Topic: Economy sucks 92 paseo build (Read 18772 times)

hotrex · « **Reply #30 on:** March 31, 2009, 09:29:01 PM »

alot of work for gay output

Conceptz-X · « **Reply #31 on:** March 31, 2009, 09:35:56 PM »

I don't think there are many performance parts for that engine available

fearsomedan · « **Reply #32 on:** March 31, 2009, 10:23:06 PM »

Quote from: AstroVannin on March 31, 2009, 08:36:33 PM

Awesome harness.

Have you got the turbo for it yet?

Not yet. The chinese t380 is still available. I might take it and at the very least, I can have another cdm turbo failure thread.

Quote from: Conceptz-X on March 31, 2009, 09:15:04 PM

I have a running 4AGE. make offer Can get a vid if you need.

in Columbus, GA area

It's just my daily driver so I'm not getting too crazy with it.

Quote from: hotrex on March 31, 2009, 09:29:01 PM

alot of work for gay output

I was planning on just an afc hack and injectors, but I got a great deal on the emanage.

Quote from: Conceptz-X on March 31, 2009, 09:35:56 PM

I don't think there are many performance parts for that engine available

I haven't bothered to try to find any. The turbo will be the only performance add on that I will do to it.

AstroVannin · « **Reply #33 on:** April 01, 2009, 07:52:29 AM »

Quote from: Conceptz-X on March 31, 2009, 09:35:56 PM

I don't think there are many performance parts for that engine available

Theres not much, and what there is, is expensive.

At least he got to start with the 16v .... I used the 3E 12 valve

HiProfile · « **Reply #34 on:** April 02, 2009, 02:18:01 AM »

Quote from: hotrex on March 31, 2009, 09:29:01 PM

alot of work for gay output

Kinda like working to buy a manifold off you. :somb:

He doesn't even have $500 into the complete deal, give him a break.

fearsomedan · « **Reply #35 on:** April 02, 2009, 01:41:07 PM »

Well it runs. The first try I had no rpm signal. I went ahead and picked up a wiring diagram from my job and found that the pin out for the ecu was different than the one I was using that I found online. The one online and from the greddy instalation manual was close except for 2 wires which I had to switch over. The car started on the first try and it ran pretty decent. I wanted to post up the maps, but I did not know how. I still need to get a wideband when money allows me to. I think I will gather the turbo items and make the manifold first.

fearsomedan · « **Reply #36 on:** April 04, 2009, 07:21:53 PM »

I picked up the turbo. I'm taking a risk on a cdm piece. I kept checking my local craigslist, but all the turbos were too big or too much for what I wanted. They call it a t380.

fearsomedan · « **Reply #37 on:** April 14, 2009, 08:37:08 PM »

Fluxcored mani is done. I picked up a stock manifold from u pull, hacked off the flange and used piping from an old set of headers from my monte before I went turbo with it.

Test fit. I will probably go with a civic half radiator. If not, I will put some kind of shielding on this radiator.

Another angle

papercuts · « **Reply #38 on:** April 14, 2009, 09:58:50 PM »

sweet build and topmount none teh less.

seajay2525 · « **Reply #39 on:** April 14, 2009, 10:16:28 PM »

Looks good so far.

brine04 · « **Reply #40 on:** April 14, 2009, 10:19:55 PM »

Good progress. Do you drive your monte very often?

patsmx5 · « **Reply #41 on:** April 14, 2009, 10:27:25 PM »

Badass. Need more pics though.

fearsomedan · « **Reply #42 on:** April 14, 2009, 10:29:58 PM »

Quote from: brine04 on April 14, 2009, 10:19:55 PM

Good progress. Do you drive your monte very often?

Not lately. Since I got it painted I just haven't felt like taking it out much.

fearsomedan · « **Reply #43 on:** April 14, 2009, 10:39:03 PM »

Quote from: patsmx5 on April 14, 2009, 10:27:25 PM

Badass. Need more pics though.

The car is still stock, but I'll post pics as I progress with the kit.

fearsomedan · « **Reply #44 on:** April 15, 2009, 08:18:13 PM »

I picked up a civic half radiator. It went on with the stock radiator hoses.

92CXyD · « **Reply #45 on:** April 15, 2009, 08:54:51 PM »

That is bad ass I'm thinking picking one of these up and doing 4age 20v Blacktop conversion and seeing that the civic half rad. fits like that could come in handy for future reference. ;D

crx-ecutioner313 · « **Reply #46 on:** April 15, 2009, 10:57:35 PM »

my 92 paseo is a fast as it come soon to be bored 5efe 50 shot nos and some bolt ons all on this already prestine car

92CXyD · « **Reply #47 on:** April 15, 2009, 11:00:31 PM »

Quote from: crx-ecutioner313 on April 15, 2009, 10:57:35 PM

my 92 paseo is a fast as it come soon to be bored 5efe 50 shot nos and some bolt ons all on this already prestine car

LOL yeah right

crx-ecutioner313 · « **Reply #48 on:** April 15, 2009, 11:02:34 PM »

hey watch you mouth there civic boy the car is a icon

92CXyD · « **Reply #49 on:** April 15, 2009, 11:07:13 PM »

The only paseo in wyoming that rides 1 in of the ground. ;D :somb:

crx-ecutioner313 · « **Reply #50 on:** April 15, 2009, 11:08:18 PM »

soon my freind the crx will be home and the paseo will be back in the parking mode again wwwwwoooooooooooo

crx-ecutioner313 · « **Reply #51 on:** April 15, 2009, 11:11:09 PM »

ne way thats a 4 inch drop by no means slamed

crx-ecutioner313 · « **Reply #52 on:** April 15, 2009, 11:16:11 PM »

as we all can tell this guy hasnt got enough cash for a honda so he must use what he has my paseo is so sexy and fast im scared to drive it when i hit the gas she bounces off the road from power

fearsomedan · « **Reply #53 on:** April 24, 2009, 07:27:31 PM »

Intercooler.

Intercooler installed

oil feed and drain flange

green91 · « **Reply #54 on:** May 02, 2009, 06:47:05 PM »

Great work, ive always wanted to see how one of these would handle mods. Although i am a little concerned about your manifold holding up to heat and weight on it. Did you brace it at all?

enikolayev · « **Reply #55 on:** May 03, 2009, 04:07:51 AM »

I think the manifold will be fine, its pretty close to the head.

Good to see one of this build, i have been thinking of turbocharging my corolla

fearsomedan · « **Reply #56 on:** May 03, 2009, 08:52:41 AM »

Quote from: green91 on May 02, 2009, 06:47:05 PM

little concerned about your manifold holding up to heat and weight on it. Did you brace it at all?

I am planning to brace it when it's ready to be bolted in for the last time.

crx-ecutioner313 · « **Reply #57 on:** May 06, 2009, 12:47:11 AM »

i got the complete 1992 paseo runs and everything herer if you wanna buy it

boosted 00 black si · « **Reply #58 on:** May 06, 2009, 11:26:19 AM »

nice little sleeper

News:

Author Topic: Economy sucks 92 paseo build (Read 18772 times)

crx-ecutioner313

crx-ecutioner313

crx-ecutioner313

crx-ecutioner313

crx-ecutioner313

crx-ecutioner313