Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ryan89crx]

SRP 75.5mm a6 slugs...SRP recommends .0020"-.0025" p2w clearance. is this enough? or should i go a little more? engine made just over 300hp before and will make more this time around  :yes:

[dvst8r]

I like .0035 - .0040, but Vitara's seem to do really well at .00FUCKING HUGE so who knows.

[brine04]

The SRP's in my ls/vtec are .0035

[onlyflash944]

if you are building a motor that you think will be running for say the next 40k miles, then the id go with the 20 or 25.  if this is your build and toy project, go big or go home

[ratcityrex]

If you car going to run big boost I would say 32-35 and call it a day

[ryan89crx]

If you car going to run big boost I would say 32-35 and call it a day

ya i think im going to go with .0032

i ran the factory SRP clearance before and there is a little rubbing on the skirt. expanded a bit too much

thanks fuckers 

[Joseph Davis]

0.003-0.0035" are my vote.

[ifly87]

oh god....I have .008 on my vitara's, been fine for the last 10k