Topic: Wake up this morning to go to work, Delsol moved away (Read 4203 times)

civiceggturbo · « **on:** November 02, 2011, 05:17:26 AM »

I guess someone wanted it more than me, will be interesting to see if my parts end up on craigslist. Funny thing is that I went out to get my wallet out of it last night around 12 and almost said fuck it ill get it tomorrow. Rental hooptie ftw

Joseph Davis · « **Reply #1 on:** November 02, 2011, 06:38:24 AM »

97Econobox · « **Reply #2 on:** November 02, 2011, 07:12:09 AM »

Fuck Thieves. Hope you can get some of your shit back.

2slow · « **Reply #3 on:** November 02, 2011, 07:43:07 AM »

shitty deal man. I don't know what I'd do if that happened to me. I don't think people realize that cars for the most part are necessities nowadays.

ratcityrex · « **Reply #4 on:** November 02, 2011, 09:09:35 AM »

Pre paid phone hard wired in up under the dash on top of the heater vents with free tracking on the phone. I'll knock on there Fucking door, then pull the shotgun. Hope u get that shit back.

Gold DA9 · « **Reply #5 on:** November 02, 2011, 09:22:40 AM »

Quote from: ratcityrex on November 02, 2011, 09:09:35 AM

Pre paid phone hard wired in up under the dash on top of the heater vents with free tracking on the phone. I'll knock on there Fucking door, then pull the shotgun. Hope u get that shit back.

ive been thinking about do this once I start putting my car back together...

civiceggturbo · « **Reply #6 on:** November 02, 2011, 09:30:24 AM »

I used to have a quick disconnect steering wheel that I would bring inside every night, switched back to a honda one about a year ago....fail. Comical that my car never got touched once while living in Baltimore for two years, move back in with the rents in a much nicer area, car gets broken into once and now this. Hopefully, I get at least the shell back and don't get dicked by insurance too hard.

chris · « **Reply #7 on:** November 02, 2011, 11:57:39 AM »

swap,turbo?

civiceggturbo · « **Reply #8 on:** November 02, 2011, 12:01:11 PM »

b20b with p72 head, b16 trans
log mani that I made, starion intercooler w/ stock end tanks welded up and repositioned, MHI 16g, 470cc injectors, dual vw diverters flipped

civiceggturbo · « **Reply #9 on:** November 02, 2011, 08:09:41 PM »

so do receipts for parts get you any real money from insurance companies? have about 5k of legitimate receipts just in paint and parts, claim adjuster said to include everything I had, so Ill hope for the best even though I don't expect 5k total.

Jorsher · « **Reply #10 on:** November 02, 2011, 08:31:20 PM »

Quote from: n/a michael on November 02, 2011, 08:16:23 PM

usually you need to claim the parts before your car is stolen. they will come out and take pics then agree on a value of your car.

that shit sucks man, hope you don't get too raped by insurance.

Yep, with both Geico and Esurance (I haven't used any other company recently), they tell you to call to speak about coverage for aftermarket stuff. I wouldn't depend on receipts to get what you paid for it, unless someone hit you and you were dealing with their insurance.

civiceggturbo · « **Reply #11 on:** November 04, 2011, 11:04:25 PM »

filling out insurance report and pulling up all my receipts, spent way too much on the shit box over the years ha

will post new build soon, handle of jim beam 25 bones at the liquor store might prevent speedy post

patsmx5 · « **Reply #12 on:** November 05, 2011, 11:00:51 PM »

Quote from: ratcityrex on November 02, 2011, 09:09:35 AM

Pre paid phone hard wired in up under the dash on top of the heater vents with free tracking on the phone. I'll knock on there Fucking door, then pull the shotgun. Hope u get that shit back.

hmmmm..... Going to look into this, would be nice to have free tracking for my car.

slappynuts · « **Reply #13 on:** November 06, 2011, 09:45:17 AM »

Funny story. I busted my hosebag ex wife with the old phone under the seat.

ironcrx · « **Reply #14 on:** November 06, 2011, 01:01:37 PM »

Quote from: patsmx5 on November 05, 2011, 11:00:51 PM

Quote from: ratcityrex on November 02, 2011, 09:09:35 AM
Pre paid phone hard wired in up under the dash on top of the heater vents with free tracking on the phone. I'll knock on there Fucking door, then pull the shotgun. Hope u get that shit back.
hmmmm..... Going to look into this, would be nice to have free tracking for my car.

