:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Got video of your car doing rippers or dirty 2/3rds? post them up! (link)

Pages: [1]   Go Down

Author Topic: Cool tool to make for $7.83  (Read 6575 times)

96turboracer

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 913
Cool tool to make for $7.83
« on: June 05, 2010, 11:25:00 PM »
Or even less if you've got some of these parts lying around.

I bought new just because they're cheap anyway.

Vise grips: $6.99

Exhaust clamp: $1.38

Washer: $.45

Apologies if this is a repost of something people have seen before. I hadn't so I thought it was the best thing since sliced bread.

I got a bead roller awhile back, but I don't have the dies for it yet. They're taking forever to get to me, and I wanted to make my intercooler pipes. I wanted to bead the ends of them, and i found this fantastic tool on some random DSM board.







The pictures are pretty self evident, but for the slow of mind:

The upper portion is the exhaust clamp housing that sits on the outside of the tube, the washer on the lower jaw is what goes inside the tube and pushes up to make the bead. Generally I would make two passes, the second time with more pressure to make a higher bead. I'm sure if I made a third pass I could get even more out of it, but so far I'm extremely pleased with the results:







Obviously the tubing has to be thin enough that you can bead it in the first place, but for under $8 bucks I'm loving this thing.

Thanks for looking
Sky
Logged

highroller54

  • I caught the fable Novacorn
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10830
  • Spreading the rhmt word like PB&J
Re: Cool tool to make for $7.83
« Reply #1 on: June 05, 2010, 11:49:51 PM »
I seen the dsm link to, I was going to make one but I haven't built any pipes latley. That will change here very soon.
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif

CSaddict

  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10484
Re: Cool tool to make for $7.83
« Reply #2 on: June 06, 2010, 06:08:20 AM »
Well played. I added it to the reference thread.
Logged
Your fat ass is just going to drive around in your pile of shit car that is marketed towards 40 yr old recently divorced women trying to be hot shit.

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6789
  • I look around and all I see is Smegheads
Re: Cool tool to make for $7.83
« Reply #3 on: June 06, 2010, 10:29:17 AM »
Nice tool fab.

I use this:

found in my build thread.

This tool in this thread look good. Probably faster to use, as long as you use large enough pliers or vise grip for leverage.
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: Cool tool to make for $7.83
« Reply #4 on: June 07, 2010, 02:16:37 AM »
Gigantic channel locks would probably take less effort for thicker stuff.

I'm really liking all these ideas. Just as effective as a $$$ geared bead roller at a fraction of the cost.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

Passenger

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1954
Re: Cool tool to make for $7.83
« Reply #5 on: June 07, 2010, 11:48:11 AM »
Quote from: HiProfile on June 07, 2010, 02:16:37 AM
Gigantic channel locks would probably take less effort for thicker stuff.

I'm really liking all these ideas. Just as effective as a $$$ geared bead roller at a fraction of the cost.

Not if you have to do SS though.
Logged

Lowerit

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 101185
Re: Cool tool to make for $7.83
« Reply #6 on: June 07, 2010, 12:39:06 PM »
Logged
fuck you
Pages: [1]   Go Up
« previous next »