:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

BDVT's BroDozzer gets compound twin turbos!... (link)

Pages: [1]   Go Down

Author Topic: finaly started but need help  (Read 6850 times)

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
finaly started but need help
« on: January 07, 2010, 08:16:06 PM »
b18b:
wiseco -12cc pistons
eagle rods
stock crank
mostly stock head
stock cams

Fuckin thing I got fuel and spark but it will not start. 93 dx chassi auto sub harness. the damn thing just keeps turnin but wont fire I checked timing three times and it's fine. I did a comp test and it was 120 118 123 98 the engine has never been ran so i figured that the comp was low due to rings not bein seated and sealed yet. brand new ignition every thing I am out of ideas anyone got a shot that might work.
« Last Edit: January 07, 2010, 10:31:26 PM by jdmhatchracer94 »
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

danz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6783
  • 0-60 in 2.7 seconds
Re: damn car wont start
« Reply #1 on: January 07, 2010, 09:00:51 PM »
most likely the tune

new injectors?

try jacking up the offset.
Logged
10.510 @ 133.09 mph D16Z6 EJ6
10.912 @ 127.33 mph D16A6 ED6

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: damn car wont start
« Reply #2 on: January 07, 2010, 10:19:52 PM »
no tune stock ecu. got it running idle is good but when it decels it wants to die. I turned the fp to 45psi and that seemed to help but I dunno

I need a tune if anyone wants to help out I got a chipped ecu and log and burner but I have never tuned before and dont want to blow this thing up
« Last Edit: January 07, 2010, 10:21:45 PM by jdmhatchracer94 »
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

chris

  • Guest
Re: finaly started but need help
« Reply #3 on: January 07, 2010, 10:36:33 PM »
Is it idling smooth? Vacuum leaks?
Logged

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note
Re: finaly started but need help
« Reply #4 on: January 07, 2010, 10:39:07 PM »
Pm me specs and ur email I'll send u crome bin that might help
Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: finaly started but need help
« Reply #5 on: January 07, 2010, 10:52:07 PM »
idle is decent. I adjusted the tps I got 4.5v at wot and .43 at close
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

98vtec

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1076
  • try a warm glass of shut the fuck up
    • BBmoto Tuning
Re: finaly started but need help
« Reply #6 on: January 10, 2010, 09:49:57 PM »
get it tuned and stop complaining.
Logged
xXx Performance Tuning
-- In House DynoJet
SouthEast Neptune Tuner

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: finaly started but need help
« Reply #7 on: January 11, 2010, 03:39:30 AM »
Quote from: 98vtec on January 10, 2010, 09:49:57 PM
get it tuned and stop complaining.

Got to get it to move and stop b4 you can tune it. Like fix the clutch, and brakes.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: finaly started but need help
« Reply #8 on: January 11, 2010, 05:25:07 PM »
brakes done clutch still working on but the fucking thing keeps dieing on me and I dunno what the fuck it is. Dies on decel idles fine when u decel from driving it drops off and dies and suggestions
« Last Edit: January 11, 2010, 05:34:44 PM by jdmhatchracer94 »
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: finaly started but need help
« Reply #9 on: January 11, 2010, 05:48:29 PM »
With the car running, Unplug your iacv, and adjust your throttle blade untill its at where you want it to idle. Shut off the car. Reset your tps, reset your ecu plug iac back in and call it a day. (This is if you have one of the pbt tb without the idle screw.)
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: finaly started but need help
« Reply #10 on: January 11, 2010, 06:06:56 PM »
that could be it yeah mine doesnt have idle screw
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: finaly started but need help
« Reply #11 on: January 11, 2010, 07:35:48 PM »
Quote from: jdmhatchracer94 on January 11, 2010, 06:06:56 PM
that could be it yeah mine doesnt have idle screw

Try it man. Thats how I set mine up. I bet if you unplug your iac, while your car is idling It will want to die.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: finaly started but need help
« Reply #12 on: January 11, 2010, 10:35:36 PM »
nice she is runnin good now I could only get the tps to read 4.45 at wot though .51 closed
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother
Pages: [1]   Go Up
« previous next »