:36 PM
Oh yea! Crx looks good back there :noel:

I know that car....

 8)
Title: Re: Project 11 second SI E85 rippers vids added
Post by: boosted 00 black si on February 05, 2016, 02:04:05 PM
updated took the car off the road was paying for insurance every month n i was barely driving it
the car is still same stock ls on e85 on 22psi  original factory headgasket  with arp's the car sat all year in 2013 went to 1 event went to 2 events in 2014 but did 11.5@117 :noel:
in 2015 fixed a bunch of shit took it to maryland cecil dragway in dec went 11.5@115 had a prob with the car was pulling left out the hole n havin some wheel spin in 1st and 2nd she got more in her 8) will update some pics later n vid
Title: Re: Project 11 second SI E85 rippers vids added
Post by: crxvtec91 on February 05, 2016, 05:54:08 PM
Do work slacker!
Title: Re: Project 11 second SI E85 rippers vids added
Post by: boosted 00 black si on February 05, 2016, 06:28:23 PM
Steve the rex better be ready nxt month u got the nxt lane
Title: Re: Project 11 second SI E85 rippers vids added
Post by: crxvtec91 on February 07, 2016, 11:56:18 AM
Steve the rex better be ready nxt month u got the nxt lane

I'm going to run you on low boost just to give you a chance.