:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Daspoop/Trevor YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: Overheating, headgaskety issue  (Read 4129 times)

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Overheating, headgaskety issue
« on: August 25, 2009, 09:37:17 AM »
Soooo, we replaced the headgasket on a friend's CRV a couple weeks ago, and yesterday it started overheating again, and he said there's oil in the radiator.

He decided not to have the head machined and head studs replaced last time, so I'm assuming the head is warped and/or bolts are stretched (they were way overtorqued when we removed it).

Anything else that could be checked?  I'm assuming headgasket isn't reusable?
Logged

Foowee

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1816
Re: Overheating, headgaskety issue
« Reply #1 on: August 25, 2009, 10:59:08 AM »
 ???  6000 posts n you still don't know how to check if stuff is flat?   :?: 

It already got hot enough to pop one gasket.  Get that head milled...  buy a new hg
Logged

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: Overheating, headgaskety issue
« Reply #2 on: August 25, 2009, 12:44:56 PM »
It's not my car, so why check shit I don't have to?

I told him to have it milled when it was originally off but he's cheap.

BTW, I will stab you.
Logged

88dx

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7885
Re: Overheating, headgaskety issue
« Reply #3 on: August 25, 2009, 12:53:59 PM »
Tell him since he's a cheap ass now he has to pay for it again since he halfassed it the first time.
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: Overheating, headgaskety issue
« Reply #4 on: August 25, 2009, 01:31:33 PM »
Tell him to pull the head and wip out the belt sander!  O0
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

Towdogg

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2834
  • Cfm's don't roll through an air intake!
Re: Overheating, headgaskety issue
« Reply #5 on: August 25, 2009, 01:36:51 PM »
Tell him to listen to what the fuck you tell him or you won't help him out....  Easy as that....   Now its gonna cost double....
Logged

nos10racer

  • Guest
Re: Overheating, headgaskety issue
« Reply #6 on: August 25, 2009, 01:39:22 PM »
i wouldnt even continue talking to him since he is a retard
Logged

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: Overheating, headgaskety issue
« Reply #7 on: August 25, 2009, 03:20:04 PM »
Quote from: nos10racer on August 25, 2009, 01:39:22 PM
i wouldnt even continue talking to him since he is a retard

Haha, he's alright, just likes to learn the hard way I guess...

He's attempting to buy an Acura TL today in the mean time.

Was pretty sure it's a combination of head warpage and/or stretched studs, just not my car and would rather make sure there's no other bullshit before I have to help him with this again...
Logged

chris

  • Guest
Re: Overheating, headgaskety issue
« Reply #8 on: August 25, 2009, 03:53:28 PM »
You can reuse head bolts I do it all the time and on motors that lasted forever without issue



The head needs to be milled that is a must. Its cheap and does the job. New headgasket is a must also


Most machine shops will charge 40-70 to mill a head


If you want to really do it right get new headbolts also.
Logged

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: Overheating, headgaskety issue
« Reply #9 on: August 25, 2009, 04:35:56 PM »
Yeah, I wanted him to do it right the first time...  Gonna have him replace all that shit, really don't feel like working on it again.
Logged

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: Overheating, headgaskety issue
« Reply #10 on: August 25, 2009, 07:49:48 PM »
Has one at work, did something like that, 2 head jobs (resurface) later put a motor in the bitch.   Noticed there was no oil restrictor in the block, not sure if it had anything to do with it
Logged
Pages: [1]   Go Up
« previous next »