Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[turbostd]

anyone have experience with the cdm gauges that are on ebay? I need to get 2 sets of electrical gauges (one for my vx and one for my camaro) And found these: http://cgi.ebay.com/ebaymotors/MK1-3-GAUGE-KIT-BOOST-AIR-FUEL-OIL-PRESSURE-WATER-TEMP-_W0QQcmdZViewItemQQhashZitem588632570dQQitemZ380208568077QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Are they any good? Any other places to get cheep electric gauges? I want electric for the easier install and for the lack of hot oil in the cabin. I had the plastic line fall off on my camaro and hot oil in your lap at 70mph is no fun 

[CSaddict]

I use Harbor Freight boost gauges and they seem fine.

[turbostd]

Yea I saw those when i was in HF the other day and was wondering about them. Do they have electric oil press and watter temp gauges there too?

[92CXyD]

I use the fuel pressure gauge from those guy in th egay link. It works fine.

As for the nylon line used for oil pressure, I'd switch to the 0.125" copper line it will work better. ;D :yes:

[random-strike]

ive had better luck with chink electric gauges than autometer ones

[1slow91hf]

the only CDM gauges ill run
http://www.glowshiftdirect.com/
ive had 3 diff sets from them all better and longer lasting then my autometer
also cheaper on Egay

[hotrex]

i second the glow shift.   top notch bizizzle

[highroller54]

never had a autometer brake yet, I 've also had good luck with vdo.

[crttaz]

Water temp gauge that goes to 320 F???

Beyond 240-250 is a waste of dial space, motor is already toast by then.

[Phate]

Water temp gauge that goes to 320 F???

Beyond 240-250 is a waste of dial space, motor is already toast by then.

If you look, all of their temp guages have the same readings, other than saying "water" or "oil" or "trans"

[2slow]

Some egay oil pressure gauges go all the way up too 200psi