:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Build thread database... check it. (link)

Pages: [1]   Go Down

Author Topic: how can u tell if injectors are bad or going bad?  (Read 3538 times)

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
how can u tell if injectors are bad or going bad?
« on: January 20, 2014, 06:46:15 PM »

Been having a ton of problems with this car. Pulled the manifold the other night and cylinder 1 2 4 all have white carbon on them very little but 3 has none. Like clean almost as if nothing was burning dunno any idea?

Just wondering if this could be a symptom.
« Last Edit: January 22, 2014, 02:09:21 AM by jdmhatchracer94 »
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: how can u tell if injectors are bad or going bad?
« Reply #1 on: January 24, 2014, 09:06:02 AM »

It's possible that's related to the injector. I've also seen weak fuel pumps cause all sorts of issues, and even bad injector clips giving intermittent fuel. It can even be the ecu, where channel #3 burned out.

Pull the rail out of the manifold, zip tie the injectors in, then put each injector into a plastic cup or bottle. Crank the motor over until several times and compare how much fuel is in each cup. That's the best place to start before throwing parts at it. A noid light clipped to the ecu wire (negative) while the injector is still connected will help diagnose some other possibilities.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

325i_csl

  • N00B *Read Intro Sticky*
  • *
  • Offline Offline
  • Posts: 1
  • RHMT
Re: how can u tell if injectors are bad or going bad?
« Reply #2 on: February 24, 2014, 10:00:03 AM »

Would suggest to have the injectors tested, cleaned, and re-tested. This might rule them out as the cause of your problems. If I remember correctly, not only the amount of fuel but also the spray pattern is of importance to the effectiveness of an injector.

Another guess would be to measure spark plug gap size if you recently changed your plugs.

Logged

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: how can u tell if injectors are bad or going bad?
« Reply #3 on: February 24, 2014, 05:10:23 PM »

Would suggest to have the injectors tested, cleaned, and re-tested. This might rule them out as the cause of your problems. If I remember correctly, not only the amount of fuel but also the spray pattern is of importance to the effectiveness of an injector.

Another guess would be to measure spark plug gap size if you recently changed your plugs.
[/quot

Way to late and who the fuck are you? Did you not read the noon post.
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

Joseph Davis

  • Verbal Assault Technician
  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: how can u tell if injectors are bad or going bad?
« Reply #4 on: March 15, 2014, 11:30:40 AM »

White carbon?  You mean burned oil?

DasPoop

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1761
Re: how can u tell if injectors are bad or going bad?
« Reply #5 on: March 16, 2014, 02:00:48 AM »

White carbon?  You mean burned oil?

Do you have pics of said "white carbon" I thought burned oil was more like a chalky brown.
Logged
Na mike:"quotquotthe one i had was a real bbw, not just a fat chick, but a huge fat chick"quotquot

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: how can u tell if injectors are bad or going bad?
« Reply #6 on: March 16, 2014, 10:52:00 PM »

It is mor like chalk but white 1 2 4 absoluty none in 3. I don't have pics should have taken some
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother
Pages: [1]   Go Up