Topic: Which valves to use for ls head? (Read 10622 times)

jdmhatchracer94 · « **on:** June 16, 2010, 07:19:30 PM »

at the dyno day JD and i were takin intake valves for the ls I believe it was the prelude b21a1 motor was said to be larger but same length? I looked up on napa website and the b21a1 valves are:

head diameter: 32.995mm
lenght: 104.394 mm

B18b:
Head diameter: 31.09
lenght: 105.537

thats all I can find does anyone know which valves are the right one?

chris · « **Reply #1 on:** June 16, 2010, 07:45:16 PM »

Jd is the only one Im sure who has dove into this on this board. Make sure you do bowl work to match the valves on the head!

jdmhatchracer94 · « **Reply #2 on:** June 16, 2010, 11:39:20 PM »

I am gonna have a shop to everything just need to remember which ones

civiceggturbo · « **Reply #3 on:** June 20, 2010, 09:10:00 PM »

its not cost effective if you are not the one doing it because you will need larger seats installed, I am planning on giving it a try but it has been put on the back burner, but the b21a1 is what i have written down to work and is what i plan on using

Joseph Davis · « **Reply #4 on:** June 25, 2010, 12:00:25 PM »

Quote from: civiceggturbo on June 20, 2010, 09:10:00 PM

its not cost effective if you are not the one doing it because you will need larger seats installed,

Eight seats at $5/per and install per seat is ~$3.50. Oh noes, not $70 after tax Especially since you had to pay nothing for some B20A/B21A1 valves. TOO MUCH

civiceggturbo · « **Reply #5 on:** June 26, 2010, 07:56:06 AM »

where the hell are you getting those prices 5.00 dollars a seats seams possible but 3.50 to cut the head for larger seats, heat the head and install the seats and cut the seat angles say a minimum of 3, maybe in china that cost 3.50 You still need to enlargen the bowls and by that time you could have just had a b16 head, but hey if you could find me a shop that would do it for your price it would be bad ass

lilpooh21186 · « **Reply #6 on:** June 26, 2010, 09:11:40 AM »

If they don't have a flow bench leave that bowl alone
p

Joseph Davis · « **Reply #7 on:** June 26, 2010, 09:21:05 AM »

Quote from: lilpooh21186 on June 26, 2010, 09:11:40 AM

If they don't have a flow bench leave that bowl alone
p

If you don't have a clue, don't comment?

jdmhatchracer94 · « **Reply #8 on:** June 28, 2010, 06:30:40 PM »

okay so got on majestic's site to order the seats but they dont show by engine code shows a prelude 2.0 and a 2.05 I assume it is the 2.05 but can anyone confirm?

civiceggturbo · « **Reply #9 on:** June 28, 2010, 07:30:37 PM »

measure the stock ls seat's od and id, add 2mm, see if those dimensions match the one listed

jdmhatchracer94 · « **Reply #10 on:** June 28, 2010, 10:42:27 PM »

doesn't list any. seriously you think I wouldn't have done that.

civiceggturbo · « **Reply #11 on:** June 29, 2010, 06:52:30 PM »

then why didnt you try to look up a seat with those dimensions

Joseph Davis · « **Reply #12 on:** June 30, 2010, 12:11:46 AM »

This thread makes me sad.

jdmhatchracer94 · « **Reply #13 on:** June 30, 2010, 10:39:10 PM »

it makes baby jesus cry

boosted wagon · « **Reply #14 on:** July 02, 2010, 06:32:03 AM »

What are you building?I just bought a P8R head for $75.

Towdogg · « **Reply #15 on:** July 02, 2010, 09:57:25 AM »

Quote from: boosted wagon on July 02, 2010, 06:32:03 AM

What are you building?I just bought a P8R head for $75.

Who is this nigger? Intro! NOW!

jdmhatchracer94 · « **Reply #16 on:** July 06, 2010, 05:13:54 PM »

no shit your intro sux so you should send me the p8r head to make up for your lack of intro

chris · « **Reply #17 on:** July 06, 2010, 05:29:40 PM »

Quote from: boosted wagon on July 02, 2010, 06:32:03 AM

What are you building?I just bought a P8R head for $75.

whoever sold it doesnt know the value of them. I have slanged p8r heads on ebay for 250+shipping

150 would be a fair deal for a p8r head

sepheroth86 · « **Reply #18 on:** August 06, 2010, 08:23:22 PM »

I have a P8R head sitting around.. no use for it..

Joseph Davis · « **Reply #19 on:** August 06, 2010, 08:48:30 PM »

Quote from: sepheroth86 on August 06, 2010, 08:23:22 PM

I have a P8R head sitting around.. no use for it..

You are a n00b, we have no use for you.

michigan_soler · « **Reply #20 on:** August 07, 2010, 02:26:47 AM »

Quote from: sepheroth86 on August 06, 2010, 08:23:22 PM

I have a P8R head sitting around.. no use for it..

Then give it to me... ill even come pick it up...

jdmhatchracer94 · « **Reply #21 on:** August 09, 2010, 03:42:57 PM »

damn didnt know people were still posting in this

chris · « **Reply #22 on:** August 10, 2010, 02:25:31 AM »

I say sell motor buy dohc zc.

sepheroth86 · « **Reply #23 on:** August 11, 2010, 11:17:43 AM »

Quote from: Joseph Davis on August 06, 2010, 08:48:30 PM

Quote from: sepheroth86 on August 06, 2010, 08:23:22 PM
I have a P8R head sitting around.. no use for it..

You are a n00b, we have no use for you.

I was a member of the previous hmt site for many years. So really I am not that n00b.. hell I was invited to this site by buk.

Joseph Davis · « **Reply #24 on:** August 11, 2010, 12:06:11 PM »

Quote from: sepheroth86 on August 11, 2010, 11:17:43 AM

Quote from: Joseph Davis on August 06, 2010, 08:48:30 PM
Quote from: sepheroth86 on August 06, 2010, 08:23:22 PM
I have a P8R head sitting around.. no use for it..

You are a n00b, we have no use for you.

I was a member of the previous hmt site for many years. So really I am not that n00b.. hell I was invited to this site by buk.

Really, we have no use for you.

ApexSilver06MR · « **Reply #25 on:** August 11, 2010, 01:17:16 PM »

Quote from: Joseph Davis on August 11, 2010, 12:06:11 PM

Quote from: sepheroth86 on August 11, 2010, 11:17:43 AM
Quote from: Joseph Davis on August 06, 2010, 08:48:30 PM
Quote from: sepheroth86 on August 06, 2010, 08:23:22 PM
I have a P8R head sitting around.. no use for it..

You are a n00b, we have no use for you.

I was a member of the previous hmt site for many years. So really I am not that n00b.. hell I was invited to this site by buk.

Really, we have no use for you.

jdmhatchracer94 · « **Reply #26 on:** August 11, 2010, 03:03:42 PM »

if I could find a complete dohc zc for decent price around here I would for my hatch

TTC · « **Reply #27 on:** August 11, 2010, 04:19:17 PM »

Quote from: sepheroth86 on August 06, 2010, 08:23:22 PM

I have a P8R head sitting around.. no use for it..

Seriously fucking final fantasy name? Get out more.

News:

Author Topic: Which valves to use for ls head? (Read 10622 times)

chris

civiceggturbo

civiceggturbo

civiceggturbo

civiceggturbo

chris

chris