:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

GET YOUR OFFICIAL REALHOMEMADETURBO.COM STICKERS! (link)

Pages: [1]   Go Down

Author Topic: 89 Accord, My Lx-R Gun Metal Gray Build  (Read 14691 times)

TWOLOUDnPROUD

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 23
89 Accord, My Lx-R Gun Metal Gray Build
« on: May 05, 2009, 09:33:41 AM »

Here my 89 Accord Lx-i ti's time to put some serious power in her so this is the beginning of my
 Lx-R Gun Metal Gray Build


1. B18a1 block bored to 81.5mm

2.SRP pistons 81.5mm 9:5:1cr

3.Crower Rod's

4.Zero Balanced Crank

5.1997 GSR Head p72 B18c1

6.1998 Type R cams

7. T04b V-trim (=62Trim) with stage II turbine with.63A/R

8. Mini ram horn header

9. Blox intake manifold 68.mm

10. 68mm TB

11.550cc injector's for break in then 880cc for the big power ;D

12. Stage 4 clutch & plate

13. Accel internal coil & 8.5mm wire's

14. 35mm wastegate.

15. ACL Race Barings rod & main

16. ARP main studs & head studs












« Last Edit: May 16, 2009, 06:14:08 PM by TWOLOUDnPROUD »
Logged

t_cel_t

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3147
Re: My Lx-R Gun Metal Gray Build
« Reply #1 on: May 05, 2009, 09:41:11 AM »

sweet, 4 dr turbo anything is awesome
Logged
malone labe

I think all cop cars need to have turbo. nbspnbsp Then they would understand the necessity of putting your foot down and how uncontrollable the urge is to fucking rail on that shit.

Rosario4124

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1563
  • HATE HATE HATE
Re: My Lx-R Gun Metal Gray Build
« Reply #2 on: May 05, 2009, 09:51:37 AM »

sweet
Logged

why would you not run it, it makes no sense. If there is a water cooled section it was designed to be run with it for cooling. Pretty sure garrett knows better then some fat guy in a accord. nbspnbsp :P

MantisX

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 362
Re: My Lx-R Gun Metal Gray Build
« Reply #3 on: May 05, 2009, 10:47:30 AM »

Nice build man. What color is that on the block?
Logged

TWOLOUDnPROUD

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 23
Re: My Lx-R Gun Metal Gray Build
« Reply #4 on: May 05, 2009, 11:45:52 AM »

Nice build man. What color is that on the block?
Gun Metal Gray
Logged

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: My Lx-R Gun Metal Gray Build
« Reply #5 on: May 05, 2009, 11:55:38 AM »

what you have to do to swap that in? My lil bro has a 88
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: My Lx-R Gun Metal Gray Build
« Reply #6 on: May 05, 2009, 01:21:44 PM »

Why are you gona spend money on the build and than put a block guard in? :'(

Self destruction is in order. Just ask jd how much he loves them.

Everything but the block guard looks great. Good luck with the build. What powers is youz shooutin 4?
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

TWOLOUDnPROUD

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 23
Re: My Lx-R Gun Metal Gray Build
« Reply #7 on: May 05, 2009, 01:41:37 PM »

what you have to do to swap that in? My lil bro has a 88
this
Logged

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note
Re: My Lx-R Gun Metal Gray Build
« Reply #8 on: May 05, 2009, 01:56:16 PM »

baller oil lines and wastegate vacume line real clean over all
Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6787
  • I look around and all I see is Smegheads
Re: My Lx-R Gun Metal Gray Build
« Reply #9 on: May 05, 2009, 02:07:11 PM »

Looks damn good. :yes: ;D :noel:

caged

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 364
Re: My Lx-R Gun Metal Gray Build
« Reply #10 on: May 05, 2009, 05:50:04 PM »

Loving the block in the oven :noel:. I did the same to my rocker cover and the mrs found it when she came home and wasnt happy lol
Logged
11.6@126mph 1993 mitsubishi GSR.

Blacksi

  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2060
Re: My Lx-R Gun Metal Gray Build
« Reply #11 on: May 05, 2009, 11:02:05 PM »

never seen anyone do a oil return like that looks solid
Logged

1991civicsi

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1946
Re: My Lx-R Gun Metal Gray Build
« Reply #12 on: May 05, 2009, 11:25:07 PM »

 :) cool brace on the turbo to block.
Logged
"quotquotThis ain'#039#039t no forum, its a gang.. "quotquot BigDaddyVtec

TWOLOUDnPROUD

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 23
Re: My Lx-R Gun Metal Gray Build
« Reply #13 on: May 06, 2009, 09:44:07 PM »

Why are you gona spend money on the build and than put a block guard in? :'(

Self destruction is in order. Just ask jd how much he loves them.

