:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: problems installing differential  (Read 6705 times)

shoeboxbeater

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 14
  • RHMT
problems installing differential
« on: January 09, 2016, 01:58:45 PM »
I am having trouble getting the diff back in the case. It is not sliding in like it came out. What would cause the bearing to bind when I am putting the diff back in? The bearing is seated on the diff and I mic'ed both bearings and both are cocentric and the same size
Logged

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6789
  • I look around and all I see is Smegheads
Re: problems installing differential
« Reply #1 on: January 09, 2016, 06:53:45 PM »
Setup? :noel:
Logged

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: problems installing differential
« Reply #2 on: January 09, 2016, 08:35:52 PM »
the bearing is going to be a tight perfect fit. you need to make sure it goes in completely straight. good luck.

also, metal expands and contracts with heat and cold. so case warm, and bearings cold will be a help...
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

highroller54

  • I caught the fable Novacorn
  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10830
  • Spreading the rhmt word like PB&J
Re: problems installing differential
« Reply #3 on: January 10, 2016, 11:46:22 AM »
Going in not perfectly strait or a small burr or dirt/fuzz anything like that. Should go in pretty nice if everything is good.
Starting just a touch off and forcing it can make a burr pretty quick.
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: problems installing differential
« Reply #4 on: January 16, 2016, 11:45:59 PM »
I use a rubber malet and tap around till it drops I
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

shoeboxbeater

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 14
  • RHMT
Re: problems installing differential
« Reply #5 on: May 24, 2016, 04:47:06 PM »
Thanks for the input. New bearings solved the problem. Also the differential is an obx version 2 which needed machined  a total of .054 thou equating to .027 thousands on each side so it could be properly shimmed. So far I have put 6000 miles on this diff with no problems as of yet. I am not driving like your grandmother would. About 50 1/4 mile passes also. This is in a 99 hydro b16 transmission. Thanks again
Logged
Pages: [1]   Go Up
« previous next »