:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Got video of your car doing rippers or dirty 2/3rds? post them up! (link)

Pages: [1]   Go Down

Author Topic: 3" pipe on a 5 bolt t3 outlet flange, here is 1 way to do it.  (Read 3252 times)

weirtech

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2341
    • Weir Technologies Inc.
3" pipe on a 5 bolt t3 outlet flange, here is 1 way to do it.
« on: October 02, 2009, 07:24:25 PM »
here is a comparison between a 2.5" downpipe being replaced with a 3" downpipe, both on a 5 bolt t3 outlet flange.  basically, how i do it is i take a 3" pipe, weld it onto the flange almost all the way around except near the 3 bolt holes that are close to the pipe.  i throw it in my arbor press and use a rounded off punch to press the divot in the pipe to make clearance for the bolt head, then weld around it.


Logged

patsmx5

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1584
Re: 3" pipe on a 5 bolt t3 outlet flange, here is 1 way to do it.
« Reply #1 on: October 02, 2009, 07:39:16 PM »
good idea. I realized I should have done this (dent the pipe around the bolts) right after I got done welding mine out and finding out the bolt heads hit the welds... Will do this next time for sure.
Logged
Quote: Originally Posted by Adam Hopkins
There is no such thing as too much boost. You could have too little rod, piston, or sleeve. But never too much boost.

j.h.christ

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6347
  • Compl3x is a giant faggot
Re: 3" pipe on a 5 bolt t3 outlet flange, here is 1 way to do it.
« Reply #2 on: October 02, 2009, 08:05:13 PM »
hotrex does it with a hammer
Logged
http://img38.imageshack.us/img38/8090/lolcart.gif
"quotquotI spent most of my money on booze and women. The rest I just wasted."quotquot

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: 3" pipe on a 5 bolt t3 outlet flange, here is 1 way to do it.
« Reply #3 on: October 02, 2009, 08:22:42 PM »
yeah i use a hammer and a "custom" flat head screw driver. O0
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: 3" pipe on a 5 bolt t3 outlet flange, here is 1 way to do it.
« Reply #4 on: October 03, 2009, 02:19:19 AM »
I did that on my last 2 downpipes, the only problem is trying to get a fucking wrench on it. What works best is to not center it, and give that middle bolt as much room. That way the top/bottom holes have more clearance to start with. A ball-end allen wrench will solve most problems, but recently I decided a hmt flange drilled for a Garrett GT 3" 4-bolt flange would be better. I have some cad drawings that shows it working, in theory... I don't think many people would like a flange for a flange, but it's tits if you want a more compact setup than a v-band.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

BlkGSR

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 12
Re: 3" pipe on a 5 bolt t3 outlet flange, here is 1 way to do it.
« Reply #5 on: October 11, 2009, 02:51:08 PM »
Fuck a 5-bolt flange... mine is horrible, can only squeeze four of the 5 bolts in. Will be going to a 5-bolt to V-band flange very soon.

Good job though, if mine had those parts punched in I probably wouldn't have a problem.
Logged

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: 3" pipe on a 5 bolt t3 outlet flange, here is 1 way to do it.
« Reply #6 on: October 11, 2009, 03:57:25 PM »
hiprofile. your right on the offset working very good for keeping the bolt spacing as far away as possible. i done this and it works good.  :yes:
Logged

Ravage70

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6286
  • The Hotrex foot. Stiletto ready!
Re: 3" pipe on a 5 bolt t3 outlet flange, here is 1 way to do it.
« Reply #7 on: October 11, 2009, 11:59:05 PM »
no shit
Comon Weir we aren't idiots... Besides, a hammer is the first thing I use in every situation; whether it be smashing flush a protruding screw or cracking eggs for breakfast.
Logged

danz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6783
  • 0-60 in 2.7 seconds
Re: 3" pipe on a 5 bolt t3 outlet flange, here is 1 way to do it.
« Reply #8 on: October 12, 2009, 02:13:38 AM »
nice work weir.

we did this on my buddys 3inch down pipe.  tacked to either side of the bolt hole. used a punch to dent it, then welded it up!

worked good!
Logged
10.510 @ 133.09 mph D16Z6 EJ6
10.912 @ 127.33 mph D16A6 ED6

Towdogg

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2834
  • Cfm's don't roll through an air intake!
Re: 3" pipe on a 5 bolt t3 outlet flange, here is 1 way to do it.
« Reply #9 on: October 13, 2009, 07:57:26 PM »
This is gool looking shit..... nice and clean.....
Logged
Pages: [1]   Go Up
« previous next »