:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: D15b7 92 DX hatch timing belt help  (Read 3907 times)

soontobeDA

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 615
D15b7 92 DX hatch timing belt help
« on: August 13, 2010, 01:49:35 AM »
my first time doing one so im alittle iffy.

I can't take off the crank pully so i wont be able to line the dot to the arrow on oil pump(do i need to do this?)

So far i put it to TDC and loosened the Adjuster and got the belt on (lining up the marks on gears UP and the two lines to the head)
sliped the belt on, and tighten the adjuster bolt down. 

It seems way too easy. I'm scared its off a tooth or two.  Any tips you guys can give me? Am i doing it right?



Logged

crttaz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1831
  • Old Wise One
Re: D15b7 92 DX hatch timing belt help
« Reply #1 on: August 13, 2010, 02:37:49 AM »
If you don't take the crank pulley off, you can't change the timing belt.
Logged
OG before the OG'#039#039s

soontobeDA

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 615
Re: D15b7 92 DX hatch timing belt help
« Reply #2 on: August 13, 2010, 02:49:19 AM »
it was acutally a hg job and friend took off his head without marking aynthing on gear/belt

the belt and waterpump is new so im not removing it
Logged

DasPoop

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1761
Re: D15b7 92 DX hatch timing belt help
« Reply #3 on: August 13, 2010, 07:42:38 AM »
move the crank just a little bit back from tdc then slip the belt on the head at tdc then rotate the crank forward to put some tension on the belt see where the crank lines up again if your a tooth off you will know it so slip the belt back of the cam move it and try again after you have tension on the front side of the belt then tighten the tensioner on the back and you should be set. sounds a lot harder than it really is only takes like 5 min
Logged
Na mike:"quotquotthe one i had was a real bbw, not just a fat chick, but a huge fat chick"quotquot

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6790
  • I look around and all I see is Smegheads
Re: D15b7 92 DX hatch timing belt help
« Reply #4 on: August 13, 2010, 08:27:56 AM »
Quote from: DasPoop on August 13, 2010, 07:42:38 AM
move the crank just a little bit back from tdc then slip the belt on the head at tdc then rotate the crank forward to put some tension on the belt see where the crank lines up again if your a tooth off you will know it so slip the belt back of the cam move it and try again after you have tension on the front side of the belt then tighten the tensioner on the back and you should be set. sounds a lot harder than it really is only takes like 5 min

That ais pretty much how I done 6 hg on b7/b8 jobs.
But you have to make sure everything lines up correctly and stay that way or will have to do it all over again.
Logged

DasPoop

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1761
Re: D15b7 92 DX hatch timing belt help
« Reply #5 on: August 13, 2010, 01:37:28 PM »
6 hgs wow and i thought i had my top end apart a lot  :o
Logged
Na mike:"quotquotthe one i had was a real bbw, not just a fat chick, but a huge fat chick"quotquot

soontobeDA

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 615
Re: D15b7 92 DX hatch timing belt help
« Reply #6 on: August 13, 2010, 02:16:27 PM »
thanks i think i did it wrong then

cuz the front of the belt is pretty loose and has no tension
Logged

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: D15b7 92 DX hatch timing belt help
« Reply #7 on: August 18, 2010, 08:14:00 PM »
Quote from: soontobeDA on August 13, 2010, 02:16:27 PM
thanks i think i did it wrong then

cuz the front of the belt is pretty loose and has no tension


i have that moroso t belt tool if you need to borrow it
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

soontobeDA

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 615
Re: D15b7 92 DX hatch timing belt help
« Reply #8 on: August 25, 2010, 06:21:51 PM »
oh koo thanks jay

But i got it all done

easy as cake car runs great now

thanks all
Logged

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: D15b7 92 DX hatch timing belt help
« Reply #9 on: August 25, 2010, 07:06:04 PM »
no problem.  yo. dyno is up in sac nigga.  whats good?
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog
Pages: [1]   Go Up
« previous next »