:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

GET YOUR OFFICIAL REALHOMEMADETURBO.COM STICKERS! (link)

Pages: [1]   Go Down

Author Topic: which head is better pm3 or pm8  (Read 5343 times)

turboblack2door

  • Full Member
  • ***
  • Offline Offline
  • Posts: 129
which head is better pm3 or pm8
« on: September 13, 2009, 11:26:31 AM »
I am swapping motors in my dd beater. I have a d15b7(pm8) and a d15b2(pm3) the b2 has bad valves and a good bottom end and the b7 has a good head and a broken piston. Which would be best for my to4e 50trim dd?
Logged
93 Honda Civic Del Sol -F22A6, H22 trans, Bisi rods, Aris pistons, Hondata S300, 1200cc RC injectors, e85, Koni Yellows, Ground Controls, fuck my expensive hobby

chris

  • Guest
Re: which head is better pm3 or pm8
« Reply #1 on: September 13, 2009, 03:42:25 PM »
same head
Logged

ryan89crx

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3228
  • 20lbs of love!
Re: which head is better pm3 or pm8
« Reply #2 on: September 13, 2009, 04:21:21 PM »
same head, different cam/springs
Logged
d-series on 20 pounds will turn you out!

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: which head is better pm3 or pm8
« Reply #3 on: September 13, 2009, 06:09:26 PM »
Quote from: ryan89crx on September 13, 2009, 04:21:21 PM
same head, different cam/springs

Would you happen to know the details on the difference between the two?
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: which head is better pm3 or pm8
« Reply #4 on: September 13, 2009, 07:29:03 PM »
One sucks, the other sucks hard.
Logged

crttaz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1831
  • Old Wise One
Re: which head is better pm3 or pm8
« Reply #5 on: September 13, 2009, 08:53:45 PM »
Quote from: turbob16hatch on September 13, 2009, 06:09:26 PM
Quote from: ryan89crx on September 13, 2009, 04:21:21 PM
same head, different cam/springs

Would you happen to know the details on the difference between the two?

One the cams, yes I know. I believe I measured the B1 cam, but it sucks.  B2 and B7 cams are the same.
Logged
OG before the OG'#039#039s

SDRAWKCAB

  • D series BALLA!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2676
  • Rhino
Re: which head is better pm3 or pm8
« Reply #6 on: September 13, 2009, 08:57:41 PM »
b7 has better springs.
Logged
I have sex like a winning race car.
I always finish first and have left many disappointed.

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: which head is better pm3 or pm8
« Reply #7 on: September 13, 2009, 08:58:19 PM »
You laid hands on a B2 with a B7 cam swapped in, then.  I went from a B2 with B7 IM and P06 to an actual B7, with the same exhaust manifold/exhaust/etc.  There's a difference in top end.
Logged

crttaz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1831
  • Old Wise One
Re: which head is better pm3 or pm8
« Reply #8 on: September 13, 2009, 09:17:31 PM »
Quote from: Joseph Davis on September 13, 2009, 08:58:19 PM
You laid hands on a B2 with a B7 cam swapped in, then.  I went from a B2 with B7 IM and P06 to an actual B7, with the same exhaust manifold/exhaust/etc.  There's a difference in top end.

Nope, it was a B2 OEM cam, I still have it. 90 DX motor got sludged, supplied no oil to the cam and it seized. The car was serviced by local Honda and the head was replaced. I got the old B2 head. Still have the cam and head.

Made a great fixture.




About the B7 springs being better.....depends on when Honda changed oevr to use up old stock. 1992 and early 1993 production used D15 springs, but at some point in 1993 Honda started using D16A6 springs which are slightly stiffer.
Logged
OG before the OG'#039#039s

turboblack2door

  • Full Member
  • ***
  • Offline Offline
  • Posts: 129
Re: which head is better pm3 or pm8
« Reply #9 on: September 14, 2009, 07:56:33 AM »
Quote
About the B7 springs being better.....depends on when Honda changed oevr to use up old stock. 1992 and early 1993 production used D15 springs, but at some point in 1993 Honda started using D16A6 springs which are slightly stiffer.
by looking at the head is there anyway to tell what springs? Also my b7head has threaded where the vtec solenoid   would bolt to like my a6 and the b2 doesnt
Logged
93 Honda Civic Del Sol -F22A6, H22 trans, Bisi rods, Aris pistons, Hondata S300, 1200cc RC injectors, e85, Koni Yellows, Ground Controls, fuck my expensive hobby

chris

  • Guest
Re: which head is better pm3 or pm8
« Reply #10 on: September 14, 2009, 03:22:48 PM »
Quote from: turboblack2door on September 14, 2009, 07:56:33 AM
Quote
About the B7 springs being better.....depends on when Honda changed oevr to use up old stock. 1992 and early 1993 production used D15 springs, but at some point in 1993 Honda started using D16A6 springs which are slightly stiffer.
by looking at the head is there anyway to tell what springs? Also my b7head has threaded where the vtec solenoid   would bolt to like my a6 and the b2 doesnt



The d16a6 are painted type r red
Logged

crttaz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1831
  • Old Wise One
Re: which head is better pm3 or pm8
« Reply #11 on: September 14, 2009, 03:36:21 PM »
Quote from: turboblack2door on September 14, 2009, 07:56:33 AM
Quote
About the B7 springs being better.....depends on when Honda changed oevr to use up old stock. 1992 and early 1993 production used D15 springs, but at some point in 1993 Honda started using D16A6 springs which are slightly stiffer.
by looking at the head is there anyway to tell what springs? Also my b7head has threaded where the vtec solenoid   would bolt to like my a6 and the b2 doesnt

That is for the fuel pump, not VTEC.

:duncecap:
Logged
OG before the OG'#039#039s

turboblack2door

  • Full Member
  • ***
  • Offline Offline
  • Posts: 129
Re: which head is better pm3 or pm8
« Reply #12 on: September 14, 2009, 03:50:53 PM »
ok but its in the same place where the vtec solenoid goes
Logged
93 Honda Civic Del Sol -F22A6, H22 trans, Bisi rods, Aris pistons, Hondata S300, 1200cc RC injectors, e85, Koni Yellows, Ground Controls, fuck my expensive hobby

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: which head is better pm3 or pm8
« Reply #13 on: September 14, 2009, 04:56:07 PM »
Quote from: turboblack2door on September 14, 2009, 03:50:53 PM
ok but its in the same place where the vtec solenoid goes
In jdm land some have carbs and mechanical fuel pumps that run off the cam.
Logged
92GSR - mild interest

chris

  • Guest
Re: which head is better pm3 or pm8
« Reply #14 on: September 14, 2009, 05:11:10 PM »
Quote from: turboblack2door on September 14, 2009, 03:50:53 PM
ok but its in the same place where the vtec solenoid goes


put one there then sir.
Logged
Pages: [1]   Go Up
« previous next »