Everything but the block guard looks great. Good luck with the build. What powers is youz shooutin 4?
This is why i put a block guard.now for how much Hp i will wait and see what dyno tells me

« Last Edit: May 06, 2009, 09:48:30 PM by TWOLOUDnPROUD »
Logged

Towdogg

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2834
  • Cfm's don't roll through an air intake!
Re: My Lx-R Gun Metal Gray Build
« Reply #14 on: May 06, 2009, 10:32:45 PM »

That return is GANGSTA
Logged

Travis

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2271
Re: My Lx-R Gun Metal Gray Build
« Reply #15 on: May 07, 2009, 12:34:39 AM »

Whats the purpose behind the bracket off the block to the oil fitting?

BoostForLife

  • Guest
Re: My Lx-R Gun Metal Gray Build
« Reply #16 on: May 07, 2009, 02:40:52 AM »

Whats the purpose behind the bracket off the block to the oil fitting?
To support the manifold a little. That's an ebay SSAutochrome bullshit that will break off at the head flange pretty soon, at least that's what mine did.
Logged

DRQPQUT

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1529
Re: My Lx-R Gun Metal Gray Build
« Reply #17 on: May 07, 2009, 08:26:14 PM »

nice ass build ;) shit looks good
Logged

Evan

  • Full Member
  • ***
  • Offline Offline
  • Posts: 159
Re: My Lx-R Gun Metal Gray Build
« Reply #18 on: May 07, 2009, 08:40:36 PM »

moar!
Logged

BoostForLife

  • Guest
Re: My Lx-R Gun Metal Gray Build
« Reply #19 on: May 08, 2009, 01:38:00 AM »

didn't notice until now,
Nice ass baller waste gate line!
Logged

jarebear667

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1414
Re: My Lx-R Gun Metal Gray Build
« Reply #20 on: May 08, 2009, 11:16:58 AM »

i always get my pressure source after the intercooler.. but it will work there.
Logged
midwest HMT!

SloS13

  • RHMT Ex-President
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: I am a geek!!
  • My avatar is broken
Re: My Lx-R Gun Metal Gray Build
« Reply #21 on: May 08, 2009, 09:56:49 PM »

love it love it  :D
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: My Lx-R Gun Metal Gray Build
« Reply #22 on: May 09, 2009, 12:19:49 AM »

Upgraded cams, intake, throttle body, VC, and earls oil lines - all with an ssautofail manifold.

Seriously, wtf? The stock IM & head are enough for 400+, why spend all that money on shit before a decent turbo manifold?? Even if you got the parts above at crackhead prices, you still could have bought a decent [new] ramhorn instead.  :(
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

TWOLOUDnPROUD

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 23
Re: My Lx-R Gun Metal Gray Build
« Reply #23 on: May 09, 2009, 03:38:26 AM »

Upgraded cams, intake, throttle body, VC, and earls oil lines - all with an ssautofail manifold.

Seriously, wtf? The stock IM & head are enough for 400+, why spend all that money on shit before a decent turbo manifold?? Even if you got the parts above at crackhead prices, you still could have bought a decent [new] ramhorn instead.  :(
The wife bought it for my birthday and since i like sleeping in my bed so i will use it until it breaks then i will get a real ramhorn so until then im stuck with it :?: so anyone that has a wife will understand.Sometimes we have to sacrifice to keep the peace.
« Last Edit: May 09, 2009, 03:46:32 AM by TWOLOUDnPROUD »
Logged

d-rail

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1005
Re: My Lx-R Gun Metal Gray Build
« Reply #24 on: May 09, 2009, 03:53:33 AM »

Pretty sweet build but I would think you'd need some bigger injectors to hit anything above 350. I've got some never used RC 750cc injectors I'm trying to get rid of if you want. Let me know.
Logged

g_shok

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2210
  • SuperSport
Re: My Lx-R Gun Metal Gray Build
« Reply #25 on: May 11, 2009, 03:56:56 PM »

tight, not feeling all the blue tho
Logged
ride or die - smoke &ampamp fly
What I look forward to is continued immaturity followed by death.

onlyflash944

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2741
  • Jack of all trades, Master of none
Re: My Lx-R Gun Metal Gray Build
« Reply #26 on: May 11, 2009, 04:59:14 PM »

I want an accord hatchback




interesting oil return
Logged

You read some forums? nbspnbsp Cool, I tune cars.

  Its your fucking car, if you want to hack it up fucking go for it.

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: My Lx-R Gun Metal Gray Build
« Reply #27 on: May 12, 2009, 11:32:29 AM »

Sometimes we have to sacrifice to keep the peace.

That explains 2 things - 1) why you're using the manifold, 2) that you're a big pussy. Slap that bitch and tell her what's up already! "THIS IS RHMT, BITCH!!" :noel:
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

esi42

  • Guest
Re: My Lx-R Gun Metal Gray Build
« Reply #28 on: May 24, 2009, 07:29:20 AM »

The wife bought it for my birthday and since i like sleeping in my bed so i will use it until it breaks then i will get a real ramhorn so until then im stuck with it :?: so anyone that has a wife will understand.Sometimes we have to sacrifice to keep the peace.


 :yes: :yes: :yes: :noel:


And if its a 3geez,  the one to have is an Aerodeck

« Last Edit: May 24, 2009, 07:31:46 AM by esi42 »
Logged
Pages: [1]   Go Up