Best is with boost mobile.

civiceggturbo · « **Reply #15 on:** November 24, 2011, 05:30:49 PM »

Insurance is giving me 4700 for the hooptie, in the market for a truck to haul with
http://baltimore.craigslist.org/cto/2718531640.html

what ya think? stay away from the chevy 6.5L?

civiceggturbo · « **Reply #16 on:** November 24, 2011, 06:18:34 PM »

its not a duramax, its a GM motor, they didn't swap out to jap motors until later, for what I plan on doing I think it will be fine esp with relatively low miles

Joseph Davis · « **Reply #17 on:** November 24, 2011, 06:42:58 PM »

I SUCK

civiceggturbo · « **Reply #18 on:** November 24, 2011, 06:59:52 PM »

all good, I didn't know shit about diesels before the last week, still don't have a clue but Im trying to find something and not get screwed

Urban Indian · « **Reply #19 on:** November 24, 2011, 10:52:10 PM »

looks fairly decent

Passenger · « **Reply #20 on:** November 25, 2011, 09:19:01 PM »

One of the worlds worst (or most unreliable, whatever you want to call it) diesel engines ever made.

civiceggturbo · « **Reply #21 on:** November 25, 2011, 10:49:58 PM »

, but passanger hows your mat, my work just bought a 3 axis pallet changer, kinda week moves 1-1.5 in the z unless you warm it up for an hour at 15k.....super weak considering we dont do production work 24/7....and ofcourse the college kid is the one who gets to fuck with it. its has the whole "setup mode" which you have to be in handle to change tools and it door alarms eveytime, so you have to reset it everytime to change tools. Ps im hammered but i dislike the whole Mat/Fanuc control hybrid, need to reed more on it but, as per usual they bought the wrong machine for the shit we do, prob parameter change to avoid door alarm, but to set tools we use a macro g program---->betch face

ps jim beam da shit

civiceggturbo · « **Reply #22 on:** November 25, 2011, 10:51:56 PM »

change tools out of spindle not just changing tools, cheats?, id rather have a daewoo ftw

Passenger · « **Reply #23 on:** November 26, 2011, 04:43:20 PM »

Quote from: civiceggturbo on November 25, 2011, 10:49:58 PM

, but passanger hows your mat, my work just bought a 3 axis pallet changer, kinda week moves 1-1.5 in the z unless you warm it up for an hour at 15k.....super weak considering we dont do production work 24/7....and ofcourse the college kid is the one who gets to fuck with it. its has the whole "setup mode" which you have to be in handle to change tools and it door alarms eveytime, so you have to reset it everytime to change tools. Ps im hammered but i dislike the whole Mat/Fanuc control hybrid, need to reed more on it but, as per usual they bought the wrong machine for the shit we do, prob parameter change to avoid door alarm, but to set tools we use a macro g program---->betch face

ps jim beam da shit

A Matsuura? Which model, RA? Sounds like a Fanuc 31i. Door interlock could be as simple as a user parameter, some of the new ones you need to edit the ladder. It is likely an integral motor spindle which usually grow .0005-.002" during warm up. I have a couple machines with integral motor spindles and you just need to warm them up, for a couple grand you can buy the auto start ups that fire up the machine at your set time and run your warm up cycle. On a 15k and up spindle you really need a good warm up program, I'll take a picture of the warm up schedule for my cell later today.

Yes Jim Beam is shit, I recommend Makers Mark 46 or Glenfiddich 18

News:

Author Topic: Wake up this morning to go to work, Delsol moved away (Read 4203 times)

civiceggturbo

civiceggturbo

chris

civiceggturbo

civiceggturbo

civiceggturbo

civiceggturbo

civiceggturbo

civiceggturbo

civiceggturbo

civiceggturbo