:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: need stepper motor control ideas.  (Read 4523 times)

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
need stepper motor control ideas.
« on: September 16, 2009, 09:40:59 PM »
ok, got 2 holset VGT's want to use the stock stepper for the VGT function. 

3 phase motor.  I think.  I'd like to control it with a PWM circuit or a hi-lo stitching circuit. Possibly the PWM could be attached to an internal capactior to buffer and steady the signal.  Not sure how to go about all of this. 

I know I will need a power, ground, and control input circuits.  but to make something to run it in and out according to the signal is where my knowledgabilities of electronics fail.   

Any ideas?

pic of motor with board removed
Logged

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: need stepper motor control ideas.
« Reply #1 on: September 16, 2009, 09:42:06 PM »
yes, that is a snake in the upper left, I was holding my albino corn snake when I snapped the pic.
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: need stepper motor control ideas.
« Reply #2 on: September 18, 2009, 07:07:23 AM »
I doubt that's 3 phase.  Scan both sides of the control board.
Logged

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: need stepper motor control ideas.
« Reply #3 on: September 20, 2009, 08:06:03 AM »
its a 6 phase motor then.  I was just trying to figure out if I could do somthing like this, if not I will simply use a 1/8 scale R/C servo

will post pics later of the board.
« Last Edit: September 20, 2009, 08:14:38 AM by Conceptz-X »
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: need stepper motor control ideas.
« Reply #4 on: September 20, 2009, 12:17:56 PM »
Meh, I really hate calling a DC-based H-bridge inverter drive 3 phase.  If it's anything if the sort.

Post pics of the board NOW, or I drive to AL and kick your MR2.
Logged

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: need stepper motor control ideas.
« Reply #5 on: September 20, 2009, 01:22:42 PM »

There appeared to be 3 proximity sensors for the motor, they broke upon removal



Unmolested it looks like this:
« Last Edit: September 20, 2009, 01:25:49 PM by Conceptz-X »
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: need stepper motor control ideas.
« Reply #6 on: September 20, 2009, 03:40:10 PM »
How about usable pictures?  Ones where I can make out the components.
Logged

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: need stepper motor control ideas.
« Reply #7 on: September 20, 2009, 03:53:16 PM »


Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: need stepper motor control ideas.
« Reply #8 on: September 20, 2009, 03:56:38 PM »
How about you use the scanner on the fax/scan/printer all-in-one unit at your workplace, and bring me something I can see.  It's hard reversing a board without being able to figure out wtf the chips are or having half a clue where the traces go.
Logged

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: need stepper motor control ideas.
« Reply #9 on: September 20, 2009, 04:04:44 PM »
my understanding is the ECM uses CAN to communicate with this motor.

the board is about 4 or 5 layers, not many visable traces
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: need stepper motor control ideas.
« Reply #10 on: September 20, 2009, 05:45:43 PM »
Communication protocol is what it is.

What chip directly controls the motor is something else entirely.
Logged

colt45

  • Mista Pimpsta
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8992
Re: need stepper motor control ideas.
« Reply #11 on: September 21, 2009, 03:46:22 AM »
so whats a stepper motor?
Logged

Kain

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6030
Re: need stepper motor control ideas.
« Reply #12 on: September 29, 2009, 03:47:46 PM »
Quote from: colt45 on September 21, 2009, 03:46:22 AM
so whats a stepper motor?

like a pregnant hooker.
Logged

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: need stepper motor control ideas.
« Reply #13 on: September 29, 2009, 07:35:16 PM »
I'll just use a servo to simplify it.  it'll look RHMT.  I got other shit to occupy my time and thoughts right now
Logged

bigdaddyvtec

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8948
  • Go outside and play hide and go fuckyourself
Re: need stepper motor control ideas.
« Reply #14 on: September 29, 2009, 08:07:20 PM »
Im confused are yhou referencing like a basic astamp to run the thing or the actual "on board controller"
Logged
http://i256.photobucket.com/albums/hh166/joeymisanthropy/Misce/TURBOTHIS.jpg

H series 35 pounds... Will turn you out!
 ---GFI we build FAST---

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: need stepper motor control ideas.
« Reply #15 on: September 29, 2009, 08:14:39 PM »
Quote from: bigdaddyvtec on September 29, 2009, 08:07:20 PM
Im confused are yhou referencing like a basic astamp to run the thing or the actual "on board controller"

No, he said he'd use a servo.   :mexi:
Logged

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: need stepper motor control ideas.
« Reply #16 on: September 30, 2009, 12:44:05 AM »
Quote from: Joseph Davis on September 29, 2009, 08:14:39 PM
Quote from: bigdaddyvtec on September 29, 2009, 08:07:20 PM
Im confused are yhou referencing like a basic astamp to run the thing or the actual "on board controller"

No, he said he'd use a servo.   :mexi:

I'll just use a 1/8 scale R/C high torque servo to control it from the EMS.  The project has time.  Getting my ass divorced and out from this shithole is my current priority.  Later when I have the time/money, expect some VGT craziness. 
Logged
Pages: [1]   Go Up
« previous